Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Computer extremely slow during and after clean install and reboots.

3 Weeks Ago   #31
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok Paul actually if you use ImgBurn for the ISO burn try the 2.4x speed it is better still4x is considered the highest you should burn at. Doesn't take that much longer.
Sorry mate can't give you a link the broadband is so bad tonight.


My System SpecsSystem Spec
.
3 Weeks Ago   #32
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Thanks ICIT2LOL.
Nice early night then?
My System SpecsSystem Spec
3 Weeks Ago   #33
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I have obviously been monitoring what I have been doing.

I have reinstalled again eventually and run the DeskUpdate which comes with the Fujitsu computer and finds new drivers and software. I installed the drivers (System devices, other devices, display adapters, mice and other pointing devices and network adapters) that it found but NOT the software.
After these installs there were no errors in the device manager.

I DIDN'T try to install any of the updates:

(01) KB3191492 - I.E.11 (54,605 KB) - Restart needed.
(02) KB3020369 (09,352 KB) - Servicing Stack Update April 2015.
(03) KB3125574 (488,32 KB) - SP2 sort of.
(04) KB3172605 (29,960 KB) - This one is IMPORTANT.
(05) KB3192391 (81,053 KB) - 2016, October.
(06) KB3197867 (90,132 KB) - 2016, November.
(07) KB3205394 (64,498 KB) - 2016, December.
(08) KB3212642 (06,335 KB) - 2017, January.
(09) KB4012212 (33,976 KB) - 2017, March.
(10) KB4015546 (38,425 KB) - 2017, April.
(11) KB4019263 (31,287 KB) - 2017, May.
(12) KB4022722 (48,130 KB) - 2017, June.
(13) KB4025337 (27,080 KB) - 2917, July.

Instead I ran Windows update.
It needed to download and install Windows Update Agent 7.6.7600.320, which I did and that was OK.
I then run Windows update and after about 10 minutes the system crashed and rebooted.
When it did this, I got the following BSOD, which I usually get when it crashes.
I just thought this might help!


Attached Thumbnails
Computer extremely slow during and after clean install and reboots.-20170731_194713.jpg  
My System SpecsSystem Spec
.

3 Weeks Ago   #34
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok mate now this is a hardware problem in all likelihood for thaterror code just a it says in the blue screen message. Now how aboutif you install again and I see that Fujitsu DeskDate stuff isthe one to use from their support site why they justcannot post the individual drivers is a pain in the neck because Ithink this is a way for them to add stuff you donít really want.
Look this is the support site from the US because I cannot get the UK one to download and it does give you drivers as per what is normally given http://support.fujitsupc.com/CS/Port...=Notebook%20PC just make absolutely sure the model number is correct because although I have your board details it does not reflect the actual model you have it will be on the bottom of the machine somewhere and should be something like A530 now the US site lists it as AH530 but I am hoping the drivers are the same.

Worth a shot anyway because as I said the UK site is ruddy hopeless. It might be an idea to put those drivers onto a stick and then install them to the machine from it but I would steer clear of the ones that are Fujitsu marked for the time being unless you do not get a picture or screen for example.

I just wished that blue screen had dumped some files. I have probably asked before but make sure the drive is cleaned not just formatted with diskpart on another machine because Windows cannot clean itself in situ for obvious reasons.
Disk - Clean and Clean All with Diskpart Command just clean will do the trick it will show the drive as unallocated - the install from the media will do the formatting and partitioning. Use that ISO I linked too.

Now just how old did you say this machine was??
My System SpecsSystem Spec
2 Weeks Ago   #35
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Thanks for the reply and detailed explanation.

TASK 1:
I am going to clean with DiskPart and then reinstall using the recovery DVD that came with the computer. I will then install the BIOS, Video (Intel), Video (ATI), Bluetooth and WLAN (Atheros) driver updates from the USB that were downloaded from the site you provided.
The DeskUpdate that I previously ran I ran directly after the installation had completed and could be the problem then!!!

NOTE: I am going to run DiskPart like this...
Quote   Quote: Originally Posted by Megahertz07 View Post
Boot from the M$ installation disk, go to maintenance, open a Cmd window and you will be able to run the commands.
TASk 2:
If TASK 1 doesn't work, when I get my delivery of DVD's (hopefully within the next 2 days) I will download the ISO you suggested and burn it to DVD using ImgBurn at 2.4x speed.
When I have done this will I need to download and install ALL the drivers from http://support.fujitsupc.com/CS/Port...=Notebook%20PC or will Windows update find them?

Although the computer was bought for my Father back in 2012 it only has about 250 hours of use, the majority of these hours are trying to get a clean install .

Thanks in advance.
My System SpecsSystem Spec
2 Weeks Ago   #36
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok Paul mate I have to go offline very shortly because my broadband is slower than writing a letter and it has to be fixed by a techie.

I only asked the age of the machine thinking that if it were very old the hard drive may be knackered not to put too fine a point on it but is any case it might be worth while testing it anyway when you can use this
http://www.seagate.com/au/en/support...ls-win-master/ you need only to run the short generis unless you have the time for the long one. I shall catch up with you tomorrow as my net is faster usually in the mornings.
My System SpecsSystem Spec
2 Weeks Ago   #37
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Hi ICIT2LOL,

Quote   Quote: Originally Posted by Paul Black View Post
I downloaded and ran the SeaTools for Windows. I ran:

(1) S.M.A.R.T.
(2) Short Drive Self Test.
(3) Short Generic.
(4) Long Generic (this took quite a while).

...and they all PASSED.
Thanks in advance.
My System SpecsSystem Spec
2 Weeks Ago   #38
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I have tried to download ImgBurn from two different places and my antivirus says about OpenCandy.
\setupImgBurn_2.5.8.0.exe, Found MalSign.OpenCandy.7AF
Have you got a safe download site please.
My System SpecsSystem Spec
2 Weeks Ago   #39
Paul Black

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

My Brother-in-law bought a new HDD round that he has lent to me which I put in.

I have managed to install Windows 7 Home Premium SP1 x64 from the recovery DVD that came with the computer without any problems, NO BSODís, so it is definitely my HDD that is faulty.

Megahertz07 gave me an ISO link for the above system which I downloaded and burnt to a DVD to make a bootable installation disk.

My question is, can I clean install Windows using this bootable installation disk?

The reason I ask is because I tried to download the ISO myself from here...

https://www.microsoft.com/en-gb/software-download/windows7

...and got this message below.

Will it accept my ProductCode using the ISO that Megahertz07 gave me even though I got this message.


Attached Thumbnails
Computer extremely slow during and after clean install and reboots.-img_20170802_213817.jpg  
My System SpecsSystem Spec
2 Weeks Ago   #40
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Paul mate sorry I have been late but I am having extreme broadband problems at the momne or I would have answered sooner. Yes ImgBurn is a pig of a site to download form and I would have steered you to the right site but Megahertz has sorted that.

So regarding the ISO yes that is a proper site to download it from because I think it requires a valid key - which you have on a sticker on that machine - before it wil download anything you just need to get the right version ie Home or Pro and 32 or 64bit.

The best thing about doing it from an ISO is that you will not get any of the factory bloatware and the updates will not be as many because the ISO is already had a lot of it's content fixed whereas if the media was old then there would be a lot of patches to be don as well as updates. There will be quite a few mind you so I would set the updates to let you know first before downloading and installing then as I find that as I do not use Skype for example I can untick that from the listing/s.

So in summary as long as you have a valid key for that motherboard then the ISO will be fine just make sure the disk is clean not just formatted it will be done along with any partitioning during the install process.

This might also be a chance to install an SSD if your budget will allow or you could get one of the hybrid drives - that is a spinner with a small SSD part built into it or a spinner that is a 7200 rpm model the older 5400rpm ones are woefully slow.
This is a guide to what I have just put down SSDs vs. hard drives vs. hybrids: Which storage tech is right for you? | PCWorld < be ready to shut off that annoying small video at the start.

Having said all that I would personally contact Microsoft explain the situation to them and they are likely to let you se the key that Fujitsu used I would tell them that Fujitsu is unable to supply such a media and in all reality that probably would be the case if you contacted them.
John
My System SpecsSystem Spec
Reply

 Computer extremely slow during and after clean install and reboots.




Thread Tools




Similar help and support threads
Thread Forum
Extremely slow Windows 7 Installation (Clean)
My friend's Computer recently crashed and fails to boot up. It had 2 partitions (1 HDD) and was to the brink of its capacity. Seeing that it was no longer booting up, I initially tried loading up an install CD and attempted to repair the windows install. This attempt failed when it told me that the...
Installation & Setup
After a clean install.. my internet is extremely slow.
On Thursday I decided I was going to do a clean install of windows 7. I initially had windows home, but installed windows 7 pro this time. I created a backup on my external and proceeded to do a clean install. When the install was finished. I installed the motherboard drivers, then the video...
Network & Sharing
Win 7 clean install on new computer, extremely slow loading apps
solved
Performance & Maintenance
Extremely slow boot+log-on, poor performance after clean install
Well, I guess I'll just jump right into this. As the title says, I recently did a clean install of Windows 7 (deleted all my hard drive partitions, including the system reserved one, reformatted and then installed Win7) and since then I've been noticing some strange issues that I did not experience...
Performance & Maintenance
Extremely slow startup after Windows 7 clean install
I recently did a clean install from Windows Vista 32 bit to Windows 7 Ultimate 64 bit. Each time I try to restart or turn on my computer, it takes about 15 minutes to boot. It gets stuck at the starting Windows screen for the majority of that time and it looks like the hard drive does not show...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:08.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App