Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Upgraded dying HDD to SSD and now things are slower.

11 Oct 2018   #1
Chipman417

Windows 7 Ultimate x64
 
 
Upgraded dying HDD to SSD and now things are slower.

So yesterday i noticed that my Seagate 750GB HDD was starting to go out. So i ran to Best Buy and picked up a 1TB Samsung 860 EVO SSD to replace it. I used Acronis Disk Director 12 to clone the drive. Since the SSD was brand new I had to initialize the disk first. I chose Basic MBR. and since the SSD was larger than the source drive i opted to go with proportional volume resizing. never selected that option before but I felt it was the best option. I'm not sure how long the process was supposed to take but it was like 3.5 - 4 hours. i had the SSD installed in the laptop second drive bay and the HDD in a USB 3.0 enclosure kit plugged into a SS USB port. after the process completed 4 or so hours later i unplugged the enclosure kit from the laptop and rebooted. When i bought my first SSD for this laptop and cloned it, there was a massive noticeable difference all around. Boot speed greatly increased, Installation timed dropped dramatically, and overall system performance was amazing. i can't say i experienced the same with this upgrade. I'm still debating doing a brand new windows 10 install on the Samsung 1TB and running the 500GB crucial as my storage drive. Just hasn't happened yet. But anyways i don't see a performance/speed change at all and actually it seems to be running slower. Opening folders and performing installations actually feels laggy to me. I'm not quite sure what could be causing this. You would think that something as easy as navigating drives and folders would actually be lightning F****** fast after the upgrade. I wondering if maybe i did something wrong? Or maybe there is a BIOS setting that i need to change in order for my SSD to operate properly. If you guys have any thoughts or advise or need any additional info please reach out to me. I run my company on this Laptop so it kind of needs to work properly, especially for QuickBooks. Thanks in advance.


My System SpecsSystem Spec
.
12 Oct 2018   #2
samuria

win 8 32 bit
 
 

You may have made a big mistake if the old disk had bad sectors and you did a normal clone it ill have copied the bad sectors to the new disk. Some cloning software have a special setting to not copy bad blocks. The other thing is is there were bad blocks you dontknow what files are corupt.


You need to go to the old disk makers site and download their free test software and see if it had bad sectors on it. If its written these to the new disk its very hard to undo it.


A clean install first deleting all paritionsis the best option
My System SpecsSystem Spec
12 Oct 2018   #3
Chipman417

Windows 7 Ultimate x64
 
 

Thank you Samuria for the quick reply.
This may or not make a difference, I will go to Seagate's website and grab that software, but before i went out and picked up the SSD i downloaded Crystal Disk Info and looked at the S.M.A.R.T. rating/valuation of the HDD. It said it was still good. Then i ran chkdsk /r on each partition and both came back with no bad sectors. The degradation of the drive seemed mechanical. It was making irregular noises when turned on. Don't know if that makes a difference of the clone quality either. I read that when running chkdsk /r, if bad/unrepairable sectors are found then the HDD is told to skip them upon future use. Which I assume would apply to cloning also.
Next step is to download that software from Seagate and start the whole process over.
Is there any software you would recommend using on the SSD after reformatting to help guarantee optimal performance? I was so excited to have my entire system running on SSD's with plenty of storage.
My System SpecsSystem Spec
.

12 Oct 2018   #4
samuria

win 8 32 bit
 
 

If the clone was sector by sector it does copy bad blocks the other possability is you havent optimized the drive as often 7 doesnt do it Optimize Windows for SSDs - Thomas-Krenn-Wiki
My System SpecsSystem Spec
17 Oct 2018   #5
cokiere

Microsoft Windows 7 Ultimate 64 bit 7601 Multiprocessor Free Service Pack 1
 
 

Hi
I have the same problem. I tried two SSD. First one with original windows 7 HP, second one with my windows 7 ultimate.
Both of them are bad performance. The notebook start very quick but when I open browser and windows all blocking.
I update all driver without improving.
Any suggestion is appreciated
see you
My System SpecsSystem Spec
20 Oct 2018   #6
Megahertz07

Windows 7 HP 64
 
 

Even if you have a healthy HDD, when you install a SSD you should always do a fresh install.

It is mandatory if you have a failing HDD. Never clone a failing drive, always do a fresh install.

And if you want to save money, install a small SSD (128G) for Windows and programs and use a HDD for data.
You will have the speed of a SSD and the space of a HDD at low cost.
My System SpecsSystem Spec
Reply

 Upgraded dying HDD to SSD and now things are slower.




Thread Tools




Similar help and support threads
Thread Forum
computer has got slower & slower to start up
Hi my win 7ultimate 64B with a gigabyte Ep41T-UD3L MB has slowler & slower starting up from a cold start Takes up to 30M to even get to bios But If tumned off for no more than 5mins, starts OK immediately I have tried different memory slots but no difference There is also a slight whine...
General Discussion
Windows 7 Ultimate x64 Upgraded RAM from 4gb to 8gb. Seems slower.
I recently bought a 4gb stick of RAM. and installed it onto my Aspire X3950 Motherboard. The two previous sticks are "GU512303EP0202 Unifosa 2GB GDDR3-1333 DIMM RAM Memory" and the are installed in the 2 slots of the 'white' channel. The new 'third' stick I just installed is "PNY Optima 4GB 240-Pin...
Hardware & Devices
Suddenly opening things is slower
Alright, so I have this bad problem on my laptop. I have had it for about a year now, and nothing bad has happened to it, apart from one virus about half a year ago, which was supposedly wiped off my system. As of now, whenever I open something up, it loads REAL slow. For example, when I open up...
General Discussion
Extkernal hard drive slow access speeds getting slower and slower
I have a problem with my Hitachi 3tb duo pro drive external hard drive. As i put more files it seems to get slower in one folder. An example is today, the access speed to find a patients name in it ( about 6k folders) would take about 30 secs. Before that it would only take 10 seconds and when i...
Performance & Maintenance
I upgraded to Windows 7 and now my internet is slower
I have been using Ubuntu Linux on a laptop for 2 years, and have had internet speeds of about 50-100 kbp/s. Today I bought an HP Pavilion DV6-1354US, and my internet connection now tops at about 7 kbp/s, with the same ethernet connection. What's the deal? And how can I fix it?
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:57.
Twitter Facebook Google+