Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What's your memory assessment speed?

20 Mar 2009   #91
bloke

Windows 7 7600 x64 (16385) Ultimate,Windows Vista x64 Ultimate
 
 

Quote   Quote: Originally Posted by smarteyeball View Post
Spinning Cubes FTW
u mean wtf?


My System SpecsSystem Spec
.
20 Mar 2009   #92
bloke

Windows 7 7600 x64 (16385) Ultimate,Windows Vista x64 Ultimate
 
 

Quote   Quote: Originally Posted by Jacee View Post
@ bloke... PC Pitstop Optimize2 hasn't been tested with Win 7. You don't need it anyway
yeh i wasnt too sure, i d/led it to check it out but didnt actually use it, like i said i tried a similar prog on vista x64 and it corrupted my registry cos it wasnt designed for x64 just x32, thought id ask anywayz.

anyone know of a good defragger for win7 x64?
My System SpecsSystem Spec
20 Mar 2009   #93
jfar

Vista Ult64, Win7600
 
 

Hi BLOKE, Thanks for the reply I will go now and see if I can find out all the info you talked about and see if I can fix this ,Thank You And AUSLOGIGS is a good Defragger.
My System SpecsSystem Spec
.

20 Mar 2009   #94
smarteyeball

 
 

Quote   Quote: Originally Posted by bloke View Post
lol its more of a brag rights thing to sit it at 4ghz, it is only 170mhz away from my 3.83 stable setup so not much point. maybe 4.2ghz
lol, yeah. e-peen is ok, but if it's not going to give an increase in FPS, then a few hundred points on a few scores isn't really worth running the chip so hard. Then again...

Quote   Quote: Originally Posted by bloke View Post
i just thought the mem speed would have more of an affect than fsb settings on ram. guess we learn something new everyday. 83mhz increase on fsb, 34mhz decrease on ram= 100mb/s increase in winsat.
Yep. I don't feel so bad about running my 1100mhz ram at 888mhz anymore. If I want the speed, up the FSB

+1 for Auslogics defragger too.
My System SpecsSystem Spec
21 Mar 2009   #95
bloke

Windows 7 7600 x64 (16385) Ultimate,Windows Vista x64 Ultimate
 
 

got my cpu stable at 3.9ghz, 1837mhz fsb, mem is at 2004mhz (1002mhz) got the timings as low as i could go, not too different from when i was running them at 1801mhz.
cpu idle is 1.320, 100% intel burn test drops as low as 1.264-1.248, i set the vcore in bios to 1.36325 and the bios value shows 1.32. goes to show how much vdroop these things have, and it gets worse when getting into a higher fsb/vcore which is why i think i have so much trouble going over 3.9ghz. anyway...

winsat increases a little.
What's your memory assessment speed?-winsat.jpgWhat's your memory assessment speed?-screen01.jpg


My System SpecsSystem Spec
21 Mar 2009   #96
Mark

Windows 7 Ultimate Vista Ultimate x64
 
 

Looks good bloke, has your WEI gone up.
My System SpecsSystem Spec
21 Mar 2009   #97
bloke

Windows 7 7600 x64 (16385) Ultimate,Windows Vista x64 Ultimate
 
 

Quote   Quote: Originally Posted by Mr GRiM View Post
Looks good bloke, has your WEI gone up.
no mind you if i had 7057 it prob would as 7000 x64 is limited to 5.9 for ram, even if you theoretically score more than 5.9 and only have 4gb ram it will not tell you which sucks. but whether it goes up is a different story in 7057.

i seem to hit a wall at 1885fsb, i reduced the multi to 7, under clocked my ram so it wouldn't be an issue, and hit the fsb to 1886, no post. 1885 it posts no problem? i suppose this is the disadvantage of a 8.5 multiplier. and 1885 fsb with 8.5 multi is 4005mhz, which i cant get to boot anyway. lol
My System SpecsSystem Spec
21 Mar 2009   #98
smarteyeball

 
 

It's looking good either way mate

I've got weird issues with vdroop. CPU-Z shows my volts going UP instead of DOWN when running IBT and P95.... ie idle at 1.336 then under load up to 1.344 and higher etc I don't know if it's LLC or something else, but I have a high overshoot that needs to be tweaked
My System SpecsSystem Spec
21 Mar 2009   #99
bloke

Windows 7 7600 x64 (16385) Ultimate,Windows Vista x64 Ultimate
 
 

Quote   Quote: Originally Posted by smarteyeball View Post
It's looking good either way mate

I've got weird issues with vdroop. CPU-Z shows my volts going UP instead of DOWN when running IBT and P95.... ie idle at 1.336 then under load up to 1.344 and higher etc I don't know if it's LLC or something else, but I have a high overshoot that needs to be tweaked
yeh sounds like the llc feature, have you tried looking for a pencil mod or something for your bored?
My System SpecsSystem Spec
21 Mar 2009   #100
smarteyeball

 
 

Yeah, so far I haven't found one. Haven't really searched to hard TBH. All the references I've found mention that the LLC is "supposed" to be the pencil mod

I crash like the Hindenburg with it disabled
My System SpecsSystem Spec
Closed Thread

 What's your memory assessment speed?




Thread Tools




Similar help and support threads
Thread Forum
What's your memory assessment speed? [2]
Continued from - https://www.sevenforums.com/performance-maintenance/5400-whats-your-memory-assessment-speed.html I decided to open a thread to show what people are getting with there current memory settings, what improvements are shown with various timing tweaks, speed settings ect. to access...
Performance & Maintenance
CPU Speed, BCLK and Memory Speed: Boot failure.
Probably I am in the right section for this issue. If not, please move it. A couple of days ago I changed the motherboard and processor, but not the RAM as the RAM is apparently compatible with that board as stated in GIGABYTE - Motherboard - Socket 1150 - GA-B85M-D3H (rev. 1.0/1.1) ... Now, I...
PC Custom Builds and Overclocking
Memory speed - wrong memory???
Hi. I am hoping you can help with an issue I am having with memory in my sons PC. It does not seem to be running as good since I installed 16gig of memory. Motherboard - ASUSTeK Computer INC. M5A78L-M/USB3 Processor - AMD FX-4100 @ 3.60 GHz It had 1 4gig stick of Kingston KVR1333D3N9 but I...
Hardware & Devices
What's your hard drive assessment speed?
I'm curious to see what other people are getting for their WEI disk scores. I would like to see all types and combinations of drives to see how they differ in performance. If possible try to keep HDTach/HDTune/etc. scores to a minimum as there is another thread for that. Some general questions...
Performance & Maintenance
Memory Assessment Speed
Just a curious question; I ran winsat mem a couple of weeks ago and got a 13600+ read. Ran it today and got 15985 read. Only system change was adding a Radeon 6670 Video card. Does memory speed change this much ? What might cause the disparity ?
Performance & Maintenance
Memory speed
I have 4 Gb of corsair 1600MHz C9 DDR3 memory installed on an Asus Crosshair III Formula 790FX motherboard. The motherboard specs said that it supported 1600 MHz memory, yet the memory is only running at 1333 MHz. Do I need to OC the M/board in someway to get the full speed out of the memory...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:39.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App