Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What's your memory assessment speed?

10 Jul 2011   #1211
digitalrurouni

Windows 7 x64 Pro
 
 

Quote   Quote: Originally Posted by A Guy View Post
Quote   Quote: Originally Posted by digitalrurouni View Post
This is what CPU-Z is telling me. I have not done any serious overclocking or tweaking in a while so I am a bit rusty...go a bit gentle on me :P
That does say you are running at 1600MHz. What does the SPD tab show? Your specs don't say how much ram you have. You are indeed running 3 dimms, triple channel? I don't see Corsair on the QVL (Qualified Vendor List), so I can't get much info. Obviously it's working, and I suspect it isn't an issue. Perhaps when Dave76 or another hardware Guru comes by, they will have some ideas.

A Guy
My specs show 6 GB of ram. I have a feeling it could be that theoretical bandwidth could be higher with the Sandy Bridge dual channel architecture though I am not sure. I am probably just speaking blah blah at this point in time. I am gonna look in to this XMP profile in my BIOS and see if I can figure something out.


My System SpecsSystem Spec
.
10 Jul 2011   #1212
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Quote   Quote: Originally Posted by digitalrurouni View Post
Quote   Quote: Originally Posted by A Guy View Post
Quote   Quote: Originally Posted by digitalrurouni View Post
This is what CPU-Z is telling me. I have not done any serious overclocking or tweaking in a while so I am a bit rusty...go a bit gentle on me :P
That does say you are running at 1600MHz. What does the SPD tab show? Your specs don't say how much ram you have. You are indeed running 3 dimms, triple channel? I don't see Corsair on the QVL (Qualified Vendor List), so I can't get much info. Obviously it's working, and I suspect it isn't an issue. Perhaps when Dave76 or another hardware Guru comes by, they will have some ideas.

A Guy
My specs show 6 GB of ram. I have a feeling it could be that theoretical bandwidth could be higher with the Sandy Bridge dual channel architecture though I am not sure. I am probably just speaking blah blah at this point in time. I am gonna look in to this XMP profile in my BIOS and see if I can figure something out.
The only 2 differences I see are you run tripple channel and I am dual, and you have 1600mhz ram and mine is 1866.
My System SpecsSystem Spec
10 Jul 2011   #1213
digitalrurouni

Windows 7 x64 Pro
 
 

Ok so I did some reading about my motherboard and all that. Turns out my Uncore needed to be set up to twice the DDR3 RAM frequency...so now that it is set to the correct value, here is my latest score. I am sure there are a plethora of non optimal settings in my motherboard right now and it will take me a bit of reading and tweaking to get it to where I want it But what do you guys think? It's quite a decent boost from what it was previously!


Attached Images
What's your memory assessment speed?-winsatmemscore.jpg 
My System SpecsSystem Spec
.

10 Jul 2011   #1214
YTBOY83

Windows 7 64Bit Ultimate Edition SP1
 
 

6.00 GB Dual-Channel DDR2 @ 401MHz


Attached Images
What's your memory assessment speed?-untitled.png 
My System SpecsSystem Spec
10 Jul 2011   #1215
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

Quote   Quote: Originally Posted by essenbe View Post
Quote   Quote: Originally Posted by profdlp View Post
In my case, it's DDR3 RAM @1600 in Triple-Channel.
Prof, where is your score? I haven't seen it.
It's about a dozen or so pages back. Here's one from today:


Attached Images
What's your memory assessment speed?-winsat-mem-10july2011.jpg 
My System SpecsSystem Spec
10 Jul 2011   #1216
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Quote   Quote: Originally Posted by profdlp View Post
Quote   Quote: Originally Posted by essenbe View Post
Quote   Quote: Originally Posted by profdlp View Post
In my case, it's DDR3 RAM @1600 in Triple-Channel.
Prof, where is your score? I haven't seen it.
It's about a dozen or so pages back. Here's one from today:

Good score.
My System SpecsSystem Spec
10 Jul 2011   #1217
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by digitalrurouni View Post
Ok so I did some reading about my motherboard and all that. Turns out my Uncore needed to be set up to twice the DDR3 RAM frequency...so now that it is set to the correct value, here is my latest score. I am sure there are a plethora of non optimal settings in my motherboard right now and it will take me a bit of reading and tweaking to get it to where I want it But what do you guys think? It's quite a decent boost from what it was previously!
Nice bump, it's just numbers, but indicative of proper setup. A Guy
My System SpecsSystem Spec
10 Jul 2011   #1218
kellymac35

WINDOWS 7 Ultimate x64 Full
 
 

Quote   Quote: Originally Posted by A Guy View Post
Quote   Quote: Originally Posted by essenbe View Post
Quote   Quote: Originally Posted by A Guy View Post

Show off!

A Guy
That's about the only thing I have that I can show off with
There is the light saber...

A Guy
Here is a light saber 1.25 Watt Arctic SPYDER lite a match from 14 ft away


Attached Thumbnails
What's your memory assessment speed?-dscf8572.jpg  
My System SpecsSystem Spec
10 Jul 2011   #1219
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Quote   Quote: Originally Posted by kellymac35 View Post
Quote   Quote: Originally Posted by A Guy View Post
Quote   Quote: Originally Posted by essenbe View Post

That's about the only thing I have that I can show off with
There is the light saber...

A Guy
Here is a light saber 1.25 Watt Arctic SPYDER lite a match from 14 ft away

OK, I'll bite. What is an Artic Spyder?
My System SpecsSystem Spec
10 Jul 2011   #1220
kellymac35

WINDOWS 7 Ultimate x64 Full
 
 

A laser
My System SpecsSystem Spec
Closed Thread

 What's your memory assessment speed?




Thread Tools




Similar help and support threads
Thread Forum
What's your memory assessment speed? [2]
Continued from - https://www.sevenforums.com/performance-maintenance/5400-whats-your-memory-assessment-speed.html I decided to open a thread to show what people are getting with there current memory settings, what improvements are shown with various timing tweaks, speed settings ect. to access...
Performance & Maintenance
CPU Speed, BCLK and Memory Speed: Boot failure.
Probably I am in the right section for this issue. If not, please move it. A couple of days ago I changed the motherboard and processor, but not the RAM as the RAM is apparently compatible with that board as stated in GIGABYTE - Motherboard - Socket 1150 - GA-B85M-D3H (rev. 1.0/1.1) ... Now, I...
PC Custom Builds and Overclocking
Memory speed - wrong memory???
Hi. I am hoping you can help with an issue I am having with memory in my sons PC. It does not seem to be running as good since I installed 16gig of memory. Motherboard - ASUSTeK Computer INC. M5A78L-M/USB3 Processor - AMD FX-4100 @ 3.60 GHz It had 1 4gig stick of Kingston KVR1333D3N9 but I...
Hardware & Devices
What's your hard drive assessment speed?
I'm curious to see what other people are getting for their WEI disk scores. I would like to see all types and combinations of drives to see how they differ in performance. If possible try to keep HDTach/HDTune/etc. scores to a minimum as there is another thread for that. Some general questions...
Performance & Maintenance
Memory Assessment Speed
Just a curious question; I ran winsat mem a couple of weeks ago and got a 13600+ read. Ran it today and got 15985 read. Only system change was adding a Radeon 6670 Video card. Does memory speed change this much ? What might cause the disparity ?
Performance & Maintenance
Memory speed
I have 4 Gb of corsair 1600MHz C9 DDR3 memory installed on an Asus Crosshair III Formula 790FX motherboard. The motherboard specs said that it supported 1600 MHz memory, yet the memory is only running at 1333 MHz. Do I need to OC the M/board in someway to get the full speed out of the memory...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 06:12.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App