Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What's your memory assessment speed?

21 Apr 2012   #1751
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Getting a bit better and software opens and runs a bit faster too
What's your memory assessment speed?-maxxmem.jpg




My System SpecsSystem Spec
.
23 Apr 2012   #1752
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Latest, and IE8 is running.
What's your memory assessment speed?-maxxmem3.jpg


My System SpecsSystem Spec
23 Apr 2012   #1753
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Nice job, Gary. Well done.
My System SpecsSystem Spec
.

23 Apr 2012   #1754
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

After the new settings and just taken right now


Attached Images
What's your memory assessment speed?-now.png What's your memory assessment speed?-now1.png 
My System SpecsSystem Spec
23 Apr 2012   #1755
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by essenbe View Post
Nice job, Gary. Well done.
Thank you!
Quote   Quote: Originally Posted by Solarstarshines View Post
After the new settings and just taken right now
Quite good numbers Solar! Higher than I ever got with my Phenoms.
My System SpecsSystem Spec
24 Apr 2012   #1756
windude99

Windows 7 Professional x64 Service Pack 1
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post
After the new settings and just taken right now
Nice scores!
My System SpecsSystem Spec
24 Apr 2012   #1757
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Nice scores, MR. Solarstarshines.
My System SpecsSystem Spec
01 May 2012   #1758
Chrisb647100

Windows 7 Professional 64bit
 
 
The need for speed!

This is my 12 GB OCZ Gold Triple-channel memory running with stock timings.

What's your memory assessment speed?-winsatmemscreenshot.jpg

I think I can be pretty happy with these scores because they are stock, but what suggestions would you have for adjusting the timings and maybe the voltage. I have OC'ed a processor and graphics card before, but haven't fooled around much with the voltages, mainly because I don't want another Chernobyl. I bricked both a graphics card and a CPU learning how to do it "safely". There's nothing like real world experience and some hard knocks to learn you. Needless to say, I've got most of the dont's down, but how about some do's? Any specific timings and voltages that worked in a similar setup would be helpful, as would any of yours real world experience to avoid any more bumps. I'd like to push the memory voltages a bit without risking total meltdown. Muhahaha!


My System SpecsSystem Spec
01 May 2012   #1759
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Give the timings listed in JEDEC#4 a try without a voltage bump. If it won't boot, try a +.01 or so. You can try 8-9-9-20 too.
My System SpecsSystem Spec
02 May 2012   #1760
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Go to your BIOS and tell us what the DRAM and IMC (VTT CPU) voltage settings are.
Looks like your RAM is at 1066MHz, which is the default frequency.
Strange there is no XMP setting listed on the SPD tab, it may be AMD RAM, or just OCZ not playing right.
If it's running ok, then no problems.

You really don't need to adjust the voltages unless you are going to increase the RAM frequency, unless the RAM is unstable now.
If you increase the frequency above 800MHz (RAM frequency 1600MHz) then you will probably need more volts to sustain it.

In your motherboard manual under Extreme Tweaker menu there is a Memory Frequency setting, if you want to increase the RAM frequency.
Quote:
Memory Frequency [Auto]
Forces a DDR3 frequency slower than the common tCK detected via SPD.
Configuration options: [Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3_1333MHz] [DDR31600MHz]
[DDR3-1866MHz] [DDR3_2133MHz] [DDR3_2400MHz] [DDR3_2666MHz]
There is no 2000MHz setting, you might have to go with 1866MHz, unless you want to OC the CPU. Then it will all depend on the base clock setting.
Timings should be in the 10-10-10-30 (CAS-TRCD-TRP-TRAS), tRFC 88, Command rate 2T range, this may take some trial and error testing.
Since you should keep the DRAM and VTT CPU voltage settings within 0.50v and this would take DRAM at 1.65v and the VTT CPU at 1.15v minimum.
You are going to basically have to OC the RAM to get higher than 1066MHz, with all of the tweaking and testing that will be involved.

If they had a RAM XMP or even SPD setting at 2000MHz, it would be so much easier.
My System SpecsSystem Spec
Closed Thread

 What's your memory assessment speed?




Thread Tools




Similar help and support threads
Thread Forum
What's your memory assessment speed? [2]
Continued from - https://www.sevenforums.com/performance-maintenance/5400-whats-your-memory-assessment-speed.html I decided to open a thread to show what people are getting with there current memory settings, what improvements are shown with various timing tweaks, speed settings ect. to access...
Performance & Maintenance
CPU Speed, BCLK and Memory Speed: Boot failure.
Probably I am in the right section for this issue. If not, please move it. A couple of days ago I changed the motherboard and processor, but not the RAM as the RAM is apparently compatible with that board as stated in GIGABYTE - Motherboard - Socket 1150 - GA-B85M-D3H (rev. 1.0/1.1) ... Now, I...
PC Custom Builds and Overclocking
Memory speed - wrong memory???
Hi. I am hoping you can help with an issue I am having with memory in my sons PC. It does not seem to be running as good since I installed 16gig of memory. Motherboard - ASUSTeK Computer INC. M5A78L-M/USB3 Processor - AMD FX-4100 @ 3.60 GHz It had 1 4gig stick of Kingston KVR1333D3N9 but I...
Hardware & Devices
What's your hard drive assessment speed?
I'm curious to see what other people are getting for their WEI disk scores. I would like to see all types and combinations of drives to see how they differ in performance. If possible try to keep HDTach/HDTune/etc. scores to a minimum as there is another thread for that. Some general questions...
Performance & Maintenance
Memory Assessment Speed
Just a curious question; I ran winsat mem a couple of weeks ago and got a 13600+ read. Ran it today and got 15985 read. Only system change was adding a Radeon 6670 Video card. Does memory speed change this much ? What might cause the disparity ?
Performance & Maintenance
Memory speed
I have 4 Gb of corsair 1600MHz C9 DDR3 memory installed on an Asus Crosshair III Formula 790FX motherboard. The motherboard specs said that it supported 1600 MHz memory, yet the memory is only running at 1333 MHz. Do I need to OC the M/board in someway to get the full speed out of the memory...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:08.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App