Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What's your memory assessment speed?

04 Nov 2009   #331
Prince

Windows 7 ultimate
 
 

Hi,

I've didn't have the time to read all the thread but there's something I'm concerned about this memory test. I'm actually running OCZ PC 8500 5-6-6-18. As I never got it to 1066mhz and it always shows under PC2 6400 800, I set the setting in auto into the bios. Now, I get different results in the test. The first time it was around 5.2k and sometimes I get like 6.7. ANy idea why?


My System SpecsSystem Spec
.
04 Nov 2009   #332
torrentg

7600.20510 x86
 
 

No but you should match the voltage and timings to what OCZ website says for your memory.

OCZ typically needs a higher VDIMM (voltage) to run well.

If you have this, set it to 2.1v. http://www.ocztechnology.com/product...b_dual_channel

For overclocking, you can go to 2.15v safely.
My System SpecsSystem Spec
04 Nov 2009   #333
Prince

Windows 7 ultimate
 
 

I did match voltage and timing but no success really, CPU-Z show this and everest too. I've google'ed around and it seems my mobo isn't compatible with these rams. Using EP43. Not quiet sure, though.


Attached Thumbnails
What's your memory assessment speed?-memory.jpg  
My System SpecsSystem Spec
.

04 Nov 2009   #334
Prince

Windows 7 ultimate
 
 

If I can't reach the indicated setting when changing the voltage and timing, should I leave it to auto or leave it as it?
My System SpecsSystem Spec
04 Nov 2009   #335
torrentg

7600.20510 x86
 
 

Which motherboard? There's probably some setting to adjust to get full speed rating of ram instead of underclocking it like it seems to be now.
My System SpecsSystem Spec
04 Nov 2009   #336
Prince

Windows 7 ultimate
 
 

EP-43-UD3L is the mobo.

PS: Is there any others softwares than CPU-Z & Everest to watch the memory?
My System SpecsSystem Spec
04 Nov 2009   #337
Prince

Windows 7 ultimate
 
 

Just tried the memory test again and I get the 2 different results once again.


Attached Thumbnails
What's your memory assessment speed?-mem1.jpg  
My System SpecsSystem Spec
04 Nov 2009   #338
Odelay

Windows 7 Ultimate x64
 
 

Give this a read: OCZ Forum - Announcements in Forum : Memory Product Support Archive (Read Only)

As torrentgsuggested you need to up the voltage to get the performance you want.

Post your results :]
My System SpecsSystem Spec
04 Nov 2009   #339
Prince

Windows 7 ultimate
 
 

Quote   Quote: Originally Posted by Odelay View Post
Give this a read: OCZ Forum - Announcements in Forum : Memory Product Support Archive (Read Only)

As torrentgsuggested you need to up the voltage to get the performance you want.

Post your results :]
My setting are 5-6-6-18 Volt:2.1 but where else could I see results from my rams?
My System SpecsSystem Spec
04 Nov 2009   #340
Prince

Windows 7 ultimate
 
 

I forgot to mention that my fsb is at 240*12.5, which is 20% OC from a E5200 @ 2.5. I wonder if there's something I could change there.
My System SpecsSystem Spec
Closed Thread

 What's your memory assessment speed?




Thread Tools




Similar help and support threads
Thread Forum
What's your memory assessment speed? [2]
Continued from - https://www.sevenforums.com/performance-maintenance/5400-whats-your-memory-assessment-speed.html I decided to open a thread to show what people are getting with there current memory settings, what improvements are shown with various timing tweaks, speed settings ect. to access...
Performance & Maintenance
CPU Speed, BCLK and Memory Speed: Boot failure.
Probably I am in the right section for this issue. If not, please move it. A couple of days ago I changed the motherboard and processor, but not the RAM as the RAM is apparently compatible with that board as stated in GIGABYTE - Motherboard - Socket 1150 - GA-B85M-D3H (rev. 1.0/1.1) ... Now, I...
PC Custom Builds and Overclocking
Memory speed - wrong memory???
Hi. I am hoping you can help with an issue I am having with memory in my sons PC. It does not seem to be running as good since I installed 16gig of memory. Motherboard - ASUSTeK Computer INC. M5A78L-M/USB3 Processor - AMD FX-4100 @ 3.60 GHz It had 1 4gig stick of Kingston KVR1333D3N9 but I...
Hardware & Devices
What's your hard drive assessment speed?
I'm curious to see what other people are getting for their WEI disk scores. I would like to see all types and combinations of drives to see how they differ in performance. If possible try to keep HDTach/HDTune/etc. scores to a minimum as there is another thread for that. Some general questions...
Performance & Maintenance
Memory Assessment Speed
Just a curious question; I ran winsat mem a couple of weeks ago and got a 13600+ read. Ran it today and got 15985 read. Only system change was adding a Radeon 6670 Video card. Does memory speed change this much ? What might cause the disparity ?
Performance & Maintenance
Memory speed
I have 4 Gb of corsair 1600MHz C9 DDR3 memory installed on an Asus Crosshair III Formula 790FX motherboard. The motherboard specs said that it supported 1600 MHz memory, yet the memory is only running at 1333 MHz. Do I need to OC the M/board in someway to get the full speed out of the memory...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:51.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App