Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What's your memory assessment speed?

19 Mar 2009   #71
bloke

Windows 7 7600 x64 (16385) Ultimate,Windows Vista x64 Ultimate
 
 

im trying to use sandra pro business and im lost on how to get it to work.lol


My System SpecsSystem Spec
.
19 Mar 2009   #72
smarteyeball

 
 

Quote   Quote: Originally Posted by bloke View Post
thats 1 thing i dont get, a different o/s sometimes needs to recheck your overclocks?

i think i have only ever had 1 bsod with 7000, and it was my sound driver (wow what a surprise) but havnt seen it again. farcry2 is the only game i have troubles with but its only because of the trainer program i run with it that causes the crashes occasionally. i do get frustrated with it but its so addictive.

i dont know if i sould upgrade to 7057 or just wait. did you see much of a diff between 7000 and 7048? cos i would prob do the same as you, upgrade once then just wait, seeing as it wieghs in over 3gb a pop. (crappy bandwidth d/l)
The same games, apps with the same OC settings were working perfectly fine in Vista but as soon as I tried the same in Seven=Crash city. After a re-check, it's been fine

Performance wise, I can't say I've noticed a huge difference between 7000 to 7048. It's more the little features you tend to notice. However it's looking like the RC will be delayed, so it's hard to say whether it's worthwhile going 7057 now or not. Chances are by the time you d/l and install 7057, a new build will be released.

And yeah, Sandra is frustrating. That's why I prefer Everest.
My System SpecsSystem Spec
19 Mar 2009   #73
dizer

windows 7
 
 

What's your memory assessment speed?-capture.jpg

What's your memory assessment speed?-capture2.jpg


can anyone tell me why my memory + cpu speeds are so slow?
could i do anything to change this?




What's your memory assessment speed?-capture3.jpg


My System SpecsSystem Spec
.

19 Mar 2009   #74
Mark

Windows 7 Ultimate Vista Ultimate x64
 
 

Quote   Quote: Originally Posted by dizer View Post
Attachment 6135

Attachment 6136


can anyone tell me why my memory + cpu speeds are so slow?
could i do anything to change this?




Attachment 6137
The only way to increase it is to overclock by raising the Bus speed, yours is currently at 200Mhz (800Mhz FSB) and if you could raise it to around 300Mhz (1200Mhz FSB) and drop your multiplier to 9 so you will end up with a CPU speed of 2.7Ghz, that will speed up all components in the computer and should give you a good increase in performance. You may also have to raise your core voltage to maintain stability.
My System SpecsSystem Spec
19 Mar 2009   #75
jfar

Vista Ult64, Win7600
 
 

Hi,heres mine again, I reposted because there was a problem with the picture,I am not very happy with these figures,4096 DDR3-SDRAM. What's your memory assessment speed?-capture-mem.png


My System SpecsSystem Spec
19 Mar 2009   #76
Mark

Windows 7 Ultimate Vista Ultimate x64
 
 

Quote   Quote: Originally Posted by jfar View Post
Hi,heres mine again, I reposted because there was a problem with the picture,I am not very happy with these figures,4096 DDR3-SDRAM. Attachment 6140
That's pretty bad, it's worse than DDR2
My System SpecsSystem Spec
19 Mar 2009   #77
bloke

Windows 7 7600 x64 (16385) Ultimate,Windows Vista x64 Ultimate
 
 

Quote   Quote: Originally Posted by jfar View Post
Hi,heres mine again, I reposted because there was a problem with the picture,I am not very happy with these figures,4096 DDR3-SDRAM. Attachment 6140
do you know what speed the ddr3 is and what timings? i would guess that its 1066 or 1333 prob under clocked timings?

most ddr3 use 1.9volts as well so if you o.c. it make sure its at 1.9, mine is set to 1.975 and everest shows 1.94v. but double check the specs of the ram on the manufacturers website, they should show the specs and voltage needed to reach the stock speeds in case your mobo is under clocking your ram. when i installed mine it was set to auto, 1333 8/8/8/24 and the voltage showed around 1.5volts even though my ram is rated for those timtings but 1800 at 1.9volt.
My System SpecsSystem Spec
19 Mar 2009   #78
Fizban

Windows 7 Ultimate x64
 
 

Not impressed at all with my memory, 3080 MB/s. cpu isn't performing too badly I guess compared to what I've seen in the thread though, winsat cpu -compression gives me 97.13 MB/s
My System SpecsSystem Spec
19 Mar 2009   #79
bloke

Windows 7 7600 x64 (16385) Ultimate,Windows Vista x64 Ultimate
 
 

Quote   Quote: Originally Posted by Fizban View Post
Not impressed at all with my memory, 3080 MB/s. cpu isn't performing too badly I guess compared to what I've seen in the thread though, winsat cpu -compression gives me 97.13 MB/s
thats ok for 2gb ddr2 667, dont forget your 667 is really 333mhz (double data rate) eg: mine is 1800 which is 900mhz.

i would call that acceptable.
My System SpecsSystem Spec
19 Mar 2009   #80
Jacee
Microsoft MVP

Windows 7 Ultimate 32bit SP1
 
 

Quote   Quote: Originally Posted by smarteyeball View Post
GTLS are indeed an art of their own. A time consuming art

TBH, I've had issues with each build. I had a very rocky start with 7048, but after re-clocking and re-stressing it's been pretty good so far. I've only had one BSOD in a week. Compared to 2-5 BSOD's a day.... it's a victory

I've found that Seven is a whole lot more sensitive to slightly unstable O/C's than Vista.

I'm giving 7057 a miss and will just wait for the RC now.



Pics or it didn't happen
smarteyeball, I used PC Pitstop's TechExpress .... you know they're all different
PC Pitstop OverDrive Tests Overview

No way am I top, but my but my machine gets me where I need to go and do what I need to do
My System SpecsSystem Spec
Closed Thread

 What's your memory assessment speed?




Thread Tools




Similar help and support threads
Thread Forum
What's your memory assessment speed? [2]
Continued from - https://www.sevenforums.com/performance-maintenance/5400-whats-your-memory-assessment-speed.html I decided to open a thread to show what people are getting with there current memory settings, what improvements are shown with various timing tweaks, speed settings ect. to access...
Performance & Maintenance
CPU Speed, BCLK and Memory Speed: Boot failure.
Probably I am in the right section for this issue. If not, please move it. A couple of days ago I changed the motherboard and processor, but not the RAM as the RAM is apparently compatible with that board as stated in GIGABYTE - Motherboard - Socket 1150 - GA-B85M-D3H (rev. 1.0/1.1) ... Now, I...
PC Custom Builds and Overclocking
Memory speed - wrong memory???
Hi. I am hoping you can help with an issue I am having with memory in my sons PC. It does not seem to be running as good since I installed 16gig of memory. Motherboard - ASUSTeK Computer INC. M5A78L-M/USB3 Processor - AMD FX-4100 @ 3.60 GHz It had 1 4gig stick of Kingston KVR1333D3N9 but I...
Hardware & Devices
What's your hard drive assessment speed?
I'm curious to see what other people are getting for their WEI disk scores. I would like to see all types and combinations of drives to see how they differ in performance. If possible try to keep HDTach/HDTune/etc. scores to a minimum as there is another thread for that. Some general questions...
Performance & Maintenance
Memory Assessment Speed
Just a curious question; I ran winsat mem a couple of weeks ago and got a 13600+ read. Ran it today and got 15985 read. Only system change was adding a Radeon 6670 Video card. Does memory speed change this much ? What might cause the disparity ?
Performance & Maintenance
Memory speed
I have 4 Gb of corsair 1600MHz C9 DDR3 memory installed on an Asus Crosshair III Formula 790FX motherboard. The motherboard specs said that it supported 1600 MHz memory, yet the memory is only running at 1333 MHz. Do I need to OC the M/board in someway to get the full speed out of the memory...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:31.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App