What's your memory assessment speed?

My new laptop score



its even faster than my desktop computer

I keep playing with my ram....I had 2x2gb HyperX + 2x2gb Kvalue ram =8GB

With the results on the left in latency score 83.5 and winsat mem 47.84.37 plus few problems in gaming.


So i removed the 2x2gb Kvalue ram and leave only my 2x2gb HyperX 5-5-515 v1.8

Then i set my q6600 9x266 to 6x400 and my ram to 2.00D so now i have the 1:1

I run memtest for 10 rounds overnight without errors.

The results on the right are really better with latency score 75.3 and winsat mem 60.38.31

I notice a general improvement in my system.

Good job, Panais. Nice improvement.

panais said:

I keep playing with my ram....I had 2x2gb HyperX + 2x2gb Kvalue ram =8GB

With the results on the left in latency score 83.5 and winsat mem 47.84.37 plus few problems in gaming.


So i removed the 2x2gb Kvalue ram and leave only my 2x2gb HyperX 5-5-515 v1.8

Then i set my q6600 9x266 to 6x400 and my ram to 2.00D so now i have the 1:1

I run memtest for 10 rounds overnight without errors.

The results on the right are really better with latency score 75.3 and winsat mem 60.38.31

I notice a general improvement in my system.

essenbe said:

Good job, Panais. Nice improvement.

Thanks Steve :)

It seems that the 1:1 is very important at the end

As is the much faster Ram running without the Value Ram. The memory controller in the CPU is also only running 2 dimms now. 8 doesn't always beat 4 :)

A Guy

A Guy said:

As is the much faster Ram running without the Value Ram. The memory controller in the CPU is also only running 2 dimms now. 8 doesn't always beat 4 :)

A Guy

Yes your right. :)

Also the FSB : RAM 1:1 helps.

Without the 1:1 the score is lower.

Congrats panais, the value RAM was slowing down the other RAM and your system, good job on the tweaking.

Dave76 said:

Congrats panais, the value RAM was slowing down the other RAM and your system, good job on the tweaking.

Thanks Dave76 :)


Guys what is your opinion about the famous FSB : DRAM 1:1?


A! also my Q6600 is 9x266 and i set it to 6x400,(without change any voltage)is that overclocking??? Is that bad for the CPU?

As for the 1:1, all motherboards run differently, so it depends on your system components.
I haven't had to use an even ratio, but that doesn't mean it won't help yours.

You are still at the stock frequency.
9x266=2394
6x400=2400

Won't have any affect on your CPU.

Dave76 said:

As for the 1:1, all motherboards run differently, so it depends on your system components.
I haven't had to use an even ratio, but that doesn't mean it won't help yours.

You are still at the stock frequency.
9x266=2394
6x400=2400

Won't have any affect on your CPU.

Thanks again Dave and all