Crash trying to come out of Standby

Hello all,

I'm having a bit of trouble when trying to get my PC out of standby/sleep mode. I would leave my computer on and go to work. When I come back and try to wake the computer using my mouse or keyboard, the computer would respond but my screen would stay blank, the monitor lights stay orange, then my computer would just reboot.

Here is my current build:

Core i7 920 Nehalem 2.66 GHz
Newegg.com - Intel Core i7 920 Nehalem 2.66GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor - Processors - Desktops

Patriot Viper 6GB (3x2GB) DDR3
Newegg.com - Patriot Viper 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory - Desktop Memory

OCZ Apex 120GB SSD
Newegg.com - OCZ Apex Series OCZSSD2-1APX120G 2.5" 120GB SATA II MLC Internal Solid state disk (SSD) - Solid State Disks

EVGA E7580-TR motherboard
Newegg.com - EVGA E758-TR 3-Way SLI (x16/x16/x8) LGA 1366 Intel X58 ATX Intel Motherboard - Intel Motherboards

EVGA GTX260
Newegg.com - EVGA 896-P3-1255-AR GeForce GTX 260 Core 216 896MB 448-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card - Desktop Graphics / Video Cards

Corsair CMPSU-850TX 850W PSU
Newegg.com - CORSAIR CMPSU-850TX 850W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready Active PFC Power Supply - Power Supplies

Attached USB devices:
WD MyBook 2TB external drive
Razer Death Adder mouse
Razer ProType keyboard

Any help would be appreciated. Please let me know any additional information is needed.

Also, attached is my WEI.



My graphics score is kinda disappointing... Any recommendations?

Thanks!

are you using the latest bios for the board?
looks like SZ2E is the latest, but a lot of the previous bios's mention S3 fixes or improvements
http://www.evga.com/forums/tm.asp?m=...ey=&#100646372

the x58 chipset based boards seem to have all had problems with sleep at the beginning, but i think most manu's fixed it with bios updates

also, have you set all the voltages, mem timings etc. manually yet?
some boards can be slightly unstable with auto settings

Thanks for your reply p7ast1k.

I have flashed my bios and will be crossing my fingers.

I will try and adjust my RAM after I get more familiar with the BIOS settings. It has been years since I've mess with BIOS settngs since it's basically a set and forget thing once you have it right. And the last time I configured a PC was probably over 6 years ago.

No cigar with the bios update...

Will try and adjust memory timing and see how that goes.

Please have a look here Fix Windows 7 Hibernation Error (STOP 0x000000A0 INTERNAL_POWER_ERROR) to see if this workaround solves the issue.\
Rgds

I have a solution; at least one that worked for me: Enable Hybrid Sleep! To do so, go to Control Panel, Power Options, then for whatever option you have active, select Change Plan Settings, then Changed Advanced Power Settings. Expand Sleep, then Allow Hybrid Sleep, then Change from Off to On (for both battery and plugged in if you have them).

This has the side benefit of very fast restart, must faster than on XP!