Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Show Us Your WEI (2)

30 Jan 2011   #1511
sygnus21

Windows 10 Pro
 
 

Quote   Quote: Originally Posted by A Guy View Post
WEI is a weird thing. My i5 750 with only a BCLK change from 133MHz to 160MHz, with all turbo and EIST enabled gets a 7.4. A Guy
I have the same setting as you - 133 to 160MHz, EIST enabled, turbo enabled. Yet I get 7.6 for my 950, 7.5 when I had my 930.

I suppose I could get to 7.7 if I pushed to 3.8GHz but I don't like the temps (76ish) I get under Prime 95 load. Anyway 3.5 is good enough for me


My System SpecsSystem Spec
.
31 Jan 2011   #1512
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Mine is the same, 133 to 160MHz, EIST enabled, turbo enabled, was getting a 7.6 but has settled to a 7.4 after about 8 months
It still seems the same and I'm very happy with it.
My System SpecsSystem Spec
31 Jan 2011   #1513
diehrd

Ultimate 7
 
 

How much does disk storage size play into the score ?
My System SpecsSystem Spec
.

31 Jan 2011   #1514
sygnus21

Windows 10 Pro
 
 

It doesn't.
My System SpecsSystem Spec
31 Jan 2011   #1515
diehrd

Ultimate 7
 
 

Thats weird my SSD only hits a 6.9 rest of rig hits 7.5 grrrrrrr
My System SpecsSystem Spec
31 Jan 2011   #1516
sygnus21

Windows 10 Pro
 
 

There are lots of things that can affect SSD performance.... Alignment, MB Controller, Controller Mode. Look through this thread - Show us your SSD performance

BTW are you using Intel's SATA controller? - Should be using Intel. And you using IDE or AHCI? - Should be using AHCI.

To be honest I haven't seen any SSD Drive below 7, so.....
My System SpecsSystem Spec
31 Jan 2011   #1517
diehrd

Ultimate 7
 
 

I am in AHCI ,, and am on sata port 1 on the main board and have to check if i is an Intel controller or not. It is the AMD 890 Chip set ,, and I may be using the win 7 driver not the amd driver that could be the issue
My System SpecsSystem Spec
31 Jan 2011   #1518
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I have the MSI 890 chipset and a Vertex2. I seem to have had better luck with Microsofts AHCI drivers. There is not a big difference but it seems better with msahci.
I didn't think you could run an intel controller on an AMD MB.
My System SpecsSystem Spec
31 Jan 2011   #1519
diehrd

Ultimate 7
 
 

Ya I just installed the AMD driver ,I am in ahci mode . When I run ATTO the drive scores well 100/255 boots fast runs perfectly ,, and scores the same 6.9 ms driver or amd BUT with the amd driver it benches better, No big deal I was just shocked with the score I figured 7 or 7.2 .. so 6.9 aint so bad
My System SpecsSystem Spec
31 Jan 2011   #1520
whs
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8
 
 

Quote   Quote: Originally Posted by diehrd View Post
Ya I just installed the AMD driver ,I am in ahci mode . When I run ATTO the drive scores well 100/255 boots fast runs perfectly ,, and scores the same 6.9 ms driver or amd BUT with the amd driver it benches better, No big deal I was just shocked with the score I figured 7 or 7.2 .. so 6.9 aint so bad
But something is wrong here. My Vertex2 showed up immediately with 7.6 - and I am not even running AHCI. The damn Sony BIOS is locked and unless I go on a jailbreak, I cannot make any settings.

Make a performance test with Atto and compare with mine:


Attached Thumbnails
Show Us Your WEI (2)-vertex2.png  
My System SpecsSystem Spec
Closed Thread

 Show Us Your WEI (2)




Thread Tools




Similar help and support threads
Thread Forum
Show Us Your Rig [8]
Spring is on and is beautifully sunny, flowered trees are green and diffuse their scents...:) My desk is lightened by...
PC Custom Builds and Overclocking
Subfolders does not show in OWA, but show in Outlook.
Hi! Running server 2008 with exchange server. The user is using both OWA webmail and local Outlook. User got multiple inbox's to access, 1 personal and 2 for the company. The personal one got subfolders which shows in OWA, but the problem is the other folders. They are only needed by this 1...
Microsoft Office
HDDs Show in BIOS, But Do Not Show in Disk Management
Hello, A newbie here that just completed a first-time new Win7 PC build. Successful installation of Win7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage. ...
Hardware & Devices
Show us your Wig
:haha:
Chillout Room
backup files will only show up if i click show hidden files and folder
Hey Guys, I cannot find a soultion to this problem. I was using my desktop like normal then an error came up saying that there was a hdd failure, and that i needed to scan for errors. all my files disappeared and only this error would come up. There would be hundreds of the same msg spamed on my...
Backup and Restore
show hidden folders show file extensions thru registry
I am trying to setup a default user or machine setup for how win7 handles folder view options. I want show hidden folders to be set to on for all users and the hide extensions for know file types to be unchecked or turned off ffor all users (so extensions show) I have located them in the registry...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:40.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App