Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Show Us Your WEI (2)

12 Feb 2011   #1631
RealGoneKid

Windows 7 Ultimate X64
 
 

Quote   Quote: Originally Posted by RealGoneKid View Post
Quote   Quote: Originally Posted by sygnus21 View Post
Quote   Quote: Originally Posted by pxsalmers View Post
I don't see any hot temperatures so nothing really to worry about. Impressive if anything. Your voltage readings on Speedfan are wack though.
Check out the temp reading.... again

Don't think they should be that low.... unless he's running liquid nitrogen.
Check out specs on my cooling system, I have a lot of fans, They shouldn't read 0 though surely?
This is the motherboards Monitor.
Attachment 138091
This is the graphics card temps too.
Show Us Your WEI (2)-graphics-card-temps.jpg




My System SpecsSystem Spec
.
12 Feb 2011   #1632
pxsalmers

Windows 7 Ultimate x64
 
 

I did check them. The accurate temps (the first 3 in Speedfan on the right and the ones listed under his motherboard) are pretty much the same, with the exception of a 1C difference on the system temperature. The Core Temps reading as 0C is most likely a software bug.

If you check my post, you will see that I have a temperature reading in HWMonitor of one component on my mobo where its reading 90C. I've seen it go as high as 200C. My computer is still functioning, therefore I doubt any part of my mobo was ever at 200C.
My System SpecsSystem Spec
12 Feb 2011   #1633
RealGoneKid

Windows 7 Ultimate X64
 
 

Quote   Quote: Originally Posted by RealGoneKid View Post
Quote   Quote: Originally Posted by sygnus21 View Post
Quote   Quote: Originally Posted by pxsalmers View Post
I don't see any hot temperatures so nothing really to worry about. Impressive if anything. Your voltage readings on Speedfan are wack though.
Check out the temp reading.... again

Don't think they should be that low.... unless he's running liquid nitrogen.
Check out specs on my cooling system, I have a lot of fans, They shouldn't read 0 though surely?
This is the motherboards Monitor.
Attachment 138091
I ran "Core Temp" (Thanks for the link) but the real temp is fot intel cpus, my AMD is not supported. Here are results.
Show Us Your WEI (2)-core-temp-results.jpg
I think you are right though, it could just be a bug, my core isnt compatiblr with a few system monitoring tools.


My System SpecsSystem Spec
.

12 Feb 2011   #1634
sygnus21

Windows 10 Pro
 
 

Maybe..... I know nothing about AMD. Perhaps someone with AMD experience can chime in on what's going on with the temp monitoring programs. Didn't even realize that Real Temp didn't work with AMD processors. I just assumed they all worked with both.

At this point in time I have no answer.

BTW on your ASROCK monitoring system it says CPU temp is 32c, which sounds far better (reasonable) than 0c. So yeah.... seems those other programs aren't reading the temps correctly. 32c to me would make much more sense than 0c.

My two cents.

And thanks
My System SpecsSystem Spec
12 Feb 2011   #1635
RealGoneKid

Windows 7 Ultimate X64
 
 

Quote   Quote: Originally Posted by sygnus21 View Post
Maybe..... I know nothing about AMD. Perhaps someone with AMD experience can chime in on what's going on with the temp monitoring programs. Didn't even realize that Real Temp didn't work with AMD processors. I just assumed they all worked with both.

At this point in time I have no answer.

BTW on your ASROCK monitoring system it says CPU temp is 32c, which sounds far better (reasonable) than 0c. So yeah.... seems those other programs aren't reading the temps correctly. 32c to me would make much more sense than 0c.

My two cents.

And thanks
Thank you for taking time to look at my problem, I think the software that came with the motherboard is trustworthy, its the only 1 which states Phenom X6 CPU ready. the 1100T only came out in December, maybe the monitoring programs don't cater for it yet. Don't know if anyone else with an AMD Phenom X6 has tried 3rd party monitors but I hope this will stop someone having a coronary when they see the monitors results.
At least 1 thing is good, Core Temp called my CPU an AM3, most of the other programs call it an AM2+, It should be AM3 but my Motherboard caters for AM2,AM2+ and AM3, that's why I got it (Only £50) really as a stepping stone between CPU's so I could still upgrade while having it still running.
My System SpecsSystem Spec
12 Feb 2011   #1636
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

I have a 1055T and coretemp and HW monitor recognize it.
My System SpecsSystem Spec
12 Feb 2011   #1637
RealGoneKid

Windows 7 Ultimate X64
 
 

Quote   Quote: Originally Posted by essenbe View Post
I have a 1055T and coretemp and HW monitor recognize it.
Thanks for the info, I just get an error saying AMD Phenom II X6 1100T not supported.
Perhaps it will be then in the next version if they cater for 1055T, so that's good news for the future.
My System SpecsSystem Spec
12 Feb 2011   #1638
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

Quite odd, as the OP in this thread has your CPU:

Asus Crosshair IV + Phenom 1100T - Overclockers Forums

A Guy
My System SpecsSystem Spec
12 Feb 2011   #1639
RealGoneKid

Windows 7 Ultimate X64
 
 

Quote   Quote: Originally Posted by A Guy View Post
Quite odd, as the OP in this thread has your CPU:

Asus Crosshair IV + Phenom 1100T - Overclockers Forums

A Guy
Perhaps I am not running the program properly?
Show Us Your WEI (2)-realtemp-error.jpg


My System SpecsSystem Spec
12 Feb 2011   #1640
RealGoneKid

Windows 7 Ultimate X64
 
 

Quote   Quote: Originally Posted by A Guy View Post
Quite odd, as the OP in this thread has your CPU:

Asus Crosshair IV + Phenom 1100T - Overclockers Forums

A Guy
Oh I see, sorry my eyes are a little weak and cyan sometimes slips right through my optical vision.
Yes HW Monitor is picking up his CPU just fine. He has a different motherboard, maybe that's it, This core is guaranteed for 3 years and I have just had it so if It is faulty it would be better to know now. Just the drama of getting a new 1, When it wouldn't install in the beginning (Due to BIOS and my lack of knowledge) the company I got it from would have sent 1 straight away, and I had 30 days to return it, Meaning i could swap it out and then send old 1 back leaving me still up and running. But don't know if that would still be a card I could play now and would perhaps have to go through AMD?
My System SpecsSystem Spec
Closed Thread

 Show Us Your WEI (2)




Thread Tools




Similar help and support threads
Thread Forum
Show Us Your Rig [8]
Spring is on and is beautifully sunny, flowered trees are green and diffuse their scents...:) My desk is lightened by...
PC Custom Builds and Overclocking
Subfolders does not show in OWA, but show in Outlook.
Hi! Running server 2008 with exchange server. The user is using both OWA webmail and local Outlook. User got multiple inbox's to access, 1 personal and 2 for the company. The personal one got subfolders which shows in OWA, but the problem is the other folders. They are only needed by this 1...
Microsoft Office
HDDs Show in BIOS, But Do Not Show in Disk Management
Hello, A newbie here that just completed a first-time new Win7 PC build. Successful installation of Win7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage. ...
Hardware & Devices
Show us your Wig
:haha:
Chillout Room
backup files will only show up if i click show hidden files and folder
Hey Guys, I cannot find a soultion to this problem. I was using my desktop like normal then an error came up saying that there was a hdd failure, and that i needed to scan for errors. all my files disappeared and only this error would come up. There would be hundreds of the same msg spamed on my...
Backup and Restore
show hidden folders show file extensions thru registry
I am trying to setup a default user or machine setup for how win7 handles folder view options. I want show hidden folders to be set to on for all users and the hide extensions for know file types to be unchecked or turned off ffor all users (so extensions show) I have located them in the registry...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 20:16.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App