Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC scannow cannot repair problem..

09 Jun 2010   #11
ryo

 
 

Quote   Quote: Originally Posted by amoretam View Post
4 memory sticks of 2gb each= 8gb

Quote   Quote: Originally Posted by ryo View Post
try like hawk suggest.
if that's still can't, i wonder that's cause into your memory, how much GB you put your memory.
try to put 2 stick of memory = 4GB and see that's happen again or not.


My System SpecsSystem Spec
.
09 Jun 2010   #12
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Amoretam,

CPU-Z CPU-Z
CPUID - System & hardware benchmark, monitoring, reporting

Gathers info on your:
CPU
  • Name and number.
  • Core stepping and process.
  • Package.
  • Core voltage.
  • Internal and external clocks, clock multiplier.
  • Supported instruction sets.
  • Cache information.
Mainboard
  • Vendor, model and revision.
  • BIOS model and date.
  • Chipset (northbridge and southbridge) and sensor.
  • Graphic interface.
Memory
  • Frequency and timings.
  • Module(s) specification using SPD (Serial Presence Detect) : vendor, serial number, timings table.
System
  • Windows and DirectX version.
My System SpecsSystem Spec
09 Jun 2010   #13
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

PC Wizard will have all that plus a little more included in that program.
My System SpecsSystem Spec
.

09 Jun 2010   #14
amoretam

Windows 7 x64bit Home Premium
 
 

Are you suggesting to post this CPU-Z report here??

Quote   Quote: Originally Posted by karlsnooks View Post
Amoretam,

CPU-Z CPU-Z
CPUID - System & hardware benchmark, monitoring, reporting

Gathers info on your:
CPU
  • Name and number.
  • Core stepping and process.
  • Package.
  • Core voltage.
  • Internal and external clocks, clock multiplier.
  • Supported instruction sets.
  • Cache information.
Mainboard
  • Vendor, model and revision.
  • BIOS model and date.
  • Chipset (northbridge and southbridge) and sensor.
  • Graphic interface.
Memory
  • Frequency and timings.
  • Module(s) specification using SPD (Serial Presence Detect) : vendor, serial number, timings table.
System
  • Windows and DirectX version.
My System SpecsSystem Spec
09 Jun 2010   #15
amoretam

Windows 7 x64bit Home Premium
 
 

Hey , i have changed ram sticks order in memory slots and I successfully logged in.
Before that i tried booting up with just one stick changed to another slot but nothing, then I placed another stick and nothing, then I summed the other two sticks and Voila, here I am writing from my problematic computer.
I will not turn it off until i am done with your suggestions.
I will also try to flash the BIOS since I've never done that and my motherboard's website have a BIOS update published.

So the question that is left is: Is this a memory issue or graphic card issue?
Also, and think you should know that before, when this happened for the first time, I reseated the CMOS battery but I've never configured my BIOS after that. Everything is at the default values.
Would this be that I have to change something in the BIOS?

I have my computer case open right now and when I touch the video card i feel that is kind of hot, how could I know how hot is too hot?

Thanks a lot you all, hanging in there!

Quote   Quote: Originally Posted by Night Hawk View Post
PC Wizard will have all that plus a little more included in that program.
My System SpecsSystem Spec
09 Jun 2010   #16
ryo

 
 

Quote   Quote: Originally Posted by amoretam View Post
Hey , i have changed ram sticks order in memory slots and I successfully logged in.
Before that i tried booting up with just one stick changed to another slot but nothing, then I placed another stick and nothing, then I summed the other two sticks and Voila, here I am writing from my problematic computer.
I will not turn it off until i am done with your suggestions.
I will also try to flash the BIOS since I've never done that and my motherboard's website have a BIOS update published.

So the question that is left is: Is this a memory issue or graphic card issue?
Also, and think you should know that before, when this happened for the first time, I reseated the CMOS battery but I've never configured my BIOS after that. Everything is at the default values.
Would this be that I have to change something in the BIOS?

I have my computer case open right now and when I touch the video card i feel that is kind of hot, how could I know how hot is too hot?

Thanks a lot you all, hanging in there!

Quote   Quote: Originally Posted by Night Hawk View Post
PC Wizard will have all that plus a little more included in that program.
sometime that's cause a memory sticks but i'm not sure too, it's can many possible on it, can be graphics card and also temperature of CPU.
My System SpecsSystem Spec
09 Jun 2010   #17
amoretam

Windows 7 x64bit Home Premium
 
 
ok

This is to let you all know that i downloaded pc wizard 1.94 and GPU-Z.0.4.3.
Now what??
My System SpecsSystem Spec
09 Jun 2010   #18
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

I never rush at flashing the bios unless there's a problem that needs to be fixed or a newer version will enable support for something. The screen here will show how PC Wizard displays both cpu and video card temps all in one window making it a good one to have.

The beep code heard is stricly hardware not software in every case. The single long beep followed by two short beeps in many bioses points at the video card itself. But that is also depends on what bios the board there has there as well while a temp problem likely from what you are describing.

One example where that particular points to something is seen with the AST Research bios: one long, two shortDMA page register test failed (POST 18)

That is the list of various bios codes seen at BIOS Beep Codes

Bios Central and other sites also have charts to lookover once you know which one you have.


Attached Images
SFC scannow cannot repair problem..-check-temps.jpg 
My System SpecsSystem Spec
09 Jun 2010   #19
amoretam

Windows 7 x64bit Home Premium
 
 
ok

ok, here I've attached the pc wizard Voltage, Temperature and Fans log file.

I wonder what is normal and what is extreme,? sorry for my ignorance, but I don't know how to measure that..

Could you please check if there is something wrong ?

Thanks a lot


Attached Files
File Type: txt pc wizard Voltage, tempereature and Fans.TXT (1.2 KB, 5 views)
My System SpecsSystem Spec
10 Jun 2010   #20
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

That may be slightly warm but still within the normal temp range. It also depends on what you were doing when the screen went black on you like running a game or something else that would place a good load on the card which then heated up further.

The cpu temp was great and not any worry there on that. Now you have to find out which bios is used on that make and model board however in order to look up the actual definition for the 1 long 2 short while I suspect the card itself may be the card on the way without actually seeing temps high enough to overheat since most of this is being seen at startup.
My System SpecsSystem Spec
Reply

 SFC scannow cannot repair problem..




Thread Tools




Similar help and support threads
Thread Forum
SFC /Scannow Cannot Repair Errors
Being new to this forum, excuse any incorrect requests... Anyway, I have a Lenovo PC that started having very long boot up time (greater than 12 minutes). Have checked everything possible, no Malware found, viruses, Trojans and so on. Tried all that I know to try and fix problem with no luck...
Performance & Maintenance
Need help Re:sfc /scannow cannot repair shellbrd.dll
Hello 7 gurus I'm a n00b that needs help regarding these entries in SFC log: I recently "fooled around" with changing the OEM Information on System properties page in W7 HomePrem SP1 x64 using instrux from this guide (and others floating around the Netz) and decided to change everything back to...
Performance & Maintenance
sfc /scannow cannot repair explorer.exe
Hi everyone, I am having problems using sfc /scannow in my elevated command prompt, as it reported that errors are found but cannot be fixed, in my CBS.log. I searched "cannot repair" in my CBS.log, and it reported error with my explorer.exe. I edited it before when using custom theme...
Performance & Maintenance
SFC /scannow can't repair autochk.exe
I just found out I can't schedule a chkdsk scan, even after scheduling it the scan will not run when the computer reboots. I used the sfc scannow option and the results said something like "windows resource protection found integrity violations" with autochk.exe I attach my sfcdetails.txt file ...
Performance & Maintenance
SFC scannow cannot repair autochk.exe
Hi I have Window Seven family on my laptop It goes quite well. but doing some maintenance, I noticed that SFC scannow detected a problem. From the log (sfc detail below) it seems to me that it is autotchk.exe is corrupted, both in Windows and in Windows backup store. I can however do a...
Performance & Maintenance
sfc scannow can't repair files
Hi guys. I was having problems with my wallpaper (couldn't change it) after fresh instalation of windows and I found a solution on somewhere on the interent. (I had to delate one file). But they also said I could do scannow using cmd.exe. So I did it. in CBS..log i found sth like this: ...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:51.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App