Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC scannow cannot repair problem..

10 Jun 2010   #21
amoretam

Windows 7 x64bit Home Premium
 
 

The screen never went black on me.
This just happens when i turn off the computer and try to boot up again.
My MOBO uses a slightly modified version of the American Megatrends AMIBIOS. When I looked in BIOS central it says that 1 long and two short beeps mean: An error was encountered in the video BIOS ROM, or a horizontal retrace failure has been encountered.

But when i looked in the AMIBIOS8 Checkpoint and Beep Code List PUB.pdf
i found no such code listed.



Quote   Quote: Originally Posted by Night Hawk View Post
That may be slightly warm but still within the normal temp range. It also depends on what you were doing when the screen went black on you like running a game or something else that would place a good load on the card which then heated up further.

The cpu temp was great and not any worry there on that. Now you have to find out which bios is used on that make and model board however in order to look up the actual definition for the 1 long 2 short while I suspect the card itself may be the card on the way without actually seeing temps high enough to overheat since most of this is being seen at startup.



My System SpecsSystem Spec
.
10 Jun 2010   #22
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

For 1 long 3 short if that is what you should be hearing that would be "
Reseat the memory, or replace with known good modules.
" according to the AMI Ameritrends pdf guide seen at http://www.ami.com/support/doc/AMIBI...e_List_PUB.pdf

There are only three codes listed way at the bottom of that one in section #8.2.1 which amounts to page #15. AMI typically doesn't see as many as seen with other bios versions. At least you won't have to worry about cooking anything and you already reseated the memory when moving dimms around.
My System SpecsSystem Spec
10 Jun 2010   #23
amoretam

Windows 7 x64bit Home Premium
 
 

This thread is on pause due to system reparation by technician....
I'll give you all an update when done..
Thanks
My System SpecsSystem Spec
.

10 Jun 2010   #24
ryo

 
 

Quote   Quote: Originally Posted by amoretam View Post
This thread is on pause due to system reparation by technician....
I'll give you all an update when done..
Thanks
thanks for the update and information that's you give.
My System SpecsSystem Spec
Reply

 SFC scannow cannot repair problem..




Thread Tools




Similar help and support threads
Thread Forum
Can't do in place repair, scannow doesn't fix problem.
I'm having a massive amount of problems with Windows 7 Ultimate. I figured the only thing to do was an in place repair. But the CD won't run. I can get it to the start window, then it just hangs and will for hours until I start my computer. I've tried scannow, but it says it couldn't fix all...
Performance & Maintenance
SFC /Scannow Cannot Repair Errors
Being new to this forum, excuse any incorrect requests... Anyway, I have a Lenovo PC that started having very long boot up time (greater than 12 minutes). Have checked everything possible, no Malware found, viruses, Trojans and so on. Tried all that I know to try and fix problem with no luck...
Performance & Maintenance
Need help Re:sfc /scannow cannot repair shellbrd.dll
Hello 7 gurus I'm a n00b that needs help regarding these entries in SFC log: I recently "fooled around" with changing the OEM Information on System properties page in W7 HomePrem SP1 x64 using instrux from this guide (and others floating around the Netz) and decided to change everything back to...
Performance & Maintenance
SFC /scannow can't repair autochk.exe
I just found out I can't schedule a chkdsk scan, even after scheduling it the scan will not run when the computer reboots. I used the sfc scannow option and the results said something like "windows resource protection found integrity violations" with autochk.exe I attach my sfcdetails.txt file ...
Performance & Maintenance
SFC /scannow cannot repair catsrvut.dll
Howdy, I have Win7x64Ulti -Dell OEM I auto installed Sp1 in a moment of weakness (gave in to the pain of Win7). I have problems with some programs around com+ and VSS, notably Casper, but others as well so I ran sfc /scannow. Only one file shows up as a problem and Win says "cannot...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:29.
Twitter Facebook Google+