Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Convert to XviD

02 Sep 2010   #1

Windows 7 Home Premium 64bit, 6.1 build (7600)
Convert to XviD

Right, here goes,
I bought a surround sound system with DVD upscaler and the unit/upscaler has a USB slot and the instructions say flash drive.
I want to use my Hard drive in it but I don't know if it works. Here's the two drives I have:

Freecom, 2.5" SATA, 160GB, NTFS, USB powered
Toshiba, 3.5" SATA, 500GB, FAT32, Mains powered

I tried the freecom but it wasnt recognised, the Toshiba is recognised but I have an issue, It says in the manual it can playback XviD files, nothing else.
Im using DVDVideoSoft and DVDFAB8, Ive converted the 2 odd hour long video numerous times taking over 3 hours from disc to file each time. Tried it in different ways with each programme and the player still won't play the file.
With DVDFAB I set the conversion to "generic" which apparently includes XviD format, didnt work, Tried MP4 (supports DivX, XviD) using DVDVideoSoft and still no luck, tried a different sub option in DVDFAB and still no luck, Converted a 700MB AVI clip to save time and tried it in both my Toshiba drive and a flash drive incase it was the player being incapable of playing off a HDD. NO LUCK WHAT-SO-EVER!!!

Any body know any software that will give me a file in XviD extension format, Not MKV or FLV or AVI or anything. Its really annoying me now

My System SpecsSystem Spec
02 Sep 2010   #2

Windows 7 32 bit

For DVD to avi I would try AutoGK. If you set the quality percentage high it does a very good job in 1 pass. Also it autocrops so those "letterboxed" DVDs usually come out as 16x9 avi. It uses xvid. For just about anything else try Quick AVI Creator.

You can download both from - Forum, Guides, Tools and hardware lists

edit: btw Quick AVI Creator uses xvid_encraw. If you look at the xvid.presets file it's obvious how to add your own One Pass Mode if 2 pass seems too slow. I found the results fine provided you give it sufficient bit rate. The program tends to set the bit rate way too low. For a DVD with 90 minute to 2 hour movie, you should use about 2000 for standard def. In AutoGK as I mentioned, just set the quality to about 92%.

edit2: With Quick AVI Creator, after it demuxes and processes the audio, it will pop up AvsP editor so you can add AviSynth filters. If you don't need to add subtitles or anything just go into Tools menu and select Process the Video. Then select your pass mode from the drop-down and bump up the bit rate setting. Hit the Go button and wait 2 hours. :)
My System SpecsSystem Spec
03 Sep 2010   #3

Windows 7

go for these softwares dude.. i use them....

1. Xilisoft video Converter
2. Easy Converter
3. Xvid Converter (it has all formats)
My System SpecsSystem Spec

03 Sep 2010   #4

Windows 7 Home Premium 64bit, 6.1 build (7600)

Thanx for your help guys, havent quite gotten round to trying ut yet but ive read the manual over again and it says it plays back MPEG-4 so i guess I need MPEG-4 format on XviD codec.
Can you verify exactly which freeware will give me exactly that?

Pre-emptive thank you
My System SpecsSystem Spec
03 Sep 2010   #5

Windows 7 Pro

My System SpecsSystem Spec

 Convert to XviD

Thread Tools

Similar help and support threads
Thread Forum
xvid codec
Morning i have downloaded a film but cant' play it. when i try it says. xvid video codec maybe required to view video. i have googled this and been sent to website downloads followed the instructions . but i still cant' play it. any suggestions. please.
Music, Pictures & Video
Xvid-1.3.4-20150621.exe Safe?
Have you come upon a video file compressed into .xz (Xvid)? After a very bad experience d/loading what appeared to be the right codec I'm very hesitant to open Xvid-1.3.4-20150621.exe Source: Xvid - Download So I'd really like to find out if this executable is safe before opening it. ...
Xvid to Quicktime
I am tying to convert a couple of xvid files to quick time, and would like to know if anyone knows a free converter program. Thanks jack
Media Center
WMP freezes playing Xvid avi
I am on win7 x64 7600 RTM playing Xvid /avi movies WMP freezes for few mins then after 5-7 mins again start playing normally, assuming it could be codec problem I installed Klite along with media player classic, but even that does not work . What is the source of the problem? I tried KMplayer...
Music, Pictures & Video
Can not Play some xvid (avi) files
I am having a problem playing a number of xvid encoded .avi files. about 16 to 20 minutes into the video I get a message saying "Cannot Play video -windows media center can not open the file" This happens on 7229x64 and 7264x64. It also fails at the same point in WMP (both the x86 and x64...
Media Center

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:02.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App