Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Compatibility Mode Problem

28 Feb 2011   #1
Robert11

Windows 7 64bit
 
 
Compatibility Mode Problem

Hello,

Have downloaded a quite old program that was originally written for W95.

Tried running it in compatibility mode, and even though one of the choices is supposedly compatibility for W95, it won't.

Shouldn't it ?

Any other suggestions for running it in W7, or just probably too old ?

Some of the err msg was:
this version of the file is not compatible with the version of windows you are running...
...whether you need an x86 (32 bit vers)...

Thanks,
Bob


My System SpecsSystem Spec
.
28 Feb 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Robert11 View Post
Hello,

Have downloaded a quite old program that was originally written for W95.

Tried running it in compatibility mode, and even though one of the choices is supposedly compatibility for W95, it won't.

Shouldn't it ?

Any other suggestions for running it in W7, or just probably too old ?

Some of the err msg was:
this version of the file is not compatible with the version of windows you are running...
...whether you need an x86 (32 bit vers)...

Thanks,
Bob
We could use your system specs so we know what hardware you have.
My System SpecsSystem Spec
28 Feb 2011   #3
Darician

Windows 7 Ultimate x64 SP1
 
 

What program is it? What version of Windows 7 are you running (32-bit or 64-bit)? Additionally, do you know if it is a 16-bit program? The reason I ask is because of the nature of the error message, which is usually received when someone attempts to run a 16-bit program under 64-bit Windows, which simply will not work. You can verify this by going to the Start Menu and right-clicking on "Computer" then clicking on "Properties" and you will find if it is 32-bit or 64-bit.
My System SpecsSystem Spec
.

28 Feb 2011   #4
Robert11

Windows 7 64bit
 
 
From OP

Hi,

Yes, I'm running a 64 bit OS.

Any way to have it run this program (only ?) as 32 bit without messing everything else up ?

Thanks for help,
Bob
My System SpecsSystem Spec
28 Feb 2011   #5
Darician

Windows 7 Ultimate x64 SP1
 
 

If it's a 16-bit program, then there is simply no way to accomplish it within a 64-bit Windows OS. You would have to run XP Mode or some other virtual instance of a 32-bit Windows OS to be able to run this program or a 32-bit version of Windows 7.

If it's a 32-bit program (doesn't seem like it) and doesn't have a 64-bit version, generally it would run and if not, it would get a different type of error than what you're experiencing. Is this a common old program? What program is it?
My System SpecsSystem Spec
Reply

 Compatibility Mode Problem




Thread Tools




Similar help and support threads
Thread Forum
Compatibility Mode causing problems, How to remove this mode?
Our old computer (A Windows XP) went kepoot and my father tried installing a windows XP Quicken onto this Windows 7 computer, but it seems in his failed installation he enabled a Compatibility Mode, since I have noticed these things different with the computer: Local Disc C: Program Files are no...
Software
windows 7 startup problem in sata compatibility mode
i bought a new laptop toshiba satellite c850..no os was installed in it.i got installed windows 7.but later when i tried to install windows 8,i was unable to install it.then i checked the user manual which came along with the laptop.it said i did as it is said...but windows 8 is not...
Installation & Setup
Windows 7: iTunes compatibility mode problem
http://i36.tinypic.com/f4myhf.png "iTunes.exe has been set to run in compatibility mode for an older version of Windows. For best results, turn off compatibility mode for iTunes before you open it. " However, iTunes is not checked to run in compatibility mode I checked. ...
Software
COMPATIbility MODE !!!!!!
Hi, the problem is following.... I had Office 2007, that Installed parallel 2010 and yesterday removed 2007, but 2010 is still opening in compatibility mode but I am not opening files but new documents but still compatibility mode. What can I do ? PLS help me
Microsoft Office
Does Windows XP Mode = Compatibility Mode?
Hi all! I've heard that Windows 7 Home Premium doesn't include the "Windows XP Mode" and I'm told on the MS's website that it's a separate download, with an image showing totally XP-themed window in the 7 environment. Windows 7 Features: Windows XP Mode I'm running Ultimate and I recall no...
Virtualization


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:52.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App