CHKDSK taking forever on 60 GB HDD.

Page 1 of 2 12 LastLast

  1. Posts : 387
    Win 7 & 10 x64
       #1

    CHKDSK taking forever on 60 GB HDD.


    i'm checking for errors on my secondary HDD and it's been stuck around the same spot for like forever (it's like 3 hrs into the error checking). B4 checking for errors, I already know that the HDD has a SMART event. If CHKDSK is taking forever, does it also mean that my HDD is gonna fail?

    EDIT: finally it's done after like 4 hrs.
    Last edited by imeem; 09 Feb 2012 at 21:52.
      My Computer


  2. Posts : 1,167
    Windows 7 Pro with SP1 32bit
       #2

    How many gigabytes of data was there to check. My external Hard Disk has 248 gigs of data and it took 114 seconds to finish running Check Disk. In the end I got the following message.

    CHKDSK taking forever on 60 GB HDD.-check-disk-dialog-box.jpg

    4 hours seems a lot on the high side and needs to be further investigated.
      My Computer


  3. Posts : 166
    Windows
       #3

    imeem said:
    If CHKDSK is taking forever, does it also mean that my HDD is gonna fail?

    If chkdsk is taking forever, it's usually because your disk has a lot of errors which check disk is trying to correct or read from. Let it run. Check the logs to see what the scan found. Sometimes you can get away with a few bad blocks, other times it's a sign of impending doom. If you keep using the drive, make sure you back up religiously!
      My Computer


  4. Posts : 387
    Win 7 & 10 x64
    Thread Starter
       #4

    wanchoo said:
    How many gigabytes of data was there to check. My external Hard Disk has 248 gigs of data and it took 114 seconds to finish running Check Disk. In the end I got the following message.

    CHKDSK taking forever on 60 GB HDD.-check-disk-dialog-box.jpg

    4 hours seems a lot on the high side and needs to be further investigated.
    I only have 16 GB of data on the 60 GB HDD.


    Fred Garvin said:
    imeem said:
    If CHKDSK is taking forever, does it also mean that my HDD is gonna fail?

    If chkdsk is taking forever, it's usually because your disk has a lot of errors which check disk is trying to correct or read from. Let it run. Check the logs to see what the scan found. Sometimes you can get away with a few bad blocks, other times it's a sign of impending doom. If you keep using the drive, make sure you back up religiously!

    This was what i got:

    Chkdsk was executed in read/write mode.

    Checking file system on D:
    Volume label is Software.

    CHKDSK is verifying files (stage 1 of 5)...
    6400 file records processed. File verification completed.
    4 large file records processed. 0 bad file records processed. 0 EA records processed. 0 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)...
    7246 index entries processed. Index verification completed.


    CHKDSK is verifying security descriptors (stage 3 of 5)...
    6400 file SDs/SIDs processed. Security descriptor verification completed.
    424 data files processed. CHKDSK is verifying Usn Journal...
    12792072 USN bytes processed. Usn Journal verification completed.
    CHKDSK is verifying file data (stage 4 of 5)...
    6384 files processed. File data verification completed.
    CHKDSK is verifying free space (stage 5 of 5)...
    10471669 free clusters processed. Free space verification is complete.
    Adding 6524 bad clusters to the Bad Clusters File.
    Correcting errors in the master file table's (MFT) BITMAP attribute.
    Correcting errors in the Volume Bitmap.
    Windows has made corrections to the file system.

    58602495 KB total disk space.
    16625820 KB in 5885 files.
    3056 KB in 425 indexes.
    86943 KB in use by the system.
    65536 KB occupied by the log file.
    41860580 KB available on disk.

    4096 bytes in each allocation unit.
    14650623 total allocation units on disk.
    10465145 allocation units available on disk.
      My Computer


  5. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #5

    Hi,

    You need to run chkdsk /R which will mark bad sectors so that data won't be written to these bad sectors in future.

    Please run that, and let us know how you went with that.

    Regards,
    Golden
      My Computer


  6. Posts : 1,167
    Windows 7 Pro with SP1 32bit
       #6

    There are too many bad sectors on the hard disk. I think it would be wiser to save all the data that you can and replace this disk with a new one.
      My Computer


  7. Posts : 166
    Windows
       #7

    wanchoo said:
    There are too many bad sectors on the hard disk. I think it would be wiser to save all the data that you can and replace this disk with a new one.
    + 1
      My Computer


  8. Posts : 983
    10 x64 | 7 x64
       #8

    Fire up HD-Tune and run a check. If you see red, they are dead.
      My Computer


  9. Posts : 387
    Win 7 & 10 x64
    Thread Starter
       #9

    Golden said:
    Hi,

    You need to run chkdsk /R which will mark bad sectors so that data won't be written to these bad sectors in future.

    Please run that, and let us know how you went with that.

    Regards,
    Golden
    nothing pops up when I run it.
      My Computer


  10. Posts : 25,847
    Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
       #10

    How old is that 60 gig hard drive?
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 23:48.
Find Us