Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Unable to activate foot pedal in ChartScript

08 Mar 2012   #1
wjkboozer

Win 7 Professional 64 bit
 
 
Unable to activate foot pedal in ChartScript

I am running Win 7 Profession x 64 on an HP Pavilion HPE (brand new).

I use ChartScript.net for my job doing medical transcription. On my old XP PC running IE 6 I had no problems at all with the site or setup. Because this site is reported to be incompatible with any IE above 6, I have installed Avant browser which reports to be compatible with IE 6. I was able to completely setup the access and usage of the site normally except for setting up the foot pedal, an IN-USB2. I get the following error:

"An error has occurred configuring foot pedals: Active X component cannot create object."

I have already tried using XP Mode and it will not recognize the pedal either. It flat won't find it at all even using the USB attach function.

The pedal is showing in Devices and Printers as Unspecified: VEC USB foot pedal. Changing USB ports has no effect.

I am enclosing a screen shot as well.

Needless to say I am extremely frustrated and need to be using this new PC and not the 8 year-old worn out one.

Thank you in advance for any help and suggestions.




Attached Thumbnails
Unable to activate foot pedal in ChartScript-cs.png  
My System SpecsSystem Spec
.
13 Mar 2012   #2
wjkboozer

Win 7 Professional 64 bit
 
 

I finally found the answer to the above problem on a different forum.

Download and install Oracle VM Virtual Box and install a minimal version of XP. Now open IE 6 within the VB and run ChartScript. The system will now accept the foot pedal and install normally.

https://www.virtualbox.org/

Windows 7 cannot redirect HID devices into XP Mode therefore that pedal is seen by Win 7 but not the XP mode. VB can redirect these devices and/or capture them for use within the VB environment.

I hope this helps someone else if they come looking help to this problem.
My System SpecsSystem Spec
Reply

 Unable to activate foot pedal in ChartScript




Thread Tools




Similar help and support threads
Thread Forum
Unable to Activate Windows 7 Pro Upgrade from XP
I'm trying to upgrade a friend's Lenovo R61i notebook computer from XP to Windows 7 (see full specs in my profile). I've managed to get everything installed (much more painful than I expected). Now, however, when I try to activate the system, I receive a "The product key you have entered does...
Windows Updates & Activation
USB cable extension length 15 foot plus 1.5 foot to a powered hub
Maximum length for usb 2.0 is 5 meters. = 16.4 feet If I get a usb 2.0 extension cable of 15 feet and plug in this 3.0 powered hub with its supplied 1.5 foot cable, will it fail to work? Scheme is PC to 15 foot extension cable to 1.5 foot cable to hub. Black 7 Port USB 3 0 Hub on Off...
Hardware & Devices
Unable to activate windows. OEM key
Hello, I've been trying to activate my laptop for sometime now. I had to reinstall windows 7 home premium 64 bit a few weeks back and it will not take my key on the coa sticker. No anti-virus is running on this machine as of yet. Diagnostic Report (1.9.0027.0):...
Windows Updates & Activation
Unable to activate Windows 8.1 Pro x64
Hello, I purchased a Lenovo y510p which came installed with Windows 8.1 (not pro). Later I decided to upgrade to Windows 8.1 pro but at that time I didn't activated it. So, right now an "activate windows" mark is coming on lower down side. So firstly, I quickly bought a genuine windows 8.1 pro...
Windows Updates & Activation
Windows Firewall Service unable to activate, SFC scan unable to work
Well I got a big problem. A couple days ago I noticed network connectivity issues. Random connection drops, overall bad connection, etc. I recently had some really bad malware and I removed it, so I suspected leftover malware from the start. I went to check Windows Update to see if I missed a...
System Security


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:59.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App