Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Errors installing Microsoft Visual C++

19 Jan 2010   #1
civint

Windows 7 Professional (build 7600)
 
 
Errors installing Microsoft Visual C++

When I tried to install my camera's image transfer software, (a Nikon D5000) it came up with an error reporting
Code:
 Error 1935.An error occurred during the installation of assembly
'Microsoft.VC80.OpenMP,type="win32",version="8.0.50727.762",publicKeyToken="1fc8b3b9a18e3b",processorArchitechture="x86"'.
please refer to Help and Support for more information
while it was trying to install Microsoft Visual C++ 2005 redistributable as part of Nikon Transfer 1.5.0 downloaded from their website, although the same error occurred with the CD which was distributed with the camera.

I googled the error, and it came up with possible RAM failure, which I checked, and no errors were reported by the software (memtest), I then tried to install Microsoft Visual C++ 2008 which reported the same error and returned another error message:

Code:
HRESULT: 0x80070246
which was attached to the bottom of the previous message.

I googled them both and turned up nothing,
any help would be much appreciated.

Thanks
Civ


My System SpecsSystem Spec
.
22 Jan 2010   #2
civint

Windows 7 Professional (build 7600)
 
 

OK, so I googled around a bit more with limited to no success. However, on installing some new PC software for my phone, I ran into a similar, but different issue.
The software was the Nokia OVI suite 2, and the error it turned up was as follows:

Code:
Microsoft.VC90.MCF,version="9.0.3.30729.4148",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitechture="x86",type="win32".
Again, any help is much appreciated. If windows can't install it's own apps I'm going to go back to linux :P

Civ
My System SpecsSystem Spec
22 Jan 2010   #3
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hi, Welcome to SF,

Error 1935 most refer to assembly error or cache settings etc. I guess the best thing would be to completely remove the Microsoft VC++ using REVO Uninstaller then reboot then reinstall the VC++ then install your program.

Hope this helps,
Captain
My System SpecsSystem Spec
.

23 Jan 2010   #4
civint

Windows 7 Professional (build 7600)
 
 

I can't remove it! I installed the application suggested, and it doesn't show up as an installed programme .

I attempted to reinstall it and got the familiar error message, but no luck was had, it is not installed, it would seem. Any suggestions?
My System SpecsSystem Spec
24 Jan 2010   #5
pweegar

Windows 7 Ultimate 64bit
 
 

Quote   Quote: Originally Posted by civint View Post
I can't remove it! I installed the application suggested, and it doesn't show up as an installed programme .

I attempted to reinstall it and got the familiar error message, but no luck was had, it is not installed, it would seem. Any suggestions?
How did you attempt to uninstall the program(s)??? Did you go thru programs/features of the control panel or does the program have an uninstaller? If you can, try to remove it thru the control panel. IF/WHEN you get it uninstalled, make sure all the updates have been installed.

IF you feel comfortable editing the system registry, you can manually delete entries, but this in no way says you'll get them all.

What version of the .Net framework do you have installed? (To find out, go to the control panel, program features. It should be listed here). Please, also look in the event viewer, application log and note any errors and/or warnings.

This link may or may not be of help: http://support.microsoft.com/kb/839547
Also: http://blogs.msdn.com/astebner/archi...10/255346.aspx

It appears, from what I see in google that it MAY be a .net framework problem. Take a look at the links I provided. They both give instructions as to how to fix the problem.
My System SpecsSystem Spec
24 Jan 2010   #6
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Quote   Quote: Originally Posted by pweegar View Post
Quote   Quote: Originally Posted by civint View Post
I can't remove it! I installed the application suggested, and it doesn't show up as an installed programme .

I attempted to reinstall it and got the familiar error message, but no luck was had, it is not installed, it would seem. Any suggestions?
How did you attempt to uninstall the program(s)??? Did you go thru programs/features of the control panel or does the program have an uninstaller? If you can, try to remove it thru the control panel. IF/WHEN you get it uninstalled, make sure all the updates have been installed.

IF you feel comfortable editing the system registry, you can manually delete entries, but this in no way says you'll get them all.

What version of the .Net framework do you have installed? (To find out, go to the control panel, program features. It should be listed here). Please, also look in the event viewer, application log and note any errors and/or warnings.

This link may or may not be of help: You may receive an "Error 1935" error message when you use the Netfx.msi Windows Installer package to install the .NET Framework 1.1
Also: Aaron Stebner's WebLog : Troubleshooting 1935 and 2908 errors during installation

It appears, from what I see in google that it MAY be a .net framework problem. Take a look at the links I provided. They both give instructions as to how to fix the problem.
It might has to do something with .NET but the problem is .NET Frameworks up to 3.5 is inbuild in Windows 7 so the two thing we can do would be to

Run System File Checker

Start > Run > CMD > Right Click and Run as administrator > SFC/ SCANNOW

OR

Repair Install
My System SpecsSystem Spec
24 Jan 2010   #7
civint

Windows 7 Professional (build 7600)
 
 

I tried running SFC /SCANNOW but it only returns the following

"Windows Resource Protection could not perform the requested operation"

and, looking at my installed applications, I couldn't see any .NET entries.
I'm stumped, and I don't really want to have to do a sytem repair
My System SpecsSystem Spec
24 Jan 2010   #8
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Quote   Quote: Originally Posted by civint View Post
I tried running SFC /SCANNOW but it only returns the following

"Windows Resource Protection could not perform the requested operation"

and, looking at my installed applications, I couldn't see any .NET entries.
I'm stumped, and I don't really want to have to do a sytem repair
You couldn't find it there because it a OS Component.
My System SpecsSystem Spec
25 Jan 2010   #9
civint

Windows 7 Professional (build 7600)
 
 

ok, well looking at it, it seems that an OS repair is all thats left to try, really. Are there any risks of data loss doing this? Should I get ready to reinstall all my apps etc?
My System SpecsSystem Spec
Reply

 Errors installing Microsoft Visual C++




Thread Tools




Similar help and support threads
Thread Forum
Problem installing Microsoft Visual Studios Express
Hello, I am trying to install microsoft visual studios express on my Toshiba laptop running on Windows 7 Home Premium x64, but when I download the installer and start it, I only see the visual express logo and then no screen appears (the program is running and I can even click things, as in, my...
Software
Error 1935 HRESULT: 0x80070003 when installing Microsoft Visual 2008
Hello, I was trying to install XNA 3.1 when I started receiving some VC90 errors. I uninstalled Microsoft Visual C++ 2008 32 and 64, but receive an error when reinstalling. Error 1935 HRESULT: 0x80070003. I ran SFC /SCANNOW. CBS came back OK. I ran the readiness tool. CheckSUR says I'm fine....
Performance & Maintenance
Microsoft Visual Studio 2010 SP1 Problems installing
Hey guys, I am currently a student in college for computer networking & tech support, the college provides us the licence and all the software for our courses. Although my computer says the SP1 for Visual Studio 2010 Ultimate is ready for install but when I try to install it. It gets half way...
Software
Microsoft Visual C++
This is out of my area of knowledge. Do I need all these Microsoft Visual C++'s installed? Thanks!
Performance & Maintenance
microsoft visual c++
i have a least 8 copies of this on my win7 64bit,anyone know how many your supposed to have?seems a bit of overkill,thanks to all.
Software
Microsoft Visual C++
Everytime i install Microsoft Visual C++ (attachment A) All the files go to my F:\ (attachment B) Why? Any ideas?
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 12:35.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App