Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: defaults to 2 channel Sound 5.1 works if manually set

23 Jun 2009   #1

Windows 7 RC x64
defaults to 2 channel Sound 5.1 works if manually set

windows 7 defaults to 2 channel Sound 5.1 works if manually set in video playback programme

Realtek HD Audio Driver 2.26

anyone got any ideas to fix this

cpu i7 920 @ 3.74
cpu cooler Akasa NERO
motherboard GA-EX58-UD5
ram 6GB DDR3 1333 Mhz
gpu GTX 275
case Antec Nine Hundred

My System SpecsSystem Spec
23 Jun 2009   #2

Windows 7

what video playback program are you using?
My System SpecsSystem Spec
23 Jun 2009   #3

Windows 7 RC x64

media player classic
PowerDVD 9 and 8


updated to 2.27 and still got the problem
My System SpecsSystem Spec


 defaults to 2 channel Sound 5.1 works if manually set

Thread Tools

Similar help and support threads
Thread Forum
Sound Breaks Up When Recording One Channel
I recently installed two HD HomeRun Dual TV tuners that connect to my Wi-Fi router and use WMC to record programs and watch them later. It works well on all channels except one. I can receive that channel just fine directly on my TV (the same antenna feeds the tuners and the TV) and I can watch...
Media Center
Sound missing R channel
So here’s a tricky one. The sound on my Windows 7 HP PC began acting up. I seem to only get sound from R channel..when they’re properly connected. I have two brand new Bose speakers set up on my desktop, and the one on the right has four plug ports: Power / Aux/ Connect to computer / Connect to...
Sound & Audio
Sound disappears when changing TV-channel
Hi, I just built a new computer and everything works smooth and fine apart from MC. I have Asus My Cinema P7131 TVtuner PCI-card and have use it without problems before on Win7 Ultimate with the native windows drivers (this card is supported directly by wiondows and does not need drivers like XP...
Media Center
Dolby Bluray sound able to convert to 2 channel
Hi All, I've done a bit of research but can't find a specific fix for this. I'm running sound from the mobo by spdif to a 2 channel dac, then analogue into my amp (which is 2 channel). I listen to stero mostly, and don't want surround sound. I get the sound issue when i'm unable to select...
Sound & Audio
System restore works only manually
I googled everywhere and nothing helped. So I decided to ask you. My system restore is on and have 3.5gb (3%) of space, but it wont make automatic restores, only if I make them manualy. I tried with restarting system restore, turned off and on again, tried with Av turned of.... ...
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 16:49.
Twitter Facebook