Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Scrambled Noise At Higher Frequencies

10 Apr 2011   #11
BlackMaterial

Windows 7 Professional 64 Bit
 
 

Alright, that sound fine.

But I am a tad bit afraid I might press a wrong button in there.

Where do I find the 'Enable/Disable' switch in the BIOS?
Is there a:
Standard CMOS Features -> Sound -> etc.?
guide?

Kind regards,
BlackMaterial


My System SpecsSystem Spec
.
10 Apr 2011   #12
Mike Connor

Several, including Windows 7 x64 Ultimate
 
 

Quote   Quote: Originally Posted by BlackMaterial View Post
Alright, that sound fine.

But I am a tad bit afraid I might press a wrong button in there.

Where do I find the 'Enable/Disable' switch in the BIOS?
Is there a:
Standard CMOS Features -> Sound -> etc.?
guide?

Kind regards,
BlackMaterial
You could read the manual which came with your machine, everything is explained there.

There are also various beginner's guides on the net, Like these;

BIOS for Beginners : Introduction

http://www.educypedia.be/computer/motherboardbios.htm

Once you are in the BIOS, there are also short guides which tell you what to do and how to do it.

If you are afraid to use it, then you will be unable to solve your problem.

Regards....Mike Connor
My System SpecsSystem Spec
10 Apr 2011   #13
neo101

WIN7 Ultimate 64bit
 
 

Get yerself a small notebook as a 'puter logbook and write down

date
+ problem
+ what you changed
+ how you did it
My System SpecsSystem Spec
.

10 Apr 2011   #14
BlackMaterial

Windows 7 Professional 64 Bit
 
 

Quote   Quote: Originally Posted by Mike Connor View Post
Quote   Quote: Originally Posted by BlackMaterial View Post
Alright, that sound fine.

But I am a tad bit afraid I might press a wrong button in there.

Where do I find the 'Enable/Disable' switch in the BIOS?
Is there a:
Standard CMOS Features -> Sound -> etc.?
guide?

Kind regards,
BlackMaterial
You could read the manual which came with your machine, everything is explained there.

There are also various beginner's guides on the net, Like these;

BIOS for Beginners : Introduction

BIOS settings, BIOS beep codes

Once you are in the BIOS, there are also short guides which tell you what to do and how to do it.

If you are afraid to use it, then you will be unable to solve your problem.

Regards....Mike Connor

I decided to just do it
I went into my bios, had to search a bit, but I found it.
I disabled it, saved and reset.

However, The problem still excists.
It's a weird problem to describe.
Let's say a tone, (example; a guitar)
Has to be right in the middle, but instead of producing a middle-tone, it produces a mixture of low and high tones.

Really hard to describe.

I hope I can solve this problem any time soon.

Regards,
BlackMaterial.
My System SpecsSystem Spec
10 Apr 2011   #15
Mike Connor

Several, including Windows 7 x64 Ultimate
 
 

Quote   Quote: Originally Posted by BlackMaterial View Post


I decided to just do it
I went into my bios, had to search a bit, but I found it.
I disabled it, saved and reset.

However, The problem still excists.
It's a weird problem to describe.
Let's say a tone, (example; a guitar)
Has to be right in the middle, but instead of producing a middle-tone, it produces a mixture of low and high tones.

Really hard to describe.

I hope I can solve this problem any time soon.

Regards,
BlackMaterial.

Do your speakers work correctly on other equipment?

Do they work correctly if you set them to stereo?

Regards....Mike Connor
My System SpecsSystem Spec
10 Apr 2011   #16
BlackMaterial

Windows 7 Professional 64 Bit
 
 

They worked correctly on my old computer.

They are currently set to stereo.
I have difficulty setting Windows Sound (Control Panel --> Sound) correctly AND my drivers for my speakerset.
I can set it to stereo in both Windows Sound as in my driver.
And, I am getting confused.

Could you give me some suggestions such as;
set X as Y etc.

I hope I don't ask for too much.

Regards,
BlackMaterial
My System SpecsSystem Spec
10 Apr 2011   #17
Mike Connor

Several, including Windows 7 x64 Ultimate
 
 

Quote   Quote: Originally Posted by BlackMaterial View Post
They worked correctly on my old computer.

They are currently set to stereo.
I have difficulty setting Windows Sound (Control Panel --> Sound) correctly AND my drivers for my speakerset.
I can set it to stereo in both Windows Sound as in my driver.
And, I am getting confused.

Could you give me some suggestions such as;
set X as Y etc.

I hope I don't ask for too much.

Regards,
BlackMaterial
I think you are trying to adjust too many things. I am going to look through this whole thread again and see if I have missed anything. I will be back as soon as I have a solution............

Regards....Mike Connor
My System SpecsSystem Spec
10 Apr 2011   #18
BlackMaterial

Windows 7 Professional 64 Bit
 
 

Thanks for staying with me Connor,
I am 80% sure I am doing something wrong myself.
And 20% sure something in the computer itself is wrong.

On a side note;
I get sound out of all 5 speakers and 1 subwoofer, that means that the hardware is installed correctly and works fine, correct?

Regards,
BlackMaterial.
My System SpecsSystem Spec
10 Apr 2011   #19
Mike Connor

Several, including Windows 7 x64 Ultimate
 
 

Open your "Control Panel", and choose "Device Manager";

You should get a window like this. When you click on the small arrow next to "Sound, video and game controllers" ( I have marked this in the image), what does it say?



Regards....Mike Connor
My System SpecsSystem Spec
10 Apr 2011   #20
Mike Connor

Several, including Windows 7 x64 Ultimate
 
 

Quote   Quote: Originally Posted by BlackMaterial View Post
Thanks for staying with me Connor,
I am 80% sure I am doing something wrong myself.
And 20% sure something in the computer itself is wrong.

On a side note;
I get sound out of all 5 speakers and 1 subwoofer, that means that the hardware is installed correctly and works fine, correct?

Regards,
BlackMaterial.
Not necessarily. Some things work, but only poorly when they are not set up properly.
My System SpecsSystem Spec
Reply

 Scrambled Noise At Higher Frequencies




Thread Tools




Similar help and support threads
Thread Forum
Radio frequencies?
Is it possible to pick up radio frequencies and interference on computers? I opened my Windows Media Player today and heard, very quietly, a talk radio show and was flabbergasted. It has never, ever, ever happened before. I don't listen to internet radio so I don't know what it could be. ...
Hardware & Devices
cpu fan rpm slowly gets higher and higher
This has been happening for around 3 days. When I start the computer (desktop) up, the rpm is normal but it slowly starts to speed up. After around 5 minutes, the fan starts moving at a average of 4000rpm and it's really starting to worry me. I thought it might have been something to do with dust...
Performance & Maintenance
Higher Resolution or higher texture/detail?
which in your opinions is better? a higher resolution and lower textures and details or lower resolution, but higher textures and details. the highest resolution i am able to achieve is 1366x768. so nothing past there
Graphic Cards
Crysis 2 DirectX 11 error "Frequencies are not supported"
Hello all, like the title says I have a problem with Crysis 2. I installed the high textures and the dx11 pack. As I started the game my screen went black and I saw a blue box on my screen saying: "Frequencies are not supported". I only can window the game and then I can see the game...
Gaming
Scrambled noise like video tape being rewound then Freeze
HI, trying to figure out what can cause a computer to freeze when it starts off by making a scrambled noise like the sound of a video tape being rewinded or fast fowarded. The video sometimes jumbles before the freeze too, but most of the time, you just get the *rewind* noise and then it...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 16:20.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App