Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Sabertooth 990FX onboard Microphone..

24 Aug 2012   #1

Windows 7 Home Premium
Sabertooth 990FX onboard Microphone..

Hi guys,

Basically I'm making some let's play YT vids and I have a Roccat Kave 5.1 SS headset. I can't get any volume that's acceptable on the mic unless it's at 30 decibels, but that's just feedback heaven.

I used to use the same mic as Tobuscus the Yt'er but still I got feedback at 30 decicels.

I'll list what I've already tried..

- Turning the Decibels (Making mic recording output louder but creates unnecessary feedback)
- Recording externally in a different software like Audacity and trying to turn it up (Annoying feedback because of decibels)
- Checked for driver updates etc.
- Same difference in both stereo/5.1 headsets.
- CLEAN install of windows!

Does anyone have any ideas?

The only solution I can think of is a sound card. But how will that guarantee it will work?


EDIT: And on my sound mixer my headphones are controlled by the overall speakers. Even when I turn the sound down via my head set the sound on the system follows which shouldn't happen.

My System SpecsSystem Spec
25 Aug 2012   #2

Windows 7 Home Premium

Hmm, and I've stumped the forum.
My System SpecsSystem Spec

 Sabertooth 990FX onboard Microphone..

Thread Tools

Similar help and support threads
Thread Forum
BSOD After using ASUS Sabertooth 990FX MOBO OC Utility.
Hello all, I am new to OC. I just wanted to see what my system could do. The motherboard has a built in OC utility in BIOS. The motherboard has three settings you can click on, Energy Efficient, Normal, and OCBurner(or something of that nature). I have Open Hardware Monitor always running. My temps...
BSOD Help and Support
My Asus Sabertooth 990fx reading RAM wrong and Video card issues.
My Motherboard reads the RAM lower than the speed it is suppose to go, when I have installed G-Skill Sniper 8GB 2x4GB 1600 Mhz. But when I manually choose it too 1600Mhz it wont boot. Also my EVGA GTX 660 SC 2GB's FPS has been dropping from like 100 - 30 in some Source games like GMOD. I have never...
Hardware & Devices
Install windows 8 on sabertooth 990fx R1
as above says is this possible
General Discussion
I need help overclocking new sys FX-8150 Bulldozer and 990FX Saber
Wow, this place seems full of intelligent people please share! I need some help figuring out all of these settings, I see people with 5.00Ghz and higher and have settings of 250 FSB and a multiplier at 20 etc. It's obvious I have no idea what I'm doing. I either don't boot or BSOD. If anyone...
PC Custom Builds and Overclocking
Sabertooth 990FX wont let me set ram to 1866
hello, having a bit of a problem, i have g skill sniper 1866 9-10-9-28 ram when i go into the BIOS it only allows me to go up to 1600, but the manual and board clearly says itll work with 1866 anybody know if im going to have to overclock? the site doesnt say i should need to. any help...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:38.
Twitter Facebook Google+