Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Realtek HD Audio RCA Recieve No surround

12 Aug 2013   #1
Trenidor

win 7 64bit
 
 
Realtek HD Audio RCA Recieve No surround

Hey all,

I got a new (old/used) RCA Receiver (RV-9953A) and 5 monitors and a subwoofer. When I put in a cd or run the test tone on the receiver all of the speakers and subwoofer check out--no problems.

When I run a test on the Realtek HD Audio Manager however, it doesn't want to play from the back speakers and it acts like it's in stereo mode (but the subwoofer works).

Is there something I'm missing about how to set up windows/realtek to play my audio in 5.1 format?

Thanks!


My System SpecsSystem Spec
.
12 Aug 2013   #2
Trenidor

win 7 64bit
 
 

Ok, turns out what is happening is my onboard Realtek sound card is only exporting either the front or the back--but I have the sound input (and this is the only way to do it) as a left and right RCA cable (goes from 1/8" to RCA) Is there a way to mix the two lines on my computer before they output?
My System SpecsSystem Spec
13 Aug 2013   #3
fireberd

Windows 10 64 bit
 
 

What is the link to the RCA? Digital or Analog? Where are you getting the 5.1, playing something on the RCA?

A little more info, please.
My System SpecsSystem Spec
.

13 Aug 2013   #4
Trenidor

win 7 64bit
 
 

Ok, I've been looking into this.
I have the realtek ALC662 onboard. It has 3 (2.1) output/input jacks. My receiver only has left and right stereo RCA cable inputs. (I have a 1/8" to RCA cable)
What I believe is happening is when I set my realtek to surround, it transmits the signal through 2 of the 3 (2.1) ports. (rearL+R and frontL+R) But my receiver is set up to do Dolby Pro Logic, and only connected through the frontL+R port.

So I suppose the next step is: how do I set my realtek sound card to export an encoded front and the rear signal through only one of the ports so that it can be decoded by the receiver? OR is there more to this than I am thinking?
My System SpecsSystem Spec
13 Aug 2013   #5
fireberd

Windows 10 64 bit
 
 

If you are just running analog audio from the speaker out jack, you will only get two channel stereo. You would have to hook up the three speaker outs to equivalent inputs on the receiver to get surround sound.

The other option, if there is a digital S/PDIF output on the PC and you have an S/PDIF input on the receiver you MAY get surround sound. Some PC digital outputs are just two channel stereo and some are multi channel surround sound. I can't say what yours is.
My System SpecsSystem Spec
13 Aug 2013   #6
Trenidor

win 7 64bit
 
 

Ok, maybe that's how it does it... through s/pdif --So is there any way I could take 2 analog stereo outs and convert them to S/PDIF multichannel?
My System SpecsSystem Spec
13 Aug 2013   #7
fireberd

Windows 10 64 bit
 
 

The S/PDIF would have to be generated in the PC and a separate S/PDIF output. Combining the Analog 2 channel stereo to digital will not generate a surround sound signal.

According to the spec's for the motherboard, there is an S/PDIF header (port) on the motherboard. If the receiver has an S/PDIF input, you could connect to the motherboard header with the proper connector and use that.
My System SpecsSystem Spec
Reply

 Realtek HD Audio RCA Recieve No surround




Thread Tools




Similar help and support threads
Thread Forum
Realtek HD Audio Manager Cannot Switch Surround Type
Hi, I'm trying to watch a movie with my headphones for best sound experience. But when I open up Realtek HD Audio Manager and try to change the settings from Stereo to 7.1 Speaker, the program freezes, has a black box on top, and then changes back to stereo. It would also sometimes go blank, as in...
Sound & Audio
Realtek HD Audio 5.1 surround sound plus frontmic?
Hello, I've been looking for a solution to this problem for hours and I can't seem to find anything. I'm trying to keep the 5.1 Surround sound and have my front jacks working so i can use my mic for things without unplugging anything in the back and switching to quad. please help me.
Sound & Audio
Difference between Realtek HD Audio Manager & Realtek HD Audio Driver
It's been a year since I migrated from Windows XP to Windows 7 which I downloaded Realtek HD Audio Manager R2.70 and audio has been working fine except the only issue it didn't come with 'Stereo Mix' preventing capability to record sound direct from the soundcard. It took me 14 months to restore...
Sound & Audio
5.1 Surround Problems with Realtek HD Audio Manager
Hi everyone! First post on the forums =P What the title says. Basically I have had to remove my soundcard (a Creative X-Fi Soundblaster) as it was completely blocking off the fan on my new graphics card (ATI Radeon HD 5850 - and yes there is no space left on my motherboard!). As a result I have...
Sound & Audio
Surround Sound + Realtek
OK So! Ive tried EVERYTHING even bought a new set of speakers thought the others were broken. I am running windows 7 ultimate and i have tried every realtek driver known to man. And I still can't get my surround sound to work I haven't re-assigned the jacks cause i am not to sure how to do that...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:48.
Twitter Facebook Google+