Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Audio Settings

23 Jan 2018   #1

Windows 7 64 bit
Audio Settings

I have an HP Probook 4530S, running Windows 7. It is connected to a Yahama Receiver (RX V765). The HDMI out from the Probook is connected to the receiver which sends the video to a TV and the audio to surround speakers. That works fine. The receiver has an audio Zone 2 that I output to an external amplifier to drive outdoor speakers. Zone 2 requires analog sound.The only audio output from the laptop, other than HDMI, is the headphone jack. I have that connected to an analog input jack on the receiver.It just does not work. All other devices connected to the receiver's zone 2 analog inputs are pushed out to the speakers and work fine.

The laptop connection is the only one that does not work.I was going to use an HDMI to RCA converter (HDMI in - HDMI/RCA out) and attach that to the HDMI port. But, those devices all convert the HDMI out audio to two channel and they require that the source (laptop) is only a 2 channel output.

How do I tell if the laptop audio output is 2 channel?

I could solve the problem without using the converter if I could get the headphone jack to send a signal to the receiver at the same time the HDMI is also sending a signal to the receiver. The problem is probably caused by the Windows 7 audio settings, but I have tried just about every option, and none of them are working. Probably because I really am a novice at these things.

Any thoughts or suggestions would really be appreciated.

My System SpecsSystem Spec
23 Jan 2018   #2

Windows 10 64 bit

Windows only allows one default audio playback device. If the HDMI is active then HDMI is set as the default audio playback device and nothing will come from the PC's sound. You can manually select the "Speakers" (PC Sound) as the default audio playback device and get sound from the headphone jack.

If you only want to use the headphone audio, disable the HDMI audio in the Device Manager. Then when HDMI is active (for video) the Speakers will still be the default audio playback device.

To access the Sound Panel, go to Control Panel/Hardware and Sound and finally the Sound Playback panel.
My System SpecsSystem Spec
23 Jan 2018   #3

Windows 7 64 bit

My System SpecsSystem Spec

24 Jan 2018   #4

Linux Mint 18.2 xfce 64-bit (VMWare host) / Windows 8.1 Pro 32-bit (VMWare guest)

I would be careful about connecting the computer's headphone-out jack to the analog input jack on the receiver. The headphone jack is amplified and will cause distortion in the sound. Also, your receiver could get damaged if the signal is too strong. If you have a line-out (unamplified) jack on the computer, use that rather than the headphone-out jack.

To work around this problem, you could get an attenuating patch cable. (Attenuation reduces the signal). Here is one which would solve the problem:

Here is an explanation of why attenuation is needed:
My System SpecsSystem Spec
24 Jan 2018   #5

Windows 7 64 bit

Thank you.
My System SpecsSystem Spec

 Audio Settings

Thread Tools

Similar help and support threads
Thread Forum
Advanced Audio Settings/Controls
This isn't so much a problem as more of something I'd like to know about. I'm curious as to whether there are advanced audio controls in Windows 7 somewhere, something like XP's controls where you could control the wav and all sorts of different audio levels. Wanting to know because with earphones...
Sound & Audio
Audio settings not saving after shutdown
Every time I start my computer (running 64but Win 7 pro) I have to go to the Sound devices and change the settings. The do not save when windows shut down. What can I do?:confused: Thanks
Sound & Audio
Cant change audio output settings
Hey everybody! Its my first thread in here after a week of searching the web back and forth for solutions! I just installed win 7 (ultimate X32) on my computer, and i want to set the realtek audio card so i can hear sound through the front headphones and i cant get the audio to work! I have...
Sound & Audio
Keep Audio Settings
I just got a Windows 7 computer and have a question. Is it possible to save your SRS audio settings ? I get them set up just like I like them, but when I plug in then unplug some headphones, the audio settings go back to default. Is there a way to tell the computer to use one setting for headphones...
Sound & Audio
The Cure Trilogy Blu ray best audio settings?
Hi guys i have a doubt since long time ago. I have a PC, two bose companion II speakers, a blu ray unit and an omega striker 7.1 audio card. If i play a bluray i have this audio options: 1) LPCM Stereo, i've already known this if for a two speakers system. 2) Dolby Digital 5.1. Is this...
Music, Pictures & Video

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:39.
Twitter Facebook Google+