Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: no right channel audio

26 Apr 2018   #1

no right channel audio

Hi, new user here at a loss.
So a few days ago I bought a new set of 2.1 speakers after the old ones died. At first everything was fine but today I noticed the right speaker wasn't outputting any sound. Fearing they already broke I hooked them up to an mp3 player and everything played, included the right speaker. After that, I plugged a pair of headphones into the front pc jack and that worked fine too. Then I plugged the speakers into the same headphone jack and remapped it as speakers in realtek manager. Again no sound from the right speaker.
Additionally, when I test the sound in windows control panel, not realtek, it plays the subwoofer as right channel and the left speaker as left. Testing the sound in realtek manager doesn't output anything for the right channel at all. I know the speakers work and it doesn't look like it's the mobo either. Any idea how I could fix this because I really don't know what's going on..

My System SpecsSystem Spec
26 Apr 2018   #2

Windows 10 64 bit

From your description, it has to be some wiring issue in the speaker system. You havent noted what the speaker system is (or the PC) so we have to guess. But in most 2.1 systems there is one cable to the PC (usually a green color jack) that connects to the bass speaker in the 2.1 system. Internally there are cables from the bass speaker to each of the other two speakers. If a cable is not fully inserted or not in the proper connection in the bass speaker that could be an issue.
My System SpecsSystem Spec

 no right channel audio

Thread Tools

Similar help and support threads
Thread Forum
Audio Only out of one channel (multiple headsets and audio devices)
I have three audio devices on my pc (ATI HDMI, Via HD onboard and steelseries usb soundcard) and through all devices I only get audio out of the left channel. I have tried two pairs on headphones and my tv speakers all with the same results. I have looked at all the balancing end everything is set...
Sound & Audio
VIA HD Audio Not Working w/ 5.1 Channel Speakers
I got a new computer, and it appears the integrated sound card does 100% well on my 5.1 speakers. The new motherboard's integrated soundcard has 6 audio jack-ports in the back (the typical multi-colored jacks for front/back/center/side speakers). Problem is that my speaker system only has 1 audio...
Sound & Audio
pls do I have 5.1 channel audio output?
hello, just purchased Acer AX3950-U3022, trying to determine if 5.1 channel audio is put out. It's a refurb from SenecaData; two requests in to seneca data tech support ; so far, they cannot tell me. Other than one HDMI output, the only audio output is what looks like standard green analog jack;...
Sound & Audio
Live TV HD Channel 5.1 Audio Stutter
I searched around the forums for this, but couldn't pin point a post describing the same situation. Basically this is what is happening... I'll be watching Live TV on a HD channel with 5.1 audio. Everything sounds find and then the audio starts to rapidly cut in and out (like...
Media Center
Audio Left/Right Channel
Hi guys, I'm new here and I need some help with Windows 7. I have a HP Pavilion dv5-1234ca. I'm using IDT High Definition Audio CODEC. But if I go Properties > Levels > Speakers > Balance, when I want to listen to only the left channel, even if I turn down R channel, the audio i get from the...
Sound & Audio

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:26.
Twitter Facebook Google+