Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: How to make Stereo (2ch) to 5.1 DTS (6ch)

08 Jan 2010   #11

Windows 7 X64

Quote   Quote: Originally Posted by neizod View Post
I have a DTS soundcard with DTS Connect (DTS Interactive & DTS Neo:PC). I have enable it, but no 5.1 sound out from my receiver.
My receiver can decode DTS, but its has 5.1 system, not 7.1. So i wonder if it can play or not, because DTS Neo PC says it will make 7.1 out.

At last, i wonder if the driver of my Xonar DS isn't compatable with Windos 7, i will figure it out on Vista re-install tonight. ^^

Are you sure your sound card will encode DTS on the fly. Most optic fiber sound cards will pass DTS. My card will encode mp3 to Dolby Digital Multichannel 5.1 surround. Does you card say it will do that? Mine will not encode DTS to anything. Mine will play back or decode DTS from say a DVD. Big difference. I have not seen any sound cards that will encode an mp3 to DTS on the fly. I'm sure one exist but I doubt it would be a consumer card. I could be wrong about all this but I don't think so.

Big difference between DTS and Just Multichannel Dolby Digital Too.

My System SpecsSystem Spec
13 Jan 2010   #12

Windows 7 x64 Ultimate RTM

Solve! go to control panel, sound, and change default device from S/PDIF pass-through to Speaker.
A little bit dummy, am I. ^^"
My System SpecsSystem Spec
14 Mar 2010   #13

Sound Problem

I have 5.1 Audio Card SL-8866-SRD 5.1 PCI.I can watch DVD normally with 5.1 sound but when i play some music the sound get's oute only from the 2 speakers and the sub.I want to get the sound to come out of all six speakers but it will still only be in two channel mode but i dont know how to do that can somebody help!

PS:Sorry for the english i am newbie
My System SpecsSystem Spec

02 Dec 2012   #14

Windows 8 Professional x64

I was using the following setting for windows 7 (x64) for past 1+ year, whenever I wanted to use the D2X's DTS or Dolby Upmixing for my 6 channel analogue output. Though with windows 8 driver release this issue is fixed in the new BETA driver released for ASUS Xonar D2X.

Control Panel ---> Hardware and Sound --> Manage audio devices

Double Click the desired sound device (sound card) ---> Click the advanced Tab

Change The Default Format to "16Bit, 44100 Hz (CD Quality)" --- Apply.

Now turn on the dolby or dts upmixing... DONE
My System SpecsSystem Spec

 How to make Stereo (2ch) to 5.1 DTS (6ch)

Thread Tools

Similar help and support threads
Thread Forum
How to make Windows make a sound when done pasting
I often copy and paste very large files, 50 gigs and so on and it takes a very long time. Is there a way for windows to make a sound when the copying is done? Thanks
General Discussion
Stereo Mix
Hi Folks, How do I make 'Stereo Mix' as default permenant. Everytime my friend starts or reboots his pc it changes to IDT High Definition Audio CODEC. New HP PC Win7 Home Prem 64bit
Sound & Audio
Will it make difference to make partition at beginning or end of HDD?
Hi. I have two hdds (500gb 7200rpm) in my laptop and have 260gb of data on the second one. I wanted to create a partition for games at the beggining of the 2nd drive (the left side) as i heard it increased performance to put games in anoher drive and at the beggining of the drive. My question...
Performance & Maintenance
Help with stereo mix?
Yes, I have shown disabled and disconnected devices; in fact stereo mix appears fine. The problem is, to use it, I have to set it to default device, and when I do, my microphone becomes "currently unavailable." If I want to use the mic, I set it to default device, and... stereo mix is ...
Sound & Audio
Make ISO from DVD/Change to univeral install make USB
Ok I've only been a member for a short time and like this site. Lots of info. What I want to do is make a Win 7 ISO file from my DVD install disk. Which is a retail upgrade version. Then I want to change the install routine to make that ISO a universal install ISO. Then I want to make a USB...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 04:20.
Twitter Facebook Google+