Description|Driver|Download
Intel RST (Rapid Storage Technology)|
iaStorA.sys
|
Download
iaStorA.sys is a driver . Update the driver by clicking on the Download button above .
Lets scan for viruses ---------------------------------
Note
Backup your flash drive cause it will be wiped doing the steps below
Create a HitmanPro Kickstart USB flash drive, on a “clean” (non-infected) computer, download HitmanPro from the below link.
Description
|
Version
|
Operating System
|
Download
HitmanPro with Kickstart|3.7.3.193|Windows 7 64-bit (x64)|
Download
Description
|
Version
|
Operating System
|
Download
HitmanPro with Kickstart|3.7.3.193|Windows 7 32-bit (x86)|
Download
Insert your USB flash drive into your computer and launch the HitmanPro program .
Inside the program, click on the flying kick icon . Once you see your flash drive icon inside the program click on it and click on the Install Kickstart button ( this will wipe the flash drive ) click Yes to continue .
Once you're done remove the flash drive using the safely hardware removal inside the systray next to the time on the right hand side . Icon has a green arrow .
Plug the USB drive to the infected computer and restart the PC . While the PC is starting up press F12 and choose USB device
Scan the computer with HITMAN and delete anything it finds and remove the USB drive and restart the PC .
Upload the log once completed .
Run this program FIRST
Let's see if the following will take care of the issue:
TDSSKiller
Description
|
Download
TDSSKILER|
Download
Right-click the program and select: Extract to tdsskiller\
A TDSSKiller folder is found on your Desktop.
Open the folder, and double-click the TDSSKiller application.
When the TDSSKiller console opens, click on: Change Parameters
Under Additional Options, place a check in the box next to: Detect TDLFS File System
Click: OK
Press: Start Scan
If a suspicious object is detected, the default action is Skip, leave it as is, and click on: Continue
If malicious objects are found, they show in the Scan results.
Ensure Cure (the default) is selected, then click: Continue > Reboot now, to finish the cleaning process.
(Note: If Cure is not available, select Skip, >>Do not select: Delete<<)
When done, the tool outputs its log to the disk with the Windows Operating System, normally C:\
Logs have a name like:
C:\TDSSKiller.X.X.X_12.04.2013_15.31.43_log.txt
Note
you should be able to place the exe file inside a flash drive . Boot up to a command prompt at startup and run the tool from there .