BSOD after removing Alureon.a

thenecessity

Do you have a USB flash drive ? If you do you might want to get that ready

thenecessity,

Would appreciate some info from you:
Can you boot to the Advanced Boot Options, and if you can, do you have the Repair your computer option listed?

To find out:
Restart the computer.
As soon as the BIOS is loaded begin tapping the F8 key until the Advanced Boot Options menu appears.
Is the Repair your computer option listed? BTW, we will be using this option to get to a Command Prompt and run a tool.

If you do not have the option, or cannot boot to it, do you have your Windows 7 installation CD/DVD available?

Presuming you have access to another computer that is not infected, and, if you do not have access to Repair your computer, or a W7 Installation CD/DVD, we still have another option.

OK, we are ready to roll...

You will need a USB flash drive and access to a clean computer for the procedure outlined below.

Also, you may want to print these instructions so you can have access to follow them.

Please plug a flash drive into a clean computer.
Go to Start > Computer
Double-click Computer, and select the flash drive.
Right-click and select: Format
Press Start on the Format prompt.
Remove when done.

Now, the Operating System is 64-bit,so, proceed with Downloading Farbar Recovery Scan Tool
Save the program to the >> USB flash drive.
Next, plug the flash drive into the infected computer.

>>>Restart the computer.

• As soon as the BIOS is loaded begin tapping the F8 key until the Advanced Boot Options menu appears.
• Use the arrow keys to select the Repair your computer menu item.
• Select your language settings, and click: Next
• Select your User account and click: OK (If you did not set a password, leave blank.)

On the System Recovery Options menu you get the following options:

• 
  Startup Repair
  System Restore
  Windows Complete PC Restore
  Windows Memory Diagnostic Tool
  Scan your computer's memory for errors.
  Command Prompt

Select Command Prompt

Now, either use this option to find out the drive letter of your USB flash drive in the System Recovery Environment:

>>At the Command Prompt type the commands below, one at a time, and press ENTER after each:

Code:

Diskpart
List volume

>>Or, use this option to find out the drive letter of your USB flash drive:

• In the Command window, at the bliking cursor type notepad and press: Enter
• In Notepad, under the File menu select: Open
• Double-click Computer, find the flash drive letter, remember what letter it is, click on it, and press: Open
• Close out of Notepad.

Next...

• Click the Command Prtompt window
• Type g:\frst64.exe, and press: Enter
  Note: Replace the drive letter g with the drive letter of your flash drive!
• The tool starts and prepares to run. Follow the prompts.
• Click Yes to the disclaimer.
• Press the Scan button.
• The program saves the FRST.txt, on the flash drive.
• Click the Command prompt window, type exit, and press: Enter
• Back at the System Recovery Options, press: ShutDown

Please remove the USB flash drive from the infected computer, plug it into the clean computer, and copy/paste the FRST.txt in your reply.

thenecessity

You getting an error due to the drive letter .

Type in the commands below to get the drive letter of your flash drive

diskpart

press <ENTER>

list volume

press <ENTER>

Make note of the USB flash drive then run the command that Cottonball is referring to change G:\ to the actual USB drive letter