Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: You Shall Not Pass Virus - Help

02 Jun 2013   #1

Windows 7 Professional x64
You Shall Not Pass Virus - Help

Hey everyone...
I have a little problem and i don't know how to fix it. Today, my laptop was infected with a virus called "You Shall Not Pass" or something like that. The thing is that when i try to access a popular webpage like facebook or google, my browser displays me a image (help1.jpg). I remove the virus from the computer using malwarebytes, adwcleaner and avira. I also used Microsoft Fix It, but that did nothing. Even after restarting the laptop in safe mode and deleting the virus from there didn't helped. I also put a photo showing the window that appeared twice. Since i couldn't make a screenshot, i used my camera. The photo is called P1040104.png. I even tried to reinstall google chrome using my computer, but that didn't helped either. I still can't get rid of that annoying image!!!
Can someone help me please? Thanks in advance. If you need more information just tell me.

Attached Thumbnails
You Shall Not Pass Virus - Help-help1.jpg   You Shall Not Pass Virus - Help-p1040104.jpg  
My System SpecsSystem Spec
02 Jun 2013   #2

Windows 7 Home Premium


A new twist on good ol' ransomware.

Let's use HitmanPro.Kickstart to access your computer, scan it for malware, and remove this infection. The program targets ransomware.

Also, you may want to print these instructions, so they are available to follow.

Now, load a USB flash drive with HitmanPro.Kickstart as follows...
(Note: the contents of the USB flash drive are erased during this process!)

Use a clean (non-infected) computer, and download:
HitmanPro.Kickstart - Anti ransomware, politievirus, bundestrojaner, Reveton, BKA, GVU - SurfRight

Under Download (on the right) select the program applicable to the system: 64-bit?

When HitmanPro opens, click the KickStart icon at the bottom of the screen.

>>Plug in the USB flash drive.

When the USB flash drive is detected, a selection screen is presented.
Select the USB flash drive from the choices, and press: Install Kickstart

A warning that all contents of the selected flash drive will erase is presented.
Press: Yes

As the HitmanPro.Kickstart files are loaded, a progress indicator is shown on the screen.
Once the process is completed a screen is presented with the contents of HitmanPro.Kickstart

Remove the USB flash drive from the clean computer and press: Close

Now, with the ransomed computer shut down, plug the USB flash drive into a USB port, and turn on the power.

When the computer starts, press the key that brings up the Boot Menu. (On some machines its F12, F10, or F2)

From there, select to boot from the USB drive. (It may say 'Removable Drive' in the options.)
Info: How to Remove Ransomware - Select Real Security

Once you select the USB flash drive to boot from, press: Enter

A Kickstart prompt with USB boot options appears.
Select: 1 (Bypass the Master Boot Record (Default))

The system continues to boot from the hard drive and starts Windows.

If you get a message stating that Windows failed to start, etc., just select: Start Windows Normally

When Windows boots, you either get a logon screen, or the Desktop is started.
If you see a logon screen with your User name, logon with it.

In the next prompt that appears, to start the program without installing to the local hard disk, select the option to do a: One-time scan to check the computer.

To start scanning for malware press: Next

If malware is detected, the program shows what malware is present on the system using a red framed screen as shown below:

Select Next to quarantine the malware into a secure storage where it can no longer start.

At the next screen, activate the 30-day free license:

After successful activation (30 days), press: Next

A screen indicating that the malware was successfully disabled or removed is presented.
Press: Next

To obtain a report of the scan results, press: Save log
>>Save the Notepad log to the Desktop<<

It has a name such as: HitmanPro_xxxxxxxx_xxxx

Remove the USB drive, and press: Reboot
If no malware is found, press: Close

After HitmanPro.Kickstart is done, you should be back into normal Windows.

Please post the HitmanPro log in your reply. <<Important!

To remove any remnant malicious files of the ransomware...

Download RogueKiller:
Tlcharger RogueKiller (Site Officiel)

When you get to the website, go to where it says:
(Download link) Lien de téléchargement:

Select the version that applies to your system: x64 (?)
Click the dark-blue button to download.
Save to the Desktop.

Close all windows and browsers.

Right-click and select: Run as Administrator

At the program console, wait for the prescan to finish. (Under Status, it says: Prescan finished.)

Press: SCAN

When done, a report opens on the Desktop: RKreport.txt

Please provide the RKreport.txt (Mode: Scan) in your reply.
My System SpecsSystem Spec

 You Shall Not Pass Virus - Help

Thread Tools

Similar help and support threads
Thread Forum
windows 7 pro will not pass log in
Ok so i bought a laptop from ebay. Before i do a system backup or install an anti virus i stupidly dl some games long story short. I need help
General Discussion
windows 7 pro will not pass log in
Hey think i have a virus. Its a new laptop so i have no backup files or anti virus installrd
System Security
Getting Pass W7 UAC
Hi I'm not sure if this is the right place to post this but i need to install some programs for my use and the administrator has placed UAC on everything i try to install , it's not the typical UAC but the one where you have to type a password before it lets you click yes. I can't seem to do...
Installation & Setup
Format only, cant get pass it?
When I insert my phones memory card into my PC it says format. i cant get into it to get my pics off of it please can anyone help me?
Hardware & Devices
pass thru router ?
I have the router (wrt 310n) set up for a internal address of to 42.242.120 .254 - can I add a address of also ? or when a computer on the network is connected and types in I can forward to that address ?
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:47.
Twitter Facebook Google+