Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: No scan or update reports in MSE

17 May 2010   #11
jsmoline

Windows 7 Home Premium
 
 

Thanks again for the great help. Problem solved. You are the best,
John


My System SpecsSystem Spec
.
17 May 2010   #12
Brink

64-bit Windows 10 Pro
 
 

You're most welcome John. :)
My System SpecsSystem Spec
17 May 2010   #13
Kevinsilhouette

OEM version of Windows 7 Home Premium 64-Bit
 
 

So i have a question brink how do you run Avast with MSE cause i read that a lot of people run both together. Do you turn of Real Time Protection or do they co op fine with each other?
My System SpecsSystem Spec
.

17 May 2010   #14
Brink

64-bit Windows 10 Pro
 
 

I have them both running with real time protection turned on at the same time. They (Alwil & MS) had worked together to make sure that that they would not conflict with each other.
My System SpecsSystem Spec
17 May 2010   #15
Kevinsilhouette

OEM version of Windows 7 Home Premium 64-Bit
 
 

Thanks Brink! So should ignore the message that states i have two installed ?
My System SpecsSystem Spec
17 May 2010   #16
Brink

64-bit Windows 10 Pro
 
 

Could you post a screenshot of it to see if anything looks wrong with it? This is what I see, and it's fine.

No scan or update reports in MSE-av.jpg


My System SpecsSystem Spec
18 May 2010   #17
Kevinsilhouette

OEM version of Windows 7 Home Premium 64-Bit
 
 

Thats exactly what mine says thanks a mil brink!


Attached Thumbnails
No scan or update reports in MSE-untitled.jpg  
My System SpecsSystem Spec
18 May 2010   #18
Brink

64-bit Windows 10 Pro
 
 

You're most welcome Kevin. :)
My System SpecsSystem Spec
Reply

 No scan or update reports in MSE




Thread Tools




Similar help and support threads
Thread Forum
Windows Update Error Check SUR reports 28 errors
Getting update error for one .net 3.5.1 framework. Code: 80073712 checksure log ================================= Checking System Update Readiness. Binary Version 6.1.7601.22471 Package Version 26.0
Windows Updates & Activation
Intel BIOS update shows successful, but sys info reports no change
I had a video issue today and while looking at the Intel MB site, noticed my BIOS was out of date. I downloaded the Express (exe) file and tried to update my BIOS from 0123 to 0133, one year date apart. Problem is, Intel BIOS update program shows successful... but when I view sys info it still...
Hardware & Devices
Windows Update reports installed Update as not present
I successfully manually installed update KB2810009 (Belarc Advisor reports no missing updates), I did so because Windows Update reported a failed install. Probelm is that now Windows Update will report this update as missing each time I check for updates. If I let Windows install it, it will fail...
Windows Updates & Activation
DIR 615 reports link at 300Mbps, windows reports 150Mbps
Hello there, Recently setup my home wifi network, i had been noticing that my link speed to any device through my Dlink DIR 615 router, was always 65Mbps (as reported by the device), i searched around that i should set the channel width to 'auto 20/40mhz' to gain speed; however now that i did...
Network & Sharing
IE9-Update reports failed-but its there?
April 23 - there was a series of Windows Updates, among them was an update to Explorer 9. After the installs, the report showed Explorer 9 failed. I opened Explorer and it was updated. I checked its version and it was, indeed, version 9. So what is causing this report to show 'failed'? Should I...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:07.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App