Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: avg 9 Update ?

02 Jun 2010   #31
brightsun

 
 

avg 9 Update ?-capture.png




My System SpecsSystem Spec
.
02 Jun 2010   #32
brightsun

 
 

avg 9 Update ?-capture.png


My System SpecsSystem Spec
02 Jun 2010   #33
brightsun

 
 

JMH sorry for the threads which should be checked and which should not be please avg 9 Update ?-capture.png


My System SpecsSystem Spec
.

02 Jun 2010   #34
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

brightsun,
Your post 31 is the same as your post26. I answered that in my post 27.
Apart from that the rest should be ok.
My System SpecsSystem Spec
02 Jun 2010   #35
brightsun

 
 
AVG 9?

JMH post 31 is the same as post26. I know it is their is to different sub cat under scan do I check em in both ? and in post 33 Start memory can you tell me if it is checked dose it scan after update? and in post 33 should build be unchecked
My System SpecsSystem Spec
02 Jun 2010   #36
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

brightsun I did confirm in my post 34 that all appeared to be ok. In other words leave them how they are.
Re the System Restore Point being created [your post 35] - How often do you scan your system?
My System SpecsSystem Spec
02 Jun 2010   #37
brightsun

 
 

JMH my automatic update question here is a snip of settings question is when updates starts & finishes it dose not popup in tray as popup are settings set to popup ?avg 9 Update ?-capture.png


My System SpecsSystem Spec
02 Jun 2010   #38
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

brightsun,
I suggest you refer back to my post 9.
Does yours do the same?
If it does, that is the only pop up that will happen / is necessary.
If it doesn't that is of no great concern.

Should you still be worried, you could join the free forum & address your question there - or uninstall AVG & download a new program to see if that corrects your annoyance.
Let us know what you decide.
My System SpecsSystem Spec
02 Jun 2010   #39
brightsun

 
 
AVG 9?

JMH I just did a manual update to my AVG Anti Virus free version & noted that there was a "pop up"at the end as it downloads the updates. However I mean automatic updates there is no pop up that says "Update starts and completed successfully."dose it do it for you on automatic updates ?

My System SpecsSystem Spec
02 Jun 2010   #40
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

To the best of my knowledge the same thing applies as with manual updates.
Reality here is I don't have the spare time to watch my computer doing what it is set to do automatically.

May I ask why you are so concerned over such a small issue?
Note in your snip "Balloon Tray Notifications" it says "Display Tray Notifications about Update."
This does not imply it should show a pop up before & after the update.
My System SpecsSystem Spec
Reply

 avg 9 Update ?




Thread Tools




Similar help and support threads
Thread Forum
Win7 home update fails, error 8007370B - cannot update, install SP1.
Running Windows 7 Home Premium x64 Cannot update, attempting to upgrade to Win 7 professional. Discovered automatic updates were fried for some time and the system did not have SP1, which is apparently required for the upgrade. I see similar threads, each seems to require advanced...
Windows Updates & Activation
Windows Update fails in Update Check. Error code C80003FA.
Hello, I recieve error C80003FA whenever I do a Windows Update run. It doesn't get past the stage of checking for updates. I've tried several fixes including: - Waiting 15 minutes and running Windows Update again. - Letting Windows Update run on its own schedule. - SFC /Scannow -...
Windows Updates & Activation
Windows 7 - Update KB976932 and KB982526 update failure- error 800b100
Hey, I'm trying to install update KB976932 (Windows Service pack 1 for 64bit) and KB982526 (Microsoft .NET Framework 3.5 SP1) but I keep getting error 800b100 which stops me from doing so. I've tried deactivating my firewall; manually installing from the microsoft website; and using the...
Windows Updates & Activation
Update Error Code 80073712-Cumulative Security Update IE11, Win 7(64)
I'm having no luck installing KB2977629 (Cumulative Security Update IE11). I repeatedly get the error 8007371B. SURT installs with no errors. SFC /SCANNOW runs with no errors. I am uploading the requested screenshots and ZIP file. Any help would be appreciated. Thank you!!!! ...
Windows Updates & Activation
Unable to install Windows Update: Update Kernel-mode driver framework
I am unable to update the Kernel-mode driver framework ver 1.11 for windows 7 for x64-based systems (KB2685811). I get error: 80073712 Also, I am getting BSOD/stop errors in normal mode that say anything from: -memory_management 0x0000000001a, - "A device driver attempting to corrupt the...
Windows Updates & Activation
Multiple Update Failures / Win7 x64 - Unable to Update, Error 800b010
My problems are essentially those expressed in many previous posts, but specifically this one here was most pertinent (aside from the specific updates of course): https://www.sevenforums.com/windows-updates-activation/155225-win7-x64-unable-update-error-800b0100.html Here is a list of the updates...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:37.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App