Ko0bf4c3
New member
- Local time
- 1:23 PM
- Messages
- 17
Hey guys sorry if this is in the wrong section, but i'm looking to upgrade from a HDD to SSD. I've been reading online about my board and apparently the marvell 9128 controller sucks speed wise. I was looking at the Corsair Force 3 because of the read/write speeds. Upon doing more digging though it looks like id be better off running a drive on the SATA 2 ports. Would I then be better off getting a SATA 2 SSD for slightly cheaper?
I'm confused on what to do. Any advice would be much appreciated.
Cheers.
I'm confused on what to do. Any advice would be much appreciated.
Cheers.
My Computer
At a glance
Windows 7 Ultimate x64 / Win XP Pro x64Intel i7-930 @ 4.20Ghz (200 BCLK @ 1.25V QPI ...6GB Kingston HyperX DDR3 XMP=OFF Manual 1600M...ATI XFX HD5770 1GB PCI-E Graphics Card
- Computer Manufacturer/Model Number
- Custom 2.0
- OS
- Windows 7 Ultimate x64 / Win XP Pro x64
- CPU
- Intel i7-930 @ 4.20Ghz (200 BCLK @ 1.25V QPI 1.30V)
- Motherboard
- Asus P6X58D-E Motherboard
- Memory
- 6GB Kingston HyperX DDR3 XMP=OFF Manual 1600Mhz OC
- Graphics Card(s)
- ATI XFX HD5770 1GB PCI-E Graphics Card
- Sound Card
- Onboard 7.1 Sound
- Monitor(s) Displays
- Hanns-G HL225DBB
- Screen Resolution
- 1920 x 1080
- Hard Drives
- 200GB SATA II - OS
1TB SATA II External
400GB IDE External
- PSU
- OCZ StealthXStream II 600w 80+ PSU
- Case
- Thermaltake Mozart TX
- Cooling
- Thermaltake Bigwater 745 (35c Idle / 69c Load)
- Keyboard
- Standard USB
- Mouse
- Standard USB
- Internet Speed
- 100Mb Virgin Media Cable - 100Mbit Down / 10Mbit Up
- Other Info
- 7x 120mm Thermaltake Case Fans