Big big big USB problem

[INO100]

OK here's the problem. I use 2 usb drive WD pasport and on vista evrything was working just fine. But when I switched to 7 I got a big problem. When I try to put somme stuff in them its start working and transfering but after like 10 sec you see the bar is still working but there is no progress and nothing to tell you that it failed. If y press cancel nothing appen and the transfert still try to be done. I have to unplug my usb drive and shut down explorer.exe to stop it. And when I replug my hardrive it wont reconise until I reboot my computer. And ever since I used 7 I cant sync my ipodtouch enymore too. "The device time as expire" that the message. And same problem I unplug, I plug and poooof not reconise enymore. All my drivers are up to date and all the patches as been made.

 

[Lordbob75]

Motherboard drivers?

~Lordbob

 

[zigzag3143]

Yep mobo drivers, and something is preventing itunes from sync'ing.

You might want to run a system file checker. that checks the system files and repairs them if necessary.

to run type this in search. cmd>right click and run as admin> sfc /scannow

Let us know the results

Ken

 

[thefabe]

You say all your drivers are up to date. Yet we can't check on what's what until you fill in your system specs in your user CP at the top of the page>then edit system specs. Thanks and welcomre to sevenforums. (Snips curtiousy Antman)

 

[INO100]

Done so can somone help me ?

 

[bobkn]

Chipset drivers?

Here are the latest for your 630i/7100 board:

NVIDIA DRIVERS 15.49 WHQL

These are for Win7 X86 (32 bit).

Good luck.

 

[INO100]

Mine is 64x and its allerdy up to date

 

[bobkn]

Any yellow exclamation marks in Device Manager?

 

[INO100]

Nop

 

[Mark Phelps]

Had similar problems with external USB hard drives and found a combination of the following would SOMETIMES help:
1) Connect the hard drive to a port on the machine iteslf, not to a hub (even a powered hub). Best case, a port on the back of the case. Sometimes, hubs (and even front ports) don't provide enough power for hard drives.
2) Check your USB settings, and once you've confirmed that the ports to which you're connecting the drives are all USB 2.0, change the BIOS setting to disable USB legacy support.

 

[Adrian]

X64

Ino, what version of ITunes is installed?
Sync failure is indicative of missing IMobile support files and drivers.

 

[jarch]

Me too

To: INO100
Mine system got exactly the same problem. Acer Aspire M1641, usb works fine in Vista x64, but in Win 7 x64, usb just not working right.
Let me know if there's any solution. Thanks.

 

[ricarduh9]

i have the same problem and i have the solution
You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM

you can download the hotfix (kb976972) here
RapidShare: 1-CLICK Web hosting - Easy Filehosting