Blue and Black SOD's frequently,...but comp works fine afterwards.

VegasJamie

New member
Local time
1:48 PM
Messages
21
Good Morning everyone,

I have posted on this site a few times, with great success from the responses I receive. Thanks in advance for your help.

My computer is two years old, and when I purchased it, I added an SSD, and an ASUS U3S6, wiped the factory HD, and did a clean install of the OS on the SSD. About two months afterwards, with no other hardware installs, I started receiving random BlackSOD's saying:

Status : 0xc000000e

Info: The boot selection failed because a required device is inaccessable.

This occurs up to today, but happens roughly once every two weeks or so. Each time I simply let the computer restart, and everything is fine.

As for the true BSOD's, those occur on roughly the same schedule, but not at the same time. I have also noticed after my computer 'awakes' it sometimes locks up, and I'm forced to hard boot. Selecting 'restart' puts the machine in limbo for almost an hour before it does so. The start menu is also back to an original state, meaning the icons are not the ones I configured, or are not there at all.

I've been patient with these problems, and don't feel as though I've done any damage to my machine,....everything works fine after an event, and I am not able to notice any performance differences. No data has been lost, either.

I'm here today to get some insight about my issue, and hope some of you can interpret my attached ZIP file...it's Russian to me....:)

Thanks again.
 

My Computer My Computer

At a glance

Windows 7 H.Pi7 930 @ 2.8 GHz.12 GBRadeon 5870
Computer Manufacturer/Model Number
Dell Studio Xps 9100
OS
Windows 7 H.P
CPU
i7 930 @ 2.8 GHz.
Memory
12 GB
Graphics Card(s)
Radeon 5870
Monitor(s) Displays
Dell U2410
Screen Resolution
1900x1200
Hard Drives
Crucial C300 60GB SSD
WD 1.5 TB HD
Keyboard
Logitech K350 Unified Wireless
Mouse
Logitech M510 Unified Wireless
Internet Speed
10+ MB/s
Hi..
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa800bdc5b30, fffffa800bdc5e10, fffff800031c7470}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------

7: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa800bdc5b30, Terminating object
Arg3: fffffa800bdc5e10, Process image file name
Arg4: fffff800031c7470, Explanatory message (ascii)

Debugging Details:
------------------

----- ETW minidump data unavailable-----

PROCESS_OBJECT: fffffa800bdc5b30

IMAGE_NAME:  csrss.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MODULE_NAME: csrss

FAULTING_MODULE: 0000000000000000 

PROCESS_NAME:  csrss.exe

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

BUGCHECK_STR:  0xF4_c0000005

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

CURRENT_IRQL:  0

STACK_TEXT:  
fffff880`098e90e8 fffff800`0324f5e2 : 00000000`000000f4 00000000`00000003 fffffa80`0bdc5b30 fffffa80`0bdc5e10 : nt!KeBugCheckEx
fffff880`098e90f0 fffff800`031fb47b : ffffffff`ffffffff fffffa80`0c92b060 fffffa80`0bdc5b30 fffffa80`0bdc5b30 : nt!PspCatchCriticalBreak+0x92
fffff880`098e9130 fffff800`0317c4f4 : ffffffff`ffffffff 00000000`00000001 fffffa80`0bdc5b30 00000000`00000008 : nt! ?? ::NNGAKEGL::`string'+0x174f6
fffff880`098e9180 fffff800`02ebeed3 : fffffa80`0bdc5b30 fffff800`c0000005 fffffa80`0c92b060 00000000`029c0a20 : nt!NtTerminateProcess+0xf4
fffff880`098e9200 fffff800`02ebb490 : fffff800`02f0a8df fffff880`098e9b78 fffff880`098e98d0 fffff880`098e9c20 : nt!KiSystemServiceCopyEnd+0x13
fffff880`098e9398 fffff800`02f0a8df : fffff880`098e9b78 fffff880`098e98d0 fffff880`098e9c20 00000000`77879c12 : nt!KiServiceLinkage
fffff880`098e93a0 fffff800`02ebf2c2 : fffff880`098e9b78 00000000`00000000 fffff880`098e9c20 00000000`029c1128 : nt! ?? ::FNODOBFM::`string'+0x488e4
fffff880`098e9a40 fffff800`02ebde3a : 00000000`00000001 00000000`029c0fd8 00000000`00000401 00000000`00000000 : nt!KiExceptionDispatch+0xc2
fffff880`098e9c20 00000000`77879ac6 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a
00000000`029c0fe0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77879ac6


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

FAILURE_BUCKET_ID:  X64_0xF4_c0000005_IMAGE_csrss.exe

BUCKET_ID:  X64_0xF4_c0000005_IMAGE_csrss.exe

Followup: MachineOwner
---------
A bug check F4 is often storage related. Have you checked for a firmware update for your SSD?
Please follow this:
If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

You are running multiple antivirus software, this can create serious problems.

Please remove all the programs listed below:
Code:
Start Menu\Programs\Ad-Aware Antivirus	Public:Start Menu\Programs\Ad-Aware Antivirus	Public
Start Menu\Programs\AVG	Public:Start Menu\Programs\AVG	Public
Uninstall using the free version of Revo uninstaller in advance mode to delete registry entries.
You shouldn't be running two antivirus software: is it bad to run multiple antivirus programs? - BleepingComputer.com

Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-


   Warning
:ar: Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.
System Optimisers
Code:
Start Menu\Programs\Auslogics	Public:Start Menu\Programs\Auslogics	Public
Start Menu\Programs\Auslogics\Disk Defrag	Public:Start Menu\Programs\Auslogics\Disk Defrag	Public
Start Menu\Programs\PC Tools Registry Mechanic	Public:Start Menu\Programs\PC Tools Registry Mechanic	Public
The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence.

If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. Use the in-built Disk Cleanup and Extended Disk Cleanup if required to do so, regarding de-frag utilities, I recommend yet again the in-built http://www.sevenforums.com/tutorials/11733-disk-defragmenter-open-use.html & Puran Defrag which is much reliable compared to others.
Perform a System File Check to check the integrity of all protected Windows 7 :
  1. Click on the start :orb:
  2. Type CMD on Search
  3. Left click and Run as Administrator
  4. Type
    Code:
    SFC /scannow
Full tutorial here:
Disk Check on your hard drive for file system errors and bad sectors on it.
Reduce items at start-up. Nothing except anti-virus is required plus improves the time for logging in windows.
Let us know the results.
 

My Computer My Computer

At a glance

Windows 10 Home 64BitIntel Core i5 10400 @ 2.90GHz8.00GB Single-Channel Unknown @ 1329MHz (16-2...
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Self assembled
OS
Windows 10 Home 64Bit
CPU
Intel Core i5 10400 @ 2.90GHz
Motherboard
Intel Corporation DG41WV (PROCESSOR)
Memory
8.00GB Single-Channel Unknown @ 1329MHz (16-20-20-38)
Sound Card
Realtek High Definition Audio
Monitor(s) Displays
DELL E170S
Screen Resolution
1280x1024 pixels
Hard Drives
931GB TOSHIBA DT01ACA100 (SATA)
238GB TEAM TM8PS7256G (SATA SSD)
Case
Nothing Fancy
Cooling
Fans
Keyboard
A4 Tech Co LTD
Mouse
A4 Tech Co Ltd/Logitech
Internet Speed
25 Mbps
Back
Top