Blue screen Playing GTA V.

[Jay2OR]

Hi,

i got a blue screen when i was playing gta V dunno what is happening

 

[ICIT2LOL]

Hello Jay mate there seems to be something in the filing system relating to drivers that I do not quite understand.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8a00d0d6000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8800a9e285f, If non-zero, the instruction address which referenced the bad memory
 address.
Arg4: 0000000000000000, (reserved)
Debugging Details:
------------------

Could not read faulting driver name
READ_ADDRESS:  fffff8a00d0d6000 Paged pool
FAULTING_IP: 
MSKSSRV!BuildFilterData+3ab
fffff880`0a9e285f f30f6f4920      movdqu  xmm1,xmmword ptr [rcx+20h]
MM_INTERNAL_CODE:  0
CUSTOMER_CRASH_COUNT:  1
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
BUGCHECK_STR:  0x50
PROCESS_NAME:  dxdiag.exe
CURRENT_IRQL:  0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
TRAP_FRAME:  fffff8800edf2340 -- (.trap 0xfffff8800edf2340)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff8800edf2510 rbx=0000000000000000 rcx=fffff8a00d0d5fe0
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800a9e285f rsp=fffff8800edf24d0 rbp=fffff8a00d0d5f80
 r8=fffff8a0019ac150  r9=fffff8a0019ac1d0 r10=fffffa8006714e80
r11=fffff8a0019ac1f0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
MSKSSRV!BuildFilterData+0x3ab:
fffff880`0a9e285f f30f6f4920      movdqu  xmm1,xmmword ptr [rcx+20h] ds:fffff8a0`0d0d6000=????????????????????????????????
Resetting default scope
LAST_CONTROL_TRANSFER:  from fffff80002f45c07 to fffff80002ec9a40
STACK_TEXT:  
fffff880`0edf21d8 fffff800`02f45c07 : 00000000`00000050 fffff8a0`0d0d6000 00000000`00000000 fffff880`0edf2340 : nt!KeBugCheckEx
fffff880`0edf21e0 fffff800`02ec7b6e : 00000000`00000000 fffff8a0`0d0d6000 fffffa80`0c23bc00 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x41c2f
fffff880`0edf2340 fffff880`0a9e285f : 00000000`00000000 fffff8a0`0d0d5f80 00000000`0000000c fffff8a0`019ac160 : nt!KiPageFault+0x16e
fffff880`0edf24d0 fffff880`0a9e2d33 : 00000000`00000091 00000000`00000091 fffff8a0`02f69750 ffffffff`80000be4 : MSKSSRV!BuildFilterData+0x3ab
fffff880`0edf2600 fffff880`03dc15a5 : fffffa80`06d86f20 fffffa80`06d86ca0 fffffa80`06d86ca0 fffffa80`06d86f20 : MSKSSRV!PropertySrv+0x2ff
fffff880`0edf2750 fffff880`03dcda1f : fffffa80`06d86ca0 fffffa80`00000001 fffffa80`06d86ca0 fffffa80`0bd7fb70 : ks!KspPropertyHandler+0x735
fffff880`0edf27c0 fffff880`0a9e30d1 : fffffa80`0bd7fb78 00000000`00000000 00000000`00000000 fffffa80`0bd7fb70 : ks!KsPropertyHandler+0x1b
fffff880`0edf2810 fffff880`03dd755f : fffffa80`06d86ed8 00000000`00000000 fffff880`0edf28e0 fffff880`0edf28e0 : MSKSSRV!SrvDispatchIoControl+0x39
fffff880`0edf2840 fffff880`03e2e825 : 00000000`00000001 fffffa80`06d86f20 fffffa80`0bd7fb70 fffffa80`06d86ca0 : ks!DispatchDeviceIoControl+0x4f
fffff880`0edf2870 fffff800`031e58d7 : fffffa80`0a93af20 fffff880`0edf2b60 fffffa80`00000000 fffffa80`0a93af20 : ksthunk!CKernelFilterDevice::DispatchIrp+0x11d
fffff880`0edf28d0 fffff800`031e6136 : 00000000`001fddd8 00000000`0000079c 00000000`00000001 00000000`0014f4d4 : nt!IopXxxControlFile+0x607
fffff880`0edf2a00 fffff800`02ec8cd3 : fffffa80`0bde1060 00000000`001fdd78 fffff880`0edf2a88 00000000`00000000 : nt!NtDeviceIoControlFile+0x56
fffff880`0edf2a70 00000000`749f2e09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`001fe688 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x749f2e09

STACK_COMMAND:  kb
FOLLOWUP_IP: 
MSKSSRV!BuildFilterData+3ab
fffff880`0a9e285f f30f6f4920      movdqu  xmm1,xmmword ptr [rcx+20h]
SYMBOL_STACK_INDEX:  3
SYMBOL_NAME:  MSKSSRV!BuildFilterData+3ab
FOLLOWUP_NAME:  MachineOwner
MODULE_NAME: MSKSSRV
IMAGE_NAME:  MSKSSRV.sys
DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bca92
IMAGE_VERSION:  6.1.7600.16385
FAILURE_BUCKET_ID:  [COLOR=red]X64_0x50_MSKSSRV!BuildFilterData+3ab[/COLOR]
BUCKET_ID:  [COLOR=red]X64_0x50_MSKSSRV!BuildFilterData+3ab[/COLOR]
ANALYSIS_SOURCE:  KM
FAILURE_ID_HASH_STRING:  km:x64_0x50_mskssrv!buildfilterdata+3ab
FAILURE_ID_HASH:  {56b975b1-be8a-ae56-3f79-46a3c1eeee31}
Followup: MachineOwner

Just for starters try running these in safe mode if necessary
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2


Oh by the way nice job on the specs - get tired of having to ask for them

 

[Jay2OR]

Hey ICIT2LOL,

i managed to run the scan and it did say there were some corrupted files which where unable to be fixed, i have attached the SFC file

 

[ICIT2LOL]

Ok Jay I think the chkdsk with those switches /f and /r are worth a try and just out of curiosity and to eliminate any suspicious stuff run these they doe take long
http://www.superantispyware.com/
http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/
ADW download from bleeping computer delete any rubbish found with the malware scans
(with ADW if you are running Kaspersky it will throw it up as malware just override Kaspersky by ignoring it or disabling it for the duration of the scan)

But do the chkdsk first just follow the instruction sin that tutorial I linked - I use Option 2 - from command prompt as I find it a little quicker to set up but the choice is yours of course.