BSOD adding 2gb ddr2 error 0x0000000A and 0x000000A5

[carcar21]

Hello there, sorry for the interruption, but I have a slight problem.

I am using an Acer Aspire 5720Z. I can boot into windows and use it perfectly as long as I am only using 2gb of ram (DDR2).

To be safe I bought 2 INTEGRAL PC2-5300 DDR2 Laptop Memory - 2 GB SODIMM make sure the speeds (667 MHz) and everything (1.8 V) were the same which eliminates that for being one of the problems

However once the 2x 2gb ram sticks are applied I get one of the following errors:

0x0000000A - "IRQL_NOT_LESS_OR_EQUAL"

0x000000A5 - "The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS."

If anyone has a solution, please let me know. Thank you

 

[Laith]

Hey there! Please snap a picture when the BSOD occurs.
Update your BIOS.

 

[carcar21]

Hey Laith, my bios is updated to v1.45 (latest) and I am still having no luck.
I am also not able to take a snapshot of this BSOD because my computer restarts almost instantly after the BSOD.

 

[Laith]

Wait, is the RAM compatible with your motherboard?

 

[carcar21]

Yes it is.

 

[Pauly]

Run memtest with the ram installed and see if you get any errors, its possible the stick of ram and/or the slot is faulty
If errors occur try testing each stick individually

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

 

[torchwood]

533 Mhz is the bus speed for that lappy your 600+ are too high.

Roy