Solved BSOD after i updated windows.

[redakos]

Hello,i was having bsod for the last couple of weeks,so i went and reinstalled windows on another drive,clean install,was working fine for 3 days,today after i installed some windows updates i get the same thing.Computer freezes screen tears up and bsod.

I am using windows 7 home 64 bit
it's a retail edition,the hardware is 2 years old almost and yes i have reinstalled the os.

This is the message i get :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 109
BCP1: A3A039D898457651
BCP2: B3B7465EEAC245A7
BCP3: FFFFF80002F3BC00
BCP4: 0000000000000001
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


i have attached the minidumps.Please if someone can check it out to see if it's hardware or software error.Cause i've been working with that pc for two years and everything was working just fine.

 

[mgorman87]

They all say the same thing. Memory corruption.

I would run Memtest for at least 7-8 passes

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

ASACPI.sys   Sun Mar 27 22:30:36 2005

The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).

atikmpag.sys Wed Jan 26 17:13:33 2011

Update your video drivers. http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx

yk62x64.sys  Mon Feb 23 10:02:27 2009

Update your Marvell Yukon networking driver. http://www.marvell.com/support.html

 

[redakos]

ok so i did all except the memtest. And the marvell could not find any drivers,but i don't suppose that this would be the problem why would it appear now? So i will have memtest run whole night and come back with the results.

 

[redakos]

ok it's memory fault,1 module is having 2 many errors the others none

 

[mgorman87]

Ok. So how many sticks of memory do you have? What are you memory and motherboard specs?

 

[redakos]

I have an asus p5q deluxe.
I have 4 memory modules 1gb each.
3 of them are Crucial ballistix tracer 5-5-5-15 1066MHZ 1gb
1 is kingston 5-5-5-15 1066mhz 1gb ( changed this couple of months ago were all crucial)

one of the crucial has the errors

 

[mgorman87]

Ok. Pull out the kingston memory and leave the two good crucial sticks in there and run the memtest again and see if you get any errors and report back.

Also, make sure the memory settings in the bios are set to stock.

 

[redakos]

No errors from the 2 crucial memories.

 

[mgorman87]

Are you still having issues with your computer?

 

[redakos]

Got a new memory everything works ok now thanks a lot