Harok, I will try to help you with this
You had 4 dump files all dated 10-23-14
3 of them list the sam cause
Code:
nvlddmkm
start end module name
fffff880`0f0af000 fffff880`0fd8b000 [COLOR=red]nvlddmkm[/COLOR] T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Thu Oct 16 07:31:28 2014 (543FBAA0)
CheckSum: 00C97F5B
ImageSize: 00CDC000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
which is your Nvidia graphics driver
the other one lists
Code:
NETIO
start end module name
fffff880`01400000 fffff880`01460000 NETIO (pdb symbols) c:\symcache\netio.pdb\1A3624EA66AA400882BAF5885EE923E52\netio.pdb
Loaded symbol image file: NETIO.SYS
Mapped memory image file: c:\symcache\NETIO.SYS\5294760D60000\NETIO.SYS
Image path: \SystemRoot\system32\drivers\NETIO.SYS
Image name: NETIO.SYS
Timestamp: Tue Nov 26 04:21:01 2013 (5294760D)
CheckSum: 0006433E
ImageSize: 00060000
File version: 6.1.7601.18327
Product version: 6.1.7601.18327
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 3.6 Driver
File date: 00000000.00000000
Which is a Network I/O subsystem from Windows uodate
If you installed Motherboard drivers fro the drive dish, please go to your motherboard web site for your board and update the drivers. The DVD drivers are always out of date.
If you installed any of the Gigabyte Utilities, uninstall every one of them. They are sure BSOD causers.
After doing that please make sure all of the windows updates are installed and there are no more to install.
Then update/reinstall the Nvidia drivers going by this guide.
http://www.sevenforums.com/tutorials/327414-nvidia-drivers-avoid-problems.html
Then please open a elevated command prompt ( click start, type
cmd in the search box,
right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste
sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
Also, what manufacturer and size of PSU do you have, and is this a total custom build, or did you use some part of another system in this build? I would also run
http://www.sevenforums.com/tutorials/433-disk-check.html and the manufacturer's diagnostic program, running both the short and long tests. If you are using an SSD, make sure the firmware is up to date.
