BSOD on HP after installed win8.1 on SSD with HDD on caddy

[rilley]

Hello,

I`m getting BSOD UNEXPECTED_KERNEL_MODE_TRAP on Windows 8.1 x64 Professional on my HP DM4T-2000 LAPTOP, after I`ve moved the old HDD to cd-rom caddy and installed a new Kingstone SSD and a fresh windows 8.1.

I`ve installed the video driver from this file
Catalyst_14.12_Omega_UnifL_v1.0.exe
OR
Catalyst_14.4_WHQL_UnifL_v2.4.exe

In order to have support for ATI/INTEL video driver. But either way I`m getting BSOD...


Just to mention, the BSOD happens when I`m not active on my pc, if I go 5 minutes away, BSOS appears and restarts. If I`m active full time on my laptop, no BSOD happens..

I`ve attached the detailed dump if someone will be able to help me, I will be really appreciated.

 

[ICIT2LOL]

Hello and welcome riley now this one might be better answered in the 8 forum mate it is run and most of us in the 7 forum are members there too.

But in the meantime I have seen some faults in those dump files but am not really sure what they mean because a search for that particular fault has a lot of references to XP?? I will ask for help.

 

[Golden]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7F, {8, fffff80192c7fe70, ffffd00030e40ff0, fffff80190bfd341}

*** WARNING: Unable to verify timestamp for US40fs64.sys
*** ERROR: Module load completed but symbols could not be loaded for US40fs64.sys
Probably caused by : [B][COLOR="Red"]US40fs64.sys[/COLOR][/B] ( US40fs64+7958 )

Followup: MachineOwner
---------

start             end                 module name
fffff800`7169f000 fffff800`716ba000   US40fs64 T (no symbols)           
    Loaded symbol image file: US40fs64.sys
    Image path: \SystemRoot\SysWOW64\drivers\US40fs64.sys
    Image name: US40fs64.sys
    Timestamp:        Fri [B][COLOR="Red"]Jun 24[/COLOR][/B] 19:36:29 [COLOR="red"][B]2011[/B][/COLOR] (4E0461A5)
    CheckSum:         0001DAFB
    ImageSize:        0001B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Everstrike drivers are not listed as supported under Windows 8. You can experiment with an updated Windows 7 driver if you can find one, but I think you should consider uninstalling this software.
Driver Reference Table

ffffd000`30e46080  00000000`00000000
ffffd000`30e46088  ffffe000`fc81b4c8
ffffd000`30e46090  fffff800`71fc1320Unable to load image \SystemRoot\system32\DRIVERS\klflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for[B][COLOR="red"] klflt.sys[/COLOR][/B]
*** ERROR: Module load completed but symbols could not be loaded for klflt.sys
 klflt+0xf320
ffffd000`30e46098  fffff800`71fb3418 klflt+0x1418
ffffd000`30e460a0  ffffc000`bf48dda0
ffffd000`30e460a8  00000000`00000000
ffffd000`30e460b0  ffffe000`fc2fce58

Kaspersky appears to be contributing to the issues - uninstall Kaspersky and use the inbuilt Windows Defender in Windows 8.

Event[0]:
  Log Name: System
  Source: disk
  Date: 2014-11-27T03:46:08.799
  Event ID: 7
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: rilley
  Description: 
The device, \Device\[B][COLOR="Red"]Harddisk1\DR1, has a bad block[/COLOR][/B].

Your eventlog is riddled with these entries in late November - I assume its the hard disk. Run a LONG test using the DOS version of SeaTools:
http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

 

[ICIT2LOL]

As Golden says my friend and for the record I have just got a new laptop that began life with 8 and had problems with my Kaspersky not what probably you are experiencing but if you decide to reinstall it then please use the 2015 version it has a lot of the bugs sorted out and is easier all round. Just so you know you can use the same activation code for it as the older version. But that is only if you decide to try it again.

Also for the record I had to update my BIOS for 7 drivers but you will need to check with HP on that matter.

 

[rilley]

Hello @Golden, @ICIT2LOL, thank you for your reply.

@Golden
About my HDD from CADDY, Yes I think I have some bad sectors because Windows was pointing me some time ago to save my data because my hard it having some problems.

You are suggesting to do a SeaTools and it will fix the hard-drive?

All the BSOD UNNEXPECTED_KERNEL_MODE_TRAP are from the hard-drive? Or Everstrike/Kaspersky applications?
Just to mention, I already have the old windows 7 on my CADDY HDD, when I moved to win8.1 on SSD main + HDD to CADDY, I did not removed the old SO from the HDD, and if I test that windows 7 from HDD, eventought I`m away 3 hours, No BSOD happens...

If I will uninstall those two applications, I will be free of BSOD?


@ICIT2LOL, About Bios update, I did update my bios last year. About the bios, on HP laptops ( ), the bios is kinda locked... So I do not have access to other features, only boot options.

[EDIT]:
Also, other laptop installed drivers in issue founded?

 

[Golden]

You are suggesting to do a SeaTools and it will fix the hard-drive?

No, not neccessarily, and only if its a SeaTools branded hard disk.....it will, however, confirm the extent of the problem.

All the BSOD UNNEXPECTED_KERNEL_MODE_TRAP are from the hard-drive? Or Everstrike/Kaspersky applications?

If I will uninstall those two applications, I will be free of BSOD?

I think its the software, not the hard disk. Both are listed as issues, but I have no way of telling whether its one, or the other, or both - all are possibilities. If I was to guess, I would say its more likely Everstrike clashing with Kaspersky....start by uninstalling Everstrike firstly, then monitoring for further BSOD.