Solved BSOD using OUTLOOK or IDLE, error 101

[tkahn]

reformatted not long ago due to frequent BSOD but now its happening again =/

laptop is about one year old please help!

"Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 101
BCP1: 0000000000000019
BCP2: 0000000000000000
BCP3: FFFFF880009B2180
BCP4: 0000000000000004
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1"

much appreciated!!

 

[koolkat77]

Try what's mentioned on this thread: http://www.sevenforums.com/crash-lo...0x101-clock_watchdog_timeout-troubleshtg.html

 

[tkahn]

thank you, finally resolved it haha

 

[koolkat77]

Thanks for the letting us know.

Posting what you did may be helpful to users suffering the same issue

 

[tkahn]

I ran the disk verifier to find the faulty driver which in my case was:
Daemon tools - dtsoftbus01.sys

it took system restore to get back into windows to disable the verifier but all is well now, thank you!

 

[koolkat77]

I see, let us know if there are any other issues.

BTW, use either MSE or AVG. Two antiviruses may conflict. (Recommend MSE from a BSOD perspective)

You may want to update the following drivers:

0: kd> lmvm rtl8192Ce
start             end                 module name
fffff880`0788d000 fffff880`079f8000   rtl8192Ce T (no symbols)           
    Loaded symbol image file: rtl8192Ce.sys
    Image path: rtl8192Ce.sys
    Image name: rtl8192Ce.sys
    Timestamp:        Fri Dec 03 16:56:21 2010 (4CF8CCD5)
    CheckSum:         00118EED
    ImageSize:        0016B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
...................................................................
0: kd> lmvm nusb3hub
start             end                 module name
fffff880`07cb7000 fffff880`07cd0000   nusb3hub T (no symbols)           
    Loaded symbol image file: nusb3hub.sys
    Image path: nusb3hub.sys
    Image name: nusb3hub.sys
    Timestamp:        Fri Nov 19 07:34:24 2010 (4CE5D420)
    CheckSum:         00016001
    ImageSize:        00019000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

How to Clean Left Over Driver Files with Driver Sweeper

• http://www.sevenforums.com/tutorials/83814-drivers-clean-left-over-files-after-uninstalling.html

rtl8192Ce.sys : Driver Reference Table
nusb3hub.sys : Driver Reference Table

Update to SP-1:

• Learn how to install Windows 7 Service Pack 1 (SP1)

Good luck.

 

[tkahn]

last question would be how do i manually update those drivers??

 

[koolkat77]

From device manager.

Upgrading drivers for pre-existing device:

1. Open http://www.sevenforums.com/tutorials/97061-driver-install-device-manager.html
2. In the Device Manager locate the device you wish to update the drivers for/look for a :warn:
3. Right-click the device and click Properties.
4. In the Properties window click the Driver tab.
5. Click the Update Driver button.
6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive

Once drivers have been installed reboot.

 

[tkahn]

thank you so much!

for the driver sweeper can i just select all and analyze and clean? because i dont see daemon tools or dt tools on the list

 

[koolkat77]

You would have to reinstall all those drivers then.

Find drivers: Drivers and Downloads

- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.

- - The most common drivers are listed on this page: Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads