Solved BSOD witn new SSD intel 520 0xF4 and 0x7a

[basic999]

Received as a present a brand new SSD Intel 520 180GB.
Tried to install Win 7 Ult x64 and Win 7 Pro x64 from different discs. Have the same errors, sometimes 0x000000F4, sometimes 0x0000007a. It happened during installation updates from MS or when I surfing via FireFox.
Contacted Intel support, they advised download different programs to fix the register. Today they ask me contact to microsoft, because it looks like problem with OS. 8=(
Before this I used Win XP x64, Win 7 Pro x64, and Win 7 Ult x64 on this PC on different HDDs without any BSOD.
Also during one day I used this SSD on Lenovo T520 without BSOD.
May I ask about help?
I will provide any information that you need.

What was done:
1. Read this forum 8=)
2. Update firmware of Motherboard and SSD.
3. Installed several times different version of Windows 7 from a different discs (different release).
4. Installed Intel Solid-State Drive toolbox. Full diagnostic scan - everything is OK.
5. Installed RegCure Pro, program fixed some system problems.
6. Contacted Intel support - they did not help at all 8=(
7. Memtest86+ - 5 passes, everything is OK.

 

[Arc]

There is no crash dump in the uploaded zip.

But a stop 0x7A accompanied by a stop 0xF4 is nothing but storage failure.

If the SSD is within warranty, claim for a replacement.

 

[basic999]

Thank you Arc for quick respond. It just happened again after I installed critical windows updates.
stop 0xF4
May I ask you check it?
Intel representative do not answer yet about replacement 8=(

 

[Arc]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa800b18fb30, fffffa800b18fe10, fffff80002f967b0}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa800b18fb30, Terminating object
Arg3: fffffa800b18fe10, Process image file name
Arg4: fffff80002f967b0, Explanatory message (ascii)

Debugging Details:
------------------

----- ETW minidump data unavailable-----

PROCESS_OBJECT: fffffa800b18fb30

IMAGE_NAME:  csrss.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MODULE_NAME: csrss

FAULTING_MODULE: 0000000000000000 

PROCESS_NAME:  csrss.exe

EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.

BUGCHECK_STR:  0xF4_IOERR

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre

STACK_TEXT:  
fffff880`05ff5e38 fffff800`0301fab2 : 00000000`000000f4 00000000`00000003 fffffa80`0b18fb30 fffffa80`0b18fe10 : nt!KeBugCheckEx
fffff880`05ff5e40 fffff800`02fcaabb : ffffffff`ffffffff fffffa80`0b19eb50 fffffa80`0b18fb30 fffffa80`0b18fb30 : nt!PspCatchCriticalBreak+0x92
fffff880`05ff5e80 fffff800`02f4a674 : ffffffff`ffffffff 00000000`00000001 fffffa80`0b18fb30 00000000`00000008 : nt! ?? ::NNGAKEGL::`string'+0x17486
fffff880`05ff5ed0 fffff800`02c90e53 : fffffa80`0b18fb30 fffff800`c0000006 fffffa80`0b19eb50 00000000`01f30e80 : nt!NtTerminateProcess+0xf4
fffff880`05ff5f50 fffff800`02c8d410 : fffff800`02cdc82f fffff880`05ff6a38 fffff880`05ff6790 fffff880`05ff6ae0 : nt!KiSystemServiceCopyEnd+0x13
fffff880`05ff60e8 fffff800`02cdc82f : fffff880`05ff6a38 fffff880`05ff6790 fffff880`05ff6ae0 00000000`77495a38 : nt!KiServiceLinkage
fffff880`05ff60f0 fffff800`02c91242 : fffff880`05ff6a38 00000000`01f70000 fffff880`05ff6ae0 00000000`774a1664 : nt! ?? ::FNODOBFM::`string'+0x488e4
fffff880`05ff6900 fffff800`02c8fdba : 00000000`00000000 00000000`77495a3b fffffa80`0b18fb01 00000000`01f70000 : nt!KiExceptionDispatch+0xc2
fffff880`05ff6ae0 00000000`774c8f56 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a
00000000`01f315a0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x774c8f56


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

IMAGE_VERSION:  

FAILURE_BUCKET_ID:  X64_0xF4_IOERR_IMAGE_csrss.exe

BUCKET_ID:  X64_0xF4_IOERR_IMAGE_csrss.exe

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:x64_0xf4_ioerr_image_csrss.exe

FAILURE_ID_HASH:  {183378f4-a174-8cab-8ad7-e5d860a58439}

Followup: MachineOwner
---------

Stop 0xF4's does not provide much info in the crash dumps, but that is a storage failure. If you get a stop 0x7A again, it will document the storage failure properly.

Can you post a screenshot of all your SSD and HDDs using CrystalDiskInfo - Software - Crystal Dew World

 

[basic999]

Now I have only one attached SSD.
Please check the result of CrystalDickInfo for SSD and HDD.

 

[basic999]

One more BSOD after I added HDD and restarted PC.

 

[Arc]

The same stop 0xF4 continues here.

BugCheck F4, {3, fffffa800ae87b30, fffffa800ae87e10, fffff80002fce7b0}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------

Change the SATA cables. Apply the discs to other unused ports on the motherboard. And test the HDD using Seatools.
http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

Let us know the results.

 

[basic999]

Thank you Arc for help. My mistake, I forgot to show that I change cables...
More info:
Old HDD was on SATA1 and works without any questions.
SSD was with SATA data cable. I connected the SSD to SATA2 (SATA power cable from PC, SATA data cable from SSD set) - sometimes had BSOD. Changed all cables between HDD and SSD (I mean SSD on SATA1 and HDD on SATA2) - still sometimes had BSOD. Leave only SSD on SATA1 (HHD is not attached to power and data SATA) - still sometimes had BSOD. I have 2 more SATA ports - SATA3 with DVD and empty SATA4, and one SATA data cable between DVD and SATA3. What Have I do? I will test my HDD, but do not see any reason to do it, because I have BSOD without attached HDD.

 

[Arc]

If the SSD causes BSODs irrespective of cables and ports, nothing else is there but it is, to blame for the BSODs.

I would say what I said in post #2. If the SSD is within warranty, claim for a replacement.

But, one last thing ... does it BSOD if the HDD only is attached?

 

[basic999]

I think I had BSOD on this PC with this HDD once, it was some years ago.
I asked Intel representative about replacement, still do not have answer. Before they answered on all my emails once per day. Last suggestions was to contact Microsoft and HP representatives 8=)

 

[basic999]

Intel replaced the SSD under the warranty. I received the new one yesterday, it works like a charm.
Thank you for help.

 

[Arc]

Good news.