Constant crash with page fault and memory controller errors

[bronan]

Hi guys

My new i7 system has been running not a day without a BSOD
Everytime i get crashes which contain message which make me think it is the memory

But after 3 new sets of 16 Gb memory i really am now clueless which part is messing up.
The big question is what is failing.
I even had that when i tried enter the bios the whole screen from bios was frozen.

At one monent i installed windows 8 rtm to see if the problem would appear in win 8 Which is now confirmed it does crash win 8 as well.
The question still remains what is causing the constant bsod's
I attached the needed SF file

 

[Arc]

Hello bronan.

The zip you uploaded does not contain any crash dump.
http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

Follow it manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump.

Post it after the next system crash, following the Blue Screen of Death (BSOD) Posting Instructions.

 

[bronan]

hmm i might have forgot it since i had a few more crashes
so hereby the missing minidump files

Been messing around with the memory sets
When i set the memory at its XMP profile speeds 1600/2000 Mhz the system crashes much faster and more often
when i set the system to defaults it obviouly boots into 1333 Mhz memory speeds
at the moment i tried to set them back to 1333 mhz i could not get into the system bios todo so
i had to remove the modules and put in the kingston modules to get the system boot
this far i can say running the memory at slow speed let me do some more before it crashes again

 

[Arc]

Most of your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

And, as most of the stopcodes are 1A, test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight, per RAM module per slot.

One is indicating to Intel(R) 82579V Gigabit Network Connection driver.

  fffff880`009f08c8  fffff880`065b72d4Unable to load image e1c62x64.sys, Win32 error 0n2
  [COLOR=Red]*** WARNING: Unable to verify timestamp for e1c62x64.sys[/COLOR]
  [COLOR=Red]*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys[/COLOR]
  [COLOR=Red] e1c62x64+0x462d4[/COLOR]

Try to update it from Intel Download Center.

Let us know the results.

 

[bronan]

thank you Arc indeed i updated the drivers and updated the bios also.

Now with help from a friends his very expenssive memory kingston KHX2133

The system runs till now without a error on 2 modules 2 x 4 Gb

I upped the speed on this memory set till 2000 Mhz and been running without any BSOD till now.

As soon as i put in one of the 4 x 4 Gb corsair modules sets my system starts messing up
If i just stay at 2 x 4 Gb all keep running smooth

I also tested all memory sets in his system and had as result that the 2000 Mhz set received from rma is also broken.
The corsair 1600 Mhz set runs smooth as babybottoms on his system even at the given 1600 Mhz however with much lower timings then the xmp profile says
It run at cl 11-12-11-30-39 while it should run at 9-9-9-25-33
but as soon as he set those timings even his system crashed

so looks like indeed a combination of bad memory and maybe also driver issues on intel

 

[Arc]

At first you resolve the memory issue .... the driver issue is not a big issue It is easy to replace one driver by another, but a good ram is to be purchased

 

[bronan]

Yes indeed i have to talk to the shop where i bought the memory and second have to wait how corsair responds on this
I am amazed that it turned out to be so hard to get memory working with the asus boards and especially that those advertised speeds are in many cases so damn hard to get them work at xmp profile speeds
these new boards often do not even use the xmp profiles or worse not even contain them anymore
Ofcourse i could be wrong to want faster memory but why release and sell memory speeds up to 2400 mhz, if its almost inpossible to get normal 1333 mhz working .....
On my older mainboards it was an issue but now its almost a crime to get it working, thats not what i call progress

 

[bronan]

Weird but true, not one of the memory vendors in my country does have memory in store above 2 x 4 Gb for this motherboard.
Also all memory selection programs only show either no ram or just that same corsair 1333 Mhz 2 x 4 Gb
While Asus makes alot of advertisements that this board can run 16/32 Gb, nobody can deliver me this far a set which actually runs without bsod
Brands like g.skill and geil do not have any memory configurators as far as i know, the QVL list from asus itself is a joke also.
Most of these numbers are impossible to get or seem not to exist at all.
On the other hand the driver verifier made the system crash at startup
So it might not be solved with the latest drivers i could find for my system

 

[Arc]

Driver verifier identified Paragon Image Mounter (UIM) Plugin driver as the cause of the crash.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C4, {e1, fffff98001530f9c, 0, 0}

*** WARNING: Unable to verify timestamp for uim_vimx64.sys
*** ERROR: Module load completed but symbols could not be loaded for uim_vimx64.sys
Probably caused by : uim_vimx64.sys ( uim_vimx64+1818e )

Followup: MachineOwner
---------

You may uninstall paragon.

Have you replaced the memory sticks? Or not?

 

[bronan]

The program paragon backup and recovery 2012 free removed from my system, going to try run in verifier mode again to see if i can run longer or without error.
The program was installed to make a backup of my current system so that i could recover in case of real disaster.

About the memory am trying to find a replacement set for the corsair memory untill now not succeeded

Current i have lend 8 Gb kingston 1600 Mhz ram from a friend who had them in reserve which runs at 1333 mhz have not tried running at other speed. The memory test (memtest86 ) ran flawless this far.