Driver verifier BSOD, usbport.sys in bluescreenview

[pighead10]

Put on driver verifier on unsigned drivers a few weeks ago. It has crashed before due to driver verifier, but this is the first time anything has appeared in the minidump.

 

[Thedoctor44]

Yes Driver Verifier has found the driver(s) responsible.

I always recommend that before you go changing drivers that creating a system restore point is a good option, please follow these instructions on how to create one.

http://www.sevenforums.com/tutorials/697-system-restore-point-create.html

It indicates that your Bigfoot Networks Killer Xeno PCI-E Gaming Adapter Driver is causing issues. Can you please update it here.

Drivers | VisionTek - High-Performance PC and Mac Upgrades and Enhancements

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C9, {7, fffff88004ee3320, fffff98010e1cee0, 0}

Unable to load image Xeno7x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Xeno7x64.sys
*** ERROR: Module load completed but symbols could not be loaded for Xeno7x64.sys
[COLOR="Red"]Probably caused by : Xeno7x64.sys[/COLOR] ( Xeno7x64+b320 )

fffff880`04ed8000 fffff880`04f01000   Xeno7x64 T (no symbols)           
    Loaded symbol image file: Xeno7x64.sys
    Image path: Xeno7x64.sys
    Image name: Xeno7x64.sys
    Timestamp:        [COLOR="red"]Wed May 18 23:55:16 2011[/COLOR] (4DD44E54)
    CheckSum:         0002E73E
    ImageSize:        00029000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

 

[pighead10]

I tried the installer but apparently a later version of the driver is already installed.

 

[Thedoctor44]

Can you remove the driver from the control panel and try the installer again.
If it doesn't work then you can use your restore point you should have created.