Dump files to read for me

[jenkenis]

Hi guys,im getting alot of BSOD everyday and i want someone to read the dump files.i have attached in rar the latest dmp files.

I would really appreciate if someone helps me. Cheers

 

[Shadowjk]

Dump Files is (.zip) Format...

 

[Shadowjk]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002c83cdc, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS:  0000000000000000 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!KeWaitForSingleObject+17c
fffff800`02c83cdc 4c8938          mov     qword ptr [rax],r15

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  ekrn.exe

TRAP_FRAME:  fffff8800b154600 -- (.trap 0xfffff8800b154600)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffff8a0002e6ac8
rdx=0000000000000028 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002c83cdc rsp=fffff8800b154790 rbp=0000000000000000
 r8=fffff78000000008  r9=0000000000000000 r10=0000000000000000
r11=fffff880031d5180 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po cy
nt!KeWaitForSingleObject+0x17c:
fffff800`02c83cdc 4c8938          mov     qword ptr [rax],r15 ds:00000000`00000000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002c79ca9 to fffff80002c7a740

STACK_TEXT:  


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!KeWaitForSingleObject+17c
fffff800`02c83cdc 4c8938          mov     qword ptr [rax],r15

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nt!KeWaitForSingleObject+17c

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4c1c44a9

FAILURE_BUCKET_ID:  X64_0xA_nt!KeWaitForSingleObject+17c

BUCKET_ID:  X64_0xA_nt!KeWaitForSingleObject+17c

Followup: MachineOwner
---------

Possible Cause - ntkrnlmp.exe - System process for Windows

Please scan with your AV and Run a System File Checker Scan

See http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html?ltr=S For More Information

Please Upload any other BSOD's you receive for a BSOD cannot give a Certain answer as to what is the problem and you may experience more BSOD's

The More we analyse the Better chance we get to finding the solution to your Problem

Many Thanks,
Josh

 

[jenkenis]

Hey Josh thanks for helping.

I did a sfc scan and it showed ok.However after i did a full scan with ESET Smart Security i received another blue screen.I think its called the error Cache manager something.
Is there a chance i have a faulty ram?Its brand new ram

You can find the dump file attached.

I am waiting for your reply.

Thnx

 

[jenkenis]

Josh,

I did download the utility Blue screen viewer and i see that most of the BSOD are from the

ntoskrnl.exe.

What is ntoskrnl.exe? See the picture attached

Please note that all the BSOD started when i upgraded my Asus Maximus Extreme(updated latest firmware) with the following components:

SSD drive
USB3/SATA3 Pci express card
8gb(2gb each of ram) (OCZ 1600MHZ)

 

[Shadowjk]

It is a Kernal file and is part of Windows OS - You said you added more Ram please remove the RAM and See if it stops the BSOD I will Debug the Recent Files

 

[Shadowjk]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CACHE_MANAGER (34)
    See the comment for FAT_FILE_SYSTEM (0x23)
Arguments:
Arg1: 0000000000050830
Arg2: fffff8800337e808
Arg3: fffff8800337e070
Arg4: fffff80002f7edcf

Debugging Details:
------------------


EXCEPTION_RECORD:  fffff8800337e808 -- (.exr 0xfffff8800337e808)
ExceptionAddress: fffff80002f7edcf (nt!MiSectionDelete+0x000000000000003f)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT:  fffff8800337e070 -- (.cxr 0xfffff8800337e070)
rax=fffff8a00ec72110 rbx=6d536d4d00010311 rcx=fffff8a00f5f32a0
rdx=00000000746c6644 rsi=0000000000000000 rdi=fffff8a00f5f32a0
rip=fffff80002f7edcf rsp=fffff8800337ea40 rbp=0000000000000002
 r8=fffffa8010e70750  r9=fffff8800337e8c8 r10=fffffa8007c0b7c0
r11=fffff8800337eab0 r12=fffff80002ec7800 r13=0000000000000000
r14=00000000ffffffff r15=0000000000000001
iopl=0         nv up ei pl zr na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010246
nt!MiSectionDelete+0x3f:
fffff800`02f7edcf 0fba633814      bt      dword ptr [rbx+38h],14h ds:002b:6d536d4d`00010349=????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS:  ffffffffffffffff 

FOLLOWUP_IP: 
nt!MiSectionDelete+3f
fffff800`02f7edcf 0fba633814      bt      dword ptr [rbx+38h],14h

FAULTING_IP: 
nt!MiSectionDelete+3f
fffff800`02f7edcf 0fba633814      bt      dword ptr [rbx+38h],14h

BUGCHECK_STR:  0x34

LAST_CONTROL_TRANSFER:  from fffff80002c928b4 to fffff80002f7edcf

STACK_TEXT:  


SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  nt!MiSectionDelete+3f

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4c1c44a9

STACK_COMMAND:  .cxr 0xfffff8800337e070 ; kb

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x34_nt!MiSectionDelete+3f

BUCKET_ID:  X64_0x34_nt!MiSectionDelete+3f

Followup: MachineOwner
---------

This one did turn out to be Memory Corruption please Remove the recent Stick(s) of RAM

 

[Shadowjk]

For Reference of others who wish to Debug - Dump Files in (.zip) Format

 

[jenkenis]

Hi Josh,

So basically should i test the new rams one by one without overclocking them?With default setting from the bios,my rams are read from 1600MHz to 1066MHz...

 

[jenkenis]

Hi Josh,

New BSOD.Find attached.

Error on dxgkrnl.sys and atikmpag.sys.

After these BSOD,im using the PC with single ram of 2gb now.Lets see the results.

 

[Jonathan_King]

Hello,

Start by uninstalling Daemon Tools; then remove SPTD with this tool: http://www.duplexsecure.com/download/SPTDinst-v174-x64.exe

Update your Yukon wireless drivers; check on your computer manufacturer's site.

yk62x64.sys     Mon Sep 28 04:19:31 2009 (4AC07193)

Now your dump pointed to a graphics error. Your display drivers are updated, so this may be a hardware problem. Do you have another card you can test out?

Run Prime95: http://www.sevenforums.com/tutorials/100352-cpu-stress-test-prime95.html

Run both the Blend and Small FFTs tests.

Finally, enable driver verifier: http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

If the BSODs persist, create a full BSOD report, according to these directions: http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html

...Summary of the dumps:

[font=lucida console]
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Jan  4 16:44:54.088 2011 (UTC - 5:00)
System Uptime: 0 days 0:12:27.883
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+7008 )
DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_TDR_FAULT
BUGCHECK_STR:  0x116
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x116_IMAGE_atikmpag.sys
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  
[/font]

 

[jenkenis]

Thnx for the post Jonathan,i will try to do your steps if the BSOD continues with testing single modules of my rams.

 

[jenkenis]

hi guys,i did a memtest on each module and it seems there was a faulty one.no bsod screen yet

 

[Jonathan_King]

Great, RMA your RAM and hopefully your problems will cease.