New enterprise-focused WAP promises 320Mbps throughput.
Wireless LAN equipment maker Proxim introduced today two new enterprise-focused 802.11n access points: a single-radio unit for $799 (AP800) and a dual-radio model for $1,099 (AP8000). Both models feature 3x3 multiple-in, multiple-out (MIMO) antenna arrays which can operate full tilt using the older, lower-voltage 802.3af power over Ethernet (PoE) standard.
Proxim is a bit late to the market with 802.11n for the enterprise, but marketing vice president Geoff Smith said that the firm was focused on so-called forklift-free upgrades: allowing existing wiring, PoE injectors, and other infrastructure to remain in place while access points were swapped out.
The new Proxim APs aren't unique in their individual characteristics, but combine into the lowest-priced offering with all the bullet points for enterprise on one list; the dual-band AP is $200 to $400 less than competitors' gear. Laboratory testing will have to bear out Proxim's claims, of course.
Both single- and dual-band APs can operate 2.4 GHz or 5 GHz, and work in any combination of 802.11a, b, g, and n modes. Some competitors configure their APs differently or charge more for a choice of both bands in both radios. Proxim supports all 23 of the standard-width US 5 GHz channels, which includes the 5.25 to 5.725GHz range; not all its competitors have that support. Additional channels allow denser deployments: with two radios in one AP each operating in wide-channel 802.11n 5 GHz mode, 4 normal-width channels would be occupied. (This range comprises two bands, UNII-2 and UNII-2 Extended, which require radar sensing and avoidance; few consumer and many enterprise APs haven't yet met or attempted to meet the certification requirement. Newer devices may offer as few as 8 channels in 5 GHz, while grandfathered equipment may support 12 channels.)
Because Proxim, like several competitors, doesn't require a centralized controller, the company aimed to make sure its new APs worked with the baseline PoE standard without having to drop signal power: "We designed it so we didn't have to make any of those tradeoffs," Proxim's Smith said. Smith said companies with existing Proxim APs and mounts would simply untwist the older AP, unplug its PoE Ethernet cable, plug in a new AP800 or AP8000, and rotate it to lock it in place.
Read more at the source.
Later :shock: Ted
Wireless LAN equipment maker Proxim introduced today two new enterprise-focused 802.11n access points: a single-radio unit for $799 (AP800) and a dual-radio model for $1,099 (AP8000). Both models feature 3x3 multiple-in, multiple-out (MIMO) antenna arrays which can operate full tilt using the older, lower-voltage 802.3af power over Ethernet (PoE) standard.
Proxim is a bit late to the market with 802.11n for the enterprise, but marketing vice president Geoff Smith said that the firm was focused on so-called forklift-free upgrades: allowing existing wiring, PoE injectors, and other infrastructure to remain in place while access points were swapped out.
The new Proxim APs aren't unique in their individual characteristics, but combine into the lowest-priced offering with all the bullet points for enterprise on one list; the dual-band AP is $200 to $400 less than competitors' gear. Laboratory testing will have to bear out Proxim's claims, of course.
Both single- and dual-band APs can operate 2.4 GHz or 5 GHz, and work in any combination of 802.11a, b, g, and n modes. Some competitors configure their APs differently or charge more for a choice of both bands in both radios. Proxim supports all 23 of the standard-width US 5 GHz channels, which includes the 5.25 to 5.725GHz range; not all its competitors have that support. Additional channels allow denser deployments: with two radios in one AP each operating in wide-channel 802.11n 5 GHz mode, 4 normal-width channels would be occupied. (This range comprises two bands, UNII-2 and UNII-2 Extended, which require radar sensing and avoidance; few consumer and many enterprise APs haven't yet met or attempted to meet the certification requirement. Newer devices may offer as few as 8 channels in 5 GHz, while grandfathered equipment may support 12 channels.)
Because Proxim, like several competitors, doesn't require a centralized controller, the company aimed to make sure its new APs worked with the baseline PoE standard without having to drop signal power: "We designed it so we didn't have to make any of those tradeoffs," Proxim's Smith said. Smith said companies with existing Proxim APs and mounts would simply untwist the older AP, unplug its PoE Ethernet cable, plug in a new AP800 or AP8000, and rotate it to lock it in place.
Read more at the source.
Later :shock: Ted
My Computer
- Computer Manufacturer/Model Number
- * BFK Customs *
- OS
- W 7 64-bit Ultimate
- CPU
- Intel Q9550 Yorkfield
- Motherboard
- ASUS P5Q Pro
- Memory
- 8GB Dominator 8500C5D
- Graphics Card(s)
- ATI : XFX 5870
- Sound Card
- Realtek HD Audio 7-1
- Monitor(s) Displays
- 1x 47" LCD HDMI & 3x 26" LCD HDMI
- Screen Resolution
- 1920x1080P & 1920x1200
- Hard Drives
- 1x 80GB Intel X25-M G2 SSD : 1x 500GB & 1x 640GB WD Caviar Black(s)
- PSU
- Corsair 620HX
- Case
- Cooler Master RC-690
- Cooling
- Tuniq Tower 120, 2x 140mm and 3x 120mm case fans
- Keyboard
- Microsoft 500
- Mouse
- Razer Diamondback 3G
- Internet Speed
- 14 Mb/s
- Other Info
- 1x Koutech 3Gb/s SATA HDD Hot Swap Rack