Hi. I'm having problems with my printer (Dell V105 ) because every-time I try to print something I get the following: 'Printer unable to communicate with PC.'
I have downloaded the latest driver software from the Dell website which seemed to install properly but the problem remains. Any suggestions please?
My Computer
Computer Manufacturer/Model Number
ESP DESK TOP XB3051Q
OS
Windows 7
CPU
Intel Core 2 Quad Q8300
Motherboard
FOXCONN G31MX SERIES (SOCKET 775)
Memory
2.0 GB RAM SINGLE-CHANNEL DDR2@399MHz 6-6-6-18
Graphics Card(s)
GeForce 8400 GS
Sound Card
REALTEX HIGH DEFINITION
Monitor(s) Displays
F22 on NVIDIA GeForce 8400 GS 1280 x 720 pixels
Screen Resolution
1280 x 720 pixels
Hard Drives
488.39 GB WESTERN DIGITAL WDC WD 5000AAKS-22VIAO ATA DEVICE (IDE) 39 deg. C
I've been all through that Rich but does not help. I have changed the USB connector, unplugged the printer and plugged in again but does not make any difference. I had a remote Windows engineer look at it but all he did was to do as you suggested but could not solve the problem. He said there there was a 'patch' that might solve it but did not get back to me.
My Computer
Computer Manufacturer/Model Number
ESP DESK TOP XB3051Q
OS
Windows 7
CPU
Intel Core 2 Quad Q8300
Motherboard
FOXCONN G31MX SERIES (SOCKET 775)
Memory
2.0 GB RAM SINGLE-CHANNEL DDR2@399MHz 6-6-6-18
Graphics Card(s)
GeForce 8400 GS
Sound Card
REALTEX HIGH DEFINITION
Monitor(s) Displays
F22 on NVIDIA GeForce 8400 GS 1280 x 720 pixels
Screen Resolution
1280 x 720 pixels
Hard Drives
488.39 GB WESTERN DIGITAL WDC WD 5000AAKS-22VIAO ATA DEVICE (IDE) 39 deg. C
Hi. I'm having problems with my printer (Dell V105 ) because every-time I try to print something I get the following: 'Printer unable to communicate with PC.'
I have downloaded the latest driver software from the Dell website which seemed to install properly but the problem remains. Any suggestions please?
Did the printer come with an installation disk?
If yes may I suggest that you remove the printer/software, re-boot and using the installation disk start again and when prompted connect the printer.