Random BSOD after installing windows 7 ultimate x64 and drivers...

[noyeske]

Hello!

I installed multiple windows 7 ultimate X64 but the BSOD is still remaining ... After I install a windows 7 ultimate x64 and the drivers BSOD randomly retunrs ... after 10 min, after 25, but continuosly ...

I attached the diagnostic tools report...
Thans for helping in advance

PS. I checked with multiple tools memmory, and drive, and others, but is oke.
my new laptop details: Lenovo B590 (20206)
Intel Pentium B980 2.4 Ghz

 

[x BlueRobot]

Use these http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html again, your dump file and some other files seem to either blank or corrupted.

 

[noyeske]

Ok, now again the attachment


its ok now?

 

[x BlueRobot]

[COLOR="Red"]BugCheck 3B[/COLOR], {[COLOR="SeaGreen"]c0000005[/COLOR], fffff80002cb84e8, fffff88002bcf100, 0}

Probably caused by : [COLOR="Red"]memory_corruption[/COLOR]

Usual causes:  System service, Device driver, graphics driver, memory

1: kd> [COLOR="SeaGreen"]!error c0000005[/COLOR]
Error code: (NTSTATUS) 0xc0000005 (3221225477) - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

The memory address is either corrupted or invalid, or a poorly written driver is referencing invalid memory addresses.

Remove:

Start Menu\Programs\Driver Genius

These third-party driver installation programs tend to install incorrect and unstable drivers.

Install and perform full scans with:

• Malwarebytes : Free anti-malware download
• Microsoft Security Essentials | Protect against viruses, spyware, and other malware

   Information

Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

   Note

Update all programs before scanning

You can also view this thread for a complete free and lightweight security protection combination:

• http://www.sevenforums.com/system-security/206705-good-free-system-security-combination.html

1: kd> [COLOR="seagreen"]lmvm igdkmd64[/COLOR]
start             end                 module name
fffff880`05ae2000 fffff880`05ffe1c0   igdkmd64 T (no symbols)           
    Loaded symbol image file: igdkmd64.sys
    Image path: igdkmd64.sys
    Image name: igdkmd64.sys
    Timestamp:        [COLOR="Red"]Sat Mar 09 02:10:00 2013[/COLOR] (513A99F8)
    CheckSum:         0052A265
    ImageSize:        0051C1C0
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

• https://downloadcenter.intel.com/Default.aspx

Your onboard Intel Graphics seem to be causing some issues, check for any updates, or perform a clean install of the driver.

1. Download Driver
2. Start rb: Type: Device Manager
3. Expand Display Adapters
4. Right-Click Driver Name, Uninstall
5. Reboot
6. Run Driver Sweeper
7. Reboot
8. Install Downloaded Driver

Driver Sweeper will scan for any left over files from the old driver, old driver files can cause conflicts with new driver installations. Create a System Restore point beforehand, in case any problems or issues arise.

Driver Sweeper:

• http://www.sevenforums.com/tutorials/83814-drivers-clean-left-over-files-after-uninstalling.html

 

[noyeske]

Thank you very much
It will be okey if I install windows 7 ultimate x64 again to everything will be clear. After this I will install only the intel graphics and nvidia driver ... if BSod returns I will attach ok?

 

[noyeske]

I tried to install a fresh windows 7 ultimate x64, and home premium x64 but, BSOD returned when I install... so i cant install anything now ...


this was an error: "page fault by a non-paged area"

I tried to use Ubuntu live Cd, to format partitions with Gparted, but now as well ubuntu come whit some error, and craches ... an still freezes.
The CPU can be bad ? I saw nice error messages in ubuntu withh CPU1 00000x02 an so and so :huh:

 

[x BlueRobot]

The BSOD is more likely to be caused by the hard-drive or RAM, PAGE_FAULT_IN_NONPAGED_AREA, basically means the memory address which was referenced was not valid or didn't exist, therefore the data stored in virtual memory couldn't be paged into physical memory.

Now let's get to the troubleshooting process:

• http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

test|Slot1|Slot2
RAM1| Error | Error
RAM2|Good|Good

It is a RAM, a bad RAM.

But if you have got a result like that:

test|Slot1|Slot2
RAM1| Error |Good
RAM2| Error |Good

It is a motherboard issue. The particular slot is bad.

Run some hard-drive diagnostics and follow these steps:

• Hard Drive Diagnostic Procedure

Find your hard-drive manufacturer and run their tests.

Additional Tests:

• SeaTools for DOS | Seagate
• CrystalDiskInfo - Software - Crystal Dew World

Post a screenshot of Crystal Disk Info summary:

• http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

If you have an SSD, make sure the following are up to date:

• SSD firmware
• BIOS Version
• Chipset Drivers
• Hard disk controller drivers/SATA drivers
• If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Check for any file system errors and bad sectors using Option #2 of:

• http://www.sevenforums.com/tutorials/433-disk-check.html

Use this command with Disk Check:

chkdsk C: /f /r

 

[noyeske]

Ok, memtest is running now, yesterday a cheched with this but only 1 pass I waited. And how to share a screenshot when I cant install any system to this laptop ? I runned drive chesks from Lenovo site, and UEFI tests but it seems everything is ok....

 

[x BlueRobot]

A screenshot for what? Run MemTest86+ overnight, and then check the results in the morning.

 

[noyeske]

Soooo I checked, I waited very long time ... and I got 112 errors until now ... And then is sure to send back to the service centre? The laptop is new, and I have 12 moths guarantee...

 

[x BlueRobot]

If the laptop is still under warranty, then contact customer support, and then a replacement. Your RAM is either bad or the motherboard slot is bad.