Windows 7 login welcome screen keeps on swirling around

[SYSNIMDA32]

Whenever i try to login to windows 7 the welcome screen ring just swirls round and round forever
I've tried many things that the internet has suggested like:

-wipe and reload (The problem comes back when i finish installing all my software and it runs fine and then it happens randomly on reboots)
- i've installed update patches KB2578159 and KB2526870 but it didn't solve the problem
- i've tried clean boots it didn't solve the porblem it still arised when i got out of safe mode
- I've tried startup repair didn't work either after the reboot
- Sfc \scannow worked temporary for 1 or 2 reboots after that the problem would arise again
- Deleted temp and prefetch doesn't work at all
Any suggested update patches, tools, work around methods and more are greatly appreciated

 

[ICIT2LOL]

Hello and welcome SYSNAMDA mate the sfc is often run three times consecutively it's not always productive run the once and then again a bit later.
I would suggest you run this is if you can
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2

When you say wipe and reload do you mean reinstall??

The take a read through this too http://www.sevenforums.com/tutorials/219533-troubleshooting-windows-7-failure-boot.html

 

[SYSNIMDA32]

yes wipe and reload means a clean reinstall
and i've ran sfc /scannow command 10 times for the past day only fixes it temporarily for 1 or 2 reboots
and check disk reported no errors

 

[ICIT2LOL]

Ok mate now the machine I am assuming was running not so good before the reinstall?? Plus what media are you using for the clean install?? and how did you prepare the drive for that install. Personally I use DISKPART clean or clean all to do that so that there are no remnants of the previous install to get in the way or corrupt the new install.
http://www.sevenforums.com/tutorials/52129-disk-clean-clean-all-diskpart-command.html

Another thing we need are some fairly good specs to work with too so can you update them for us/

http://www.sevenforums.com/tutorials/180324-system-info-see-your-system-specs.html

 

[SYSNIMDA32]

yeah the machine had that problem before the reinstall
I prep the installation via a live Windows 8 environment which has minitool partition wizard {YES a live windows 8 environment on a usb stick}
From there i erase the Data on the hard drive by filling the sectors with Zeros
{more about that here: https://www.partitionwizard.com/partitionmagic/wipe-disk.html} and rewrite the MBR
[I leave the partitioning to the windows installer]



My MSI GE62 6QD has
CPU: Intel i7-6700HQ 2.6-3.5GHz
RAM: 16 GB DDR4
GPU: NVIDIA GTX 960M 2GB