windows 7 setup cannot continue due to a corrupted installation file

[jonneymendoza]

Hi. as the title says i keep getting this error whenever i try to install a fresh copy of windows 7.

it displays this error on the "installing updates" step

List of things i have tried:

• Buning another dvd copy of windows
• Enabling Sata insted of AHCI i think its called under BIOS
• creating a bootable USB ISO of windows

The windows 7 iso works perfectly fine on 3 laptops i have reformated recently but on my own Dell xps 15 laptop it simply wont install it due to this error.

it previously had windows 8 which i have wiped out whilst formating the SSD hard drive.

Any suggestions?

 

[whs]

All I can suggest is to make an image of one of the 3 laptops (take the one that is the closest to yours - in specification terms) and dump the image on the SSD. You may have to redo the activation with the key on the COA sticker which is on the bottom of your laptop. And do not forget to also image the 100MB system partition. That you need too.

Then when everything is rolling and you have the essential programs installed, take another image which you can use in case you ever need to reinstall again. For imaging I recommend free Macrium.

http://www.sevenforums.com/tutorials/73828-imaging-free-macrium.html

 

[VistaKing]

Hi Jonney

What did you use to create the USB ISO

Try this http://www.sevenforums.com/tutorials/31541-windows-7-usb-dvd-download-tool.html

 

[jonneymendoza]

i used a app called ISO to USB.

 

[VistaKing]

Is the ISO you created or is it a download from digital river

 

[whs]

I doubt it is a problem with the .iso. It gets stuck with the updates. But then you never know.

 

[VistaKing]

The files are inside the ISO . So it's the ISO .

 

[jonneymendoza]

anyway of editing the iso to remove the windows update files and just installing a vanilla win 7 ?

 

[VistaKing]

What you could do is use Diskpart to create the bootable USB Flash drive . Then copy the contents to the flash drive .

Tool: UltraIso

Download



To create the bootable USB drive . Open up a elevated command prompt and run Diskpart .

   Note

To open an Elevated command prompt . Click on rb: type in CMD in the search box once CMD comes up under Programs (1) right click on CMD and choose Run as administrator

   Tip

You may also press CTRL+SHIFT+ENTER then press ALT+Y to bypass the User Account Control Window

Type in

   Note

Don't forget to press Enter after all the commands. Enter the commands one at a time .

 DISKPART

 LIST DISK

 SELECT DISK #

   Note

# is the number of the USB . Some cases the USB drive is Disk 1

 CLEAN

   Note

The CLEAN command will wipe the USB flash Drive

 CREATE PRIMARY PARTITION

 SELECT PARTITION 1

 ACTIVE

 FORMAT FS=NTFS QUICK

 assign

   Note

The ASSIGN command will assign the Flash drive a letter .

 EXIT

 EXIT

   Note

The 2nd EXIT will close the command prompt