Hello ,
This is a bodge to get round what seems to be a common problem .
Use Map_Network Drive .
Choose a letter for mapping . I just went with the default of \Z: .
In the Folder Box of Browse for Folder enter:
"\\IP Address of NAS"Name of a Folder which exists on the NAS"" [ No Quotes ] .
For example "\\192.168.1.100\CDs" again no quotes .
Note that the browse window may show the name of some other device, i.e. not the NAS,
on your LAN . Press on regardless; I did not for a while .
The IP address etc should now appear on WEX under Computer .
Click and your NAS file structure should appear in your WEx window .
You can change this name and it will still work .
This is a bodge to get round what seems to be a common problem .
Use Map_Network Drive .
Choose a letter for mapping . I just went with the default of \Z: .
In the Folder Box of Browse for Folder enter:
"\\IP Address of NAS"Name of a Folder which exists on the NAS"" [ No Quotes ] .
For example "\\192.168.1.100\CDs" again no quotes .
Note that the browse window may show the name of some other device, i.e. not the NAS,
on your LAN . Press on regardless; I did not for a while .
The IP address etc should now appear on WEX under Computer .
Click and your NAS file structure should appear in your WEx window .
You can change this name and it will still work .
My Computers
-
At a glance
windows 7 Pro 32 bit- OS
- windows 7 Pro 32 bit
-
- Computer type
- PC/Desktop