Windows Update Failed error 800b0100

[b9pl09]

800b0100 is the only code that is poppin up. hopefully I did all of this correctly. thanks

 

[NoelDP]

Here's the SFC error...

2015-07-31 11:26:20, Info                  CSI    00000326 [SR] Repairing 1 components
2015-07-31 11:26:20, Info                  CSI    00000327 [SR] Beginning Verify and Repair transaction
2015-07-31 11:26:20, Info                  CSI    00000328 Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-imagingengine_31bf3856ad364e35_6.1.7601.17514_none_2df065c88c5d1cef\ImagingEngine.dll do not match actual file [l:34{17}]"ImagingEngine.dll" :
  Found: {l:32 b:gexYj1iOf5gx9+qYGp8EzvA0G1rfqclgNeXCyfJP/vc=} Expected: {l:32 b:9zLwUwp//Wxn/3dHYBdLjgE3fcEIWUIhWHDIUjXxHGE=}
2015-07-31 11:26:20, Info                  CSI    00000329 [SR] Cannot repair member file [l:34{17}]"ImagingEngine.dll" of Microsoft-Windows-ImagingEngine, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

There are no apparent errors in the CheckSUR log - but we may need to revisit that later.

I'll post a fix protocol for this error a bit later.

 

[NoelDP]

I've uploaded a file - onvaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\onvaa
hit the enter key - if you get a 'Not Found' error try
DIR D:\onvaa
or
DIR E:\onvaa

The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\onvaa <drive>:\windows\winsxs /y /i /s /v /h

(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply